All of lore.kernel.org
 help / color / mirror / Atom feed
From: tskd08@gmail.com
To: linux-media@vger.kernel.org
Cc: mchehab@kernel.org, Akihiro Tsukada <tskd08@gmail.com>
Subject: [PATCH] media: dvb/earth-pt1: fix wrong initialization for demod blocks
Date: Thu, 10 Jan 2019 18:56:23 +0900	[thread overview]
Message-ID: <20190110095623.28070-1-tskd08@gmail.com> (raw)

From: Akihiro Tsukada <tskd08@gmail.com>

earth-pt1 driver was decomposed/restructured by the commit: b732539efdba
("media: dvb: earth-pt1: decompose pt1 driver into sub drivers"),
but it introduced a problem regarding concurrent streaming:
Opening a new terrestial stream stops the reception of an existing,
already-opened satellite stream.

The demod IC in earth-pt1 boards contains 2 pairs of terr. and sat. blocks,
supporting 4 concurrent demodulations, and the above problem was because
the config of a terr. block contained whole reset/init of the pair blocks,
thus each open() of a terrestrial frontend wrongly cleared the config of
its peer satellite block of the demod.
This whole/pair reset should be executed earlier and not on each open().

Fixes: b732539efdba ("media: dvb: earth-pt1: decompose pt1 driver into sub drivers")
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
---
 drivers/media/pci/pt1/pt1.c | 54 ++++++++++++++++++++++++++++++++-----
 1 file changed, 48 insertions(+), 6 deletions(-)

diff --git a/drivers/media/pci/pt1/pt1.c b/drivers/media/pci/pt1/pt1.c
index f4b8030e236..403f88ee3d9 100644
--- a/drivers/media/pci/pt1/pt1.c
+++ b/drivers/media/pci/pt1/pt1.c
@@ -200,16 +200,10 @@ static const u8 va1j5jf8007t_25mhz_configs[][2] = {
 static int config_demod(struct i2c_client *cl, enum pt1_fe_clk clk)
 {
 	int ret;
-	u8 buf[2] = {0x01, 0x80};
 	bool is_sat;
 	const u8 (*cfg_data)[2];
 	int i, len;
 
-	ret = i2c_master_send(cl, buf, 2);
-	if (ret < 0)
-		return ret;
-	usleep_range(30000, 50000);
-
 	is_sat = !strncmp(cl->name, TC90522_I2C_DEV_SAT,
 			  strlen(TC90522_I2C_DEV_SAT));
 	if (is_sat) {
@@ -260,6 +254,46 @@ static int config_demod(struct i2c_client *cl, enum pt1_fe_clk clk)
 	return 0;
 }
 
+/*
+ * Init registers for (each pair of) terrestrial/satellite block in demod.
+ * Note that resetting terr. block also resets its peer sat. block as well.
+ * This function must be called before configuring any demod block
+ * (before pt1_wakeup(), fe->ops.init()).
+ */
+static int pt1_demod_block_init(struct pt1 *pt1)
+{
+	struct i2c_client *cl;
+	u8 buf[2] = {0x01, 0x80};
+	int ret;
+	int i;
+
+	/* reset all terr. & sat. pairs first */
+	for (i = 0; i < PT1_NR_ADAPS; i++) {
+		cl = pt1->adaps[i]->demod_i2c_client;
+		if (strncmp(cl->name, TC90522_I2C_DEV_TER,
+			     strlen(TC90522_I2C_DEV_TER)))
+			continue;
+
+		ret = i2c_master_send(cl, buf, 2);
+		if (ret < 0)
+			return ret;
+		usleep_range(30000, 50000);
+	}
+
+	for (i = 0; i < PT1_NR_ADAPS; i++) {
+		cl = pt1->adaps[i]->demod_i2c_client;
+		if (strncmp(cl->name, TC90522_I2C_DEV_SAT,
+			     strlen(TC90522_I2C_DEV_SAT)))
+			continue;
+
+		ret = i2c_master_send(cl, buf, 2);
+		if (ret < 0)
+			return ret;
+		usleep_range(30000, 50000);
+	}
+	return 0;
+}
+
 static void pt1_write_reg(struct pt1 *pt1, int reg, u32 data)
 {
 	writel(data, pt1->regs + reg * 4);
@@ -987,6 +1021,10 @@ static int pt1_init_frontends(struct pt1 *pt1)
 			goto tuner_release;
 	}
 
+	ret = pt1_demod_block_init(pt1);
+	if (ret < 0)
+		goto fe_unregister;
+
 	return 0;
 
 tuner_release:
@@ -1245,6 +1283,10 @@ static int pt1_resume(struct device *dev)
 	pt1_update_power(pt1);
 	usleep_range(1000, 2000);
 
+	ret = pt1_demod_block_init(pt1);
+	if (ret < 0)
+		goto resume_err;
+
 	for (i = 0; i < PT1_NR_ADAPS; i++)
 		dvb_frontend_reinitialise(pt1->adaps[i]->fe);
 
-- 
2.20.1


             reply	other threads:[~2019-01-10  9:57 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-10  9:56 tskd08 [this message]
2019-02-18 21:04 ` [PATCH] media: dvb/earth-pt1: fix wrong initialization for demod blocks Sean Young
  -- strict thread matches above, loose matches on Subject: below --
2019-02-21 14:47 Akihiro TSUKADA

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190110095623.28070-1-tskd08@gmail.com \
    --to=tskd08@gmail.com \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.