From: Maxime Ripard <maxime.ripard@bootlin.com>
To: igt-dev@lists.freedesktop.org
Cc: Petri Latvala <petri.latvala@intel.com>,
eben@raspberrypi.org,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: [igt-dev] [PATCH i-g-t v2 12/13] igt: tests: chamelium: Convert VGA tests to do_test_display
Date: Tue, 8 Jan 2019 16:19:58 +0100 [thread overview]
Message-ID: <20190108152001.5367-12-maxime.ripard@bootlin.com> (raw)
In-Reply-To: <cover.58d25323616120b55c27ab28cdac25877a37bd78.1546960696.git-series.maxime.ripard@bootlin.com>
The VGA tests were run so far as part of a separate function. However,
the only difference between that function and the do_test_display
function was the kind of comparison we wanted to use. Indeed, VGA
being an analog output, we can't rely on a pixel perfect image, and
thus only compare the CRCs, but we need to make some more advanced
comparison.
Let's add a new check method, add support for the analog check to
do_test_display and remove the old version.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
tests/kms_chamelium.c | 92 ++++++++++++++++---------------------------
1 file changed, 33 insertions(+), 59 deletions(-)
diff --git a/tests/kms_chamelium.c b/tests/kms_chamelium.c
index 8230cb852cfb..eaea9c18832a 100644
--- a/tests/kms_chamelium.c
+++ b/tests/kms_chamelium.c
@@ -528,6 +528,7 @@ static int chamelium_get_pattern_fb(data_t *data, size_t width, size_t height,
}
enum chamelium_check {
+ CHAMELIUM_CHECK_ANALOG,
CHAMELIUM_CHECK_CRC,
};
@@ -579,6 +580,18 @@ static void do_test_display(data_t *data, struct chamelium_port *port,
free(expected_crc);
free(crc);
+ } else if (check == CHAMELIUM_CHECK_ANALOG) {
+ struct chamelium_frame_dump *dump;
+
+ igt_assert(count == 1);
+
+ dump = chamelium_port_dump_pixels(data->chamelium, port, 0, 0,
+ 0, 0);
+ chamelium_crop_analog_frame(dump, mode->hdisplay,
+ mode->vdisplay);
+ chamelium_assert_analog_frame_match_or_dump(data->chamelium,
+ port, dump, &fb);
+ chamelium_destroy_frame_dump(dump);
}
igt_remove_fb(data->drm_fd, &frame_fb);
@@ -589,8 +602,9 @@ static void test_display_one_mode(data_t *data, struct chamelium_port *port,
uint32_t fourcc, enum chamelium_check check,
int count)
{
- igt_output_t *output;
drmModeConnector *connector;
+ drmModeModeInfo *mode;
+ igt_output_t *output;
igt_plane_t *primary;
reset_state(data, port);
@@ -600,8 +614,14 @@ static void test_display_one_mode(data_t *data, struct chamelium_port *port,
primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
igt_assert(primary);
- do_test_display(data, port, output, &connector->modes[0], fourcc,
- check, count);
+ mode = &connector->modes[0];
+ if (check == CHAMELIUM_CHECK_ANALOG) {
+ bool bridge = check_analog_bridge(data, port);
+
+ igt_assert(!(bridge && prune_vga_mode(data, mode)));
+ }
+
+ do_test_display(data, port, output, mode, fourcc, check, count);
drmModeFreeConnector(connector);
}
@@ -613,6 +633,7 @@ static void test_display_all_modes(data_t *data, struct chamelium_port *port,
igt_output_t *output;
igt_plane_t *primary;
drmModeConnector *connector;
+ bool bridge;
int i;
reset_state(data, port);
@@ -622,9 +643,16 @@ static void test_display_all_modes(data_t *data, struct chamelium_port *port,
primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
igt_assert(primary);
+ if (check == CHAMELIUM_CHECK_ANALOG)
+ bridge = check_analog_bridge(data, port);
+
for (i = 0; i < connector->count_modes; i++) {
drmModeModeInfo *mode = &connector->modes[i];
+ if (check == CHAMELIUM_CHECK_ANALOG && bridge &&
+ prune_vga_mode(data, mode))
+ continue;
+
do_test_display(data, port, output, mode, fourcc, check, count);
}
@@ -675,61 +703,6 @@ test_display_frame_dump(data_t *data, struct chamelium_port *port)
drmModeFreeConnector(connector);
}
-static void
-test_analog_frame_dump(data_t *data, struct chamelium_port *port)
-{
- igt_output_t *output;
- igt_plane_t *primary;
- struct igt_fb fb;
- struct chamelium_frame_dump *frame;
- drmModeModeInfo *mode;
- drmModeConnector *connector;
- int fb_id, i;
- bool bridge;
-
- reset_state(data, port);
-
- output = prepare_output(data, port);
- connector = chamelium_port_get_connector(data->chamelium, port, false);
- primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
- igt_assert(primary);
-
- bridge = check_analog_bridge(data, port);
-
- for (i = 0; i < connector->count_modes; i++) {
- mode = &connector->modes[i];
-
- if (bridge && prune_vga_mode(data, mode))
- continue;
-
- fb_id = igt_create_color_pattern_fb(data->drm_fd,
- mode->hdisplay, mode->vdisplay,
- DRM_FORMAT_XRGB8888,
- LOCAL_DRM_FORMAT_MOD_NONE,
- 0, 0, 0, &fb);
- igt_assert(fb_id > 0);
-
- enable_output(data, port, output, mode, &fb);
-
- igt_debug("Reading frame dumps from Chamelium...\n");
-
- frame = chamelium_port_dump_pixels(data->chamelium, port, 0, 0,
- 0, 0);
-
- chamelium_crop_analog_frame(frame, mode->hdisplay,
- mode->vdisplay);
-
- chamelium_assert_analog_frame_match_or_dump(data->chamelium,
- port, frame, &fb);
-
- chamelium_destroy_frame_dump(frame);
-
- igt_remove_fb(data->drm_fd, &fb);
- }
-
- drmModeFreeConnector(connector);
-}
-
static void
test_hpd_without_ddc(data_t *data, struct chamelium_port *port)
{
@@ -1041,7 +1014,8 @@ igt_main
test_hpd_without_ddc(&data, port);
connector_subtest("vga-frame-dump", VGA)
- test_analog_frame_dump(&data, port);
+ test_display_all_modes(&data, port, DRM_FORMAT_XRGB8888,
+ CHAMELIUM_CHECK_ANALOG, 1);
}
igt_subtest_group {
--
2.20.1
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
next prev parent reply other threads:[~2019-01-08 15:20 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-08 15:19 [igt-dev] [PATCH i-g-t v2 00/13] igt: chamelium: Test YUV buffers using the Chamelium Maxime Ripard
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 01/13] igt: fb: Add subsampling parameters to the formats Maxime Ripard
2019-01-10 9:59 ` Paul Kocialkowski
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 02/13] igt: fb: Reduce tile size alignment for non intel platforms Maxime Ripard
2019-01-10 9:59 ` Paul Kocialkowski
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 03/13] igt: fb: generic YUV convertion function Maxime Ripard
2019-01-10 10:07 ` Paul Kocialkowski
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 04/13] igt: fb: Move i915 YUV buffer clearing code to a function Maxime Ripard
2019-01-10 10:10 ` Paul Kocialkowski
2019-01-10 14:38 ` Ville Syrjälä
2019-01-14 15:13 ` Paul Kocialkowski
2019-01-14 16:40 ` Ville Syrjälä
2019-01-15 16:15 ` Paul Kocialkowski
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 05/13] igt: fb: Move size computation to the common path Maxime Ripard
2019-01-10 10:10 ` Paul Kocialkowski
2019-01-10 10:43 ` Paul Kocialkowski
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 06/13] igt: fb: Refactor dumb buffer allocation path Maxime Ripard
2019-01-10 10:11 ` Paul Kocialkowski
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 07/13] igt: fb: Account for all planes bpp Maxime Ripard
2019-01-10 10:21 ` Paul Kocialkowski
2019-01-21 13:10 ` Maxime Ripard
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 08/13] igt: fb: Clear YUV dumb buffers Maxime Ripard
2019-01-10 10:27 ` Paul Kocialkowski
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 09/13] igt: fb: Rework YUV i915 allocation path Maxime Ripard
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 10/13] igt: fb: Add a bunch of new YUV formats Maxime Ripard
2019-01-10 10:45 ` Paul Kocialkowski
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 11/13] igt: tests: chamelium: Start to unify tests Maxime Ripard
2019-01-10 10:50 ` Paul Kocialkowski
2019-01-21 13:17 ` Maxime Ripard
2019-01-08 15:19 ` Maxime Ripard [this message]
2019-01-10 10:50 ` [igt-dev] [PATCH i-g-t v2 12/13] igt: tests: chamelium: Convert VGA tests to do_test_display Paul Kocialkowski
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 13/13] igt: tests: chamelium: Add YUV formats tests Maxime Ripard
2019-01-10 10:54 ` Paul Kocialkowski
2019-01-08 15:31 ` [igt-dev] ✗ Fi.CI.BAT: failure for igt: chamelium: Test YUV buffers using the Chamelium (rev3) Patchwork
2019-01-08 17:59 ` [igt-dev] ✓ Fi.CI.BAT: success for igt: chamelium: Test YUV buffers using the Chamelium (rev4) Patchwork
2019-01-09 3:11 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190108152001.5367-12-maxime.ripard@bootlin.com \
--to=maxime.ripard@bootlin.com \
--cc=eben@raspberrypi.org \
--cc=igt-dev@lists.freedesktop.org \
--cc=petri.latvala@intel.com \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.