From: Leon Romanovsky <leon@kernel.org>
To: Doug Ledford <dledford@redhat.com>, Jason Gunthorpe <jgg@mellanox.com>
Cc: Leon Romanovsky <leonro@mellanox.com>,
RDMA mailing list <linux-rdma@vger.kernel.org>,
Saeed Mahameed <saeedm@mellanox.com>,
linux-netdev <netdev@vger.kernel.org>
Subject: [PATCH mlx5-next] RDMA/mad: Reduce MAD scope to mlx5_ib only
Date: Sun, 13 Jan 2019 15:57:04 +0200 [thread overview]
Message-ID: <20190113135704.10032-1-leon@kernel.org> (raw)
From: Leon Romanovsky <leonro@mellanox.com>
Management Datagram Interface (MAD) is applicable
only when physical port is Infiniband. It makes MAD
command logic to be completely unrelated to eth/core
parts of mlx5.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
---
drivers/infiniband/hw/mlx5/cmd.c | 37 +++++++++
drivers/infiniband/hw/mlx5/cmd.h | 2 +
drivers/infiniband/hw/mlx5/mad.c | 11 ++-
drivers/infiniband/hw/mlx5/mlx5_ib.h | 3 -
.../net/ethernet/mellanox/mlx5/core/Makefile | 2 +-
drivers/net/ethernet/mellanox/mlx5/core/mad.c | 75 -------------------
include/linux/mlx5/driver.h | 2 -
7 files changed, 47 insertions(+), 85 deletions(-)
delete mode 100644 drivers/net/ethernet/mellanox/mlx5/core/mad.c
diff --git a/drivers/infiniband/hw/mlx5/cmd.c b/drivers/infiniband/hw/mlx5/cmd.c
index 356bccc715ee..6bcc63aaa50b 100644
--- a/drivers/infiniband/hw/mlx5/cmd.c
+++ b/drivers/infiniband/hw/mlx5/cmd.c
@@ -345,3 +345,40 @@ int mlx5_cmd_alloc_q_counter(struct mlx5_core_dev *dev, u16 *counter_id,
counter_set_id);
return err;
}
+
+int mlx5_cmd_mad_ifc(struct mlx5_core_dev *dev, const void *inb, void *outb,
+ u16 opmod, u8 port)
+{
+ int outlen = MLX5_ST_SZ_BYTES(mad_ifc_out);
+ int inlen = MLX5_ST_SZ_BYTES(mad_ifc_in);
+ int err = -ENOMEM;
+ void *data;
+ void *resp;
+ u32 *out;
+ u32 *in;
+
+ in = kzalloc(inlen, GFP_KERNEL);
+ out = kzalloc(outlen, GFP_KERNEL);
+ if (!in || !out)
+ goto out;
+
+ MLX5_SET(mad_ifc_in, in, opcode, MLX5_CMD_OP_MAD_IFC);
+ MLX5_SET(mad_ifc_in, in, op_mod, opmod);
+ MLX5_SET(mad_ifc_in, in, port, port);
+
+ data = MLX5_ADDR_OF(mad_ifc_in, in, mad);
+ memcpy(data, inb, MLX5_FLD_SZ_BYTES(mad_ifc_in, mad));
+
+ err = mlx5_cmd_exec(dev, in, inlen, out, outlen);
+ if (err)
+ goto out;
+
+ resp = MLX5_ADDR_OF(mad_ifc_out, out, response_mad_packet);
+ memcpy(outb, resp,
+ MLX5_FLD_SZ_BYTES(mad_ifc_out, response_mad_packet));
+
+out:
+ kfree(out);
+ kfree(in);
+ return err;
+}
diff --git a/drivers/infiniband/hw/mlx5/cmd.h b/drivers/infiniband/hw/mlx5/cmd.h
index 1e76dc67a369..923a7b93f507 100644
--- a/drivers/infiniband/hw/mlx5/cmd.h
+++ b/drivers/infiniband/hw/mlx5/cmd.h
@@ -63,4 +63,6 @@ int mlx5_cmd_xrcd_alloc(struct mlx5_core_dev *dev, u32 *xrcdn, u16 uid);
int mlx5_cmd_xrcd_dealloc(struct mlx5_core_dev *dev, u32 xrcdn, u16 uid);
int mlx5_cmd_alloc_q_counter(struct mlx5_core_dev *dev, u16 *counter_id,
u16 uid);
+int mlx5_cmd_mad_ifc(struct mlx5_core_dev *dev, const void *inb, void *outb,
+ u16 opmod, u8 port);
#endif /* MLX5_IB_CMD_H */
diff --git a/drivers/infiniband/hw/mlx5/mad.c b/drivers/infiniband/hw/mlx5/mad.c
index 558638468edb..6c529e6f3a01 100644
--- a/drivers/infiniband/hw/mlx5/mad.c
+++ b/drivers/infiniband/hw/mlx5/mad.c
@@ -36,6 +36,7 @@
#include <rdma/ib_smi.h>
#include <rdma/ib_pma.h>
#include "mlx5_ib.h"
+#include "cmd.h"
enum {
MLX5_IB_VENDOR_CLASS1 = 0x9,
@@ -51,9 +52,10 @@ static bool can_do_mad_ifc(struct mlx5_ib_dev *dev, u8 port_num,
return dev->mdev->port_caps[port_num - 1].has_smi;
}
-int mlx5_MAD_IFC(struct mlx5_ib_dev *dev, int ignore_mkey, int ignore_bkey,
- u8 port, const struct ib_wc *in_wc, const struct ib_grh *in_grh,
- const void *in_mad, void *response_mad)
+static int mlx5_MAD_IFC(struct mlx5_ib_dev *dev, int ignore_mkey,
+ int ignore_bkey, u8 port, const struct ib_wc *in_wc,
+ const struct ib_grh *in_grh, const void *in_mad,
+ void *response_mad)
{
u8 op_modifier = 0;
@@ -68,7 +70,8 @@ int mlx5_MAD_IFC(struct mlx5_ib_dev *dev, int ignore_mkey, int ignore_bkey,
if (ignore_bkey || !in_wc)
op_modifier |= 0x2;
- return mlx5_core_mad_ifc(dev->mdev, in_mad, response_mad, op_modifier, port);
+ return mlx5_cmd_mad_ifc(dev->mdev, in_mad, response_mad, op_modifier,
+ port);
}
static int process_mad(struct ib_device *ibdev, int mad_flags, u8 port_num,
diff --git a/drivers/infiniband/hw/mlx5/mlx5_ib.h b/drivers/infiniband/hw/mlx5/mlx5_ib.h
index 819207190343..cead0f97a7b1 100644
--- a/drivers/infiniband/hw/mlx5/mlx5_ib.h
+++ b/drivers/infiniband/hw/mlx5/mlx5_ib.h
@@ -1050,9 +1050,6 @@ void mlx5_ib_db_unmap_user(struct mlx5_ib_ucontext *context, struct mlx5_db *db)
void __mlx5_ib_cq_clean(struct mlx5_ib_cq *cq, u32 qpn, struct mlx5_ib_srq *srq);
void mlx5_ib_cq_clean(struct mlx5_ib_cq *cq, u32 qpn, struct mlx5_ib_srq *srq);
void mlx5_ib_free_srq_wqe(struct mlx5_ib_srq *srq, int wqe_index);
-int mlx5_MAD_IFC(struct mlx5_ib_dev *dev, int ignore_mkey, int ignore_bkey,
- u8 port, const struct ib_wc *in_wc, const struct ib_grh *in_grh,
- const void *in_mad, void *response_mad);
struct ib_ah *mlx5_ib_create_ah(struct ib_pd *pd, struct rdma_ah_attr *ah_attr,
u32 flags, struct ib_udata *udata);
int mlx5_ib_query_ah(struct ib_ah *ibah, struct rdma_ah_attr *ah_attr);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Makefile b/drivers/net/ethernet/mellanox/mlx5/core/Makefile
index 9de9abacf7f6..0257731e6d42 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/Makefile
+++ b/drivers/net/ethernet/mellanox/mlx5/core/Makefile
@@ -13,7 +13,7 @@ obj-$(CONFIG_MLX5_CORE) += mlx5_core.o
#
mlx5_core-y := main.o cmd.o debugfs.o fw.o eq.o uar.o pagealloc.o \
health.o mcg.o cq.o alloc.o qp.o port.o mr.o pd.o \
- mad.o transobj.o vport.o sriov.o fs_cmd.o fs_core.o \
+ transobj.o vport.o sriov.o fs_cmd.o fs_core.o \
fs_counters.o rl.o lag.o dev.o events.o wq.o lib/gid.o \
lib/devcom.o diag/fs_tracepoint.o diag/fw_tracer.o
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/mad.c b/drivers/net/ethernet/mellanox/mlx5/core/mad.c
deleted file mode 100644
index 3a3b0005fd2b..000000000000
--- a/drivers/net/ethernet/mellanox/mlx5/core/mad.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Copyright (c) 2013-2015, Mellanox Technologies. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/mlx5/driver.h>
-#include <linux/mlx5/cmd.h>
-#include "mlx5_core.h"
-
-int mlx5_core_mad_ifc(struct mlx5_core_dev *dev, const void *inb, void *outb,
- u16 opmod, u8 port)
-{
- int outlen = MLX5_ST_SZ_BYTES(mad_ifc_out);
- int inlen = MLX5_ST_SZ_BYTES(mad_ifc_in);
- int err = -ENOMEM;
- void *data;
- void *resp;
- u32 *out;
- u32 *in;
-
- in = kzalloc(inlen, GFP_KERNEL);
- out = kzalloc(outlen, GFP_KERNEL);
- if (!in || !out)
- goto out;
-
- MLX5_SET(mad_ifc_in, in, opcode, MLX5_CMD_OP_MAD_IFC);
- MLX5_SET(mad_ifc_in, in, op_mod, opmod);
- MLX5_SET(mad_ifc_in, in, port, port);
-
- data = MLX5_ADDR_OF(mad_ifc_in, in, mad);
- memcpy(data, inb, MLX5_FLD_SZ_BYTES(mad_ifc_in, mad));
-
- err = mlx5_cmd_exec(dev, in, inlen, out, outlen);
- if (err)
- goto out;
-
- resp = MLX5_ADDR_OF(mad_ifc_out, out, response_mad_packet);
- memcpy(outb, resp,
- MLX5_FLD_SZ_BYTES(mad_ifc_out, response_mad_packet));
-
-out:
- kfree(out);
- kfree(in);
- return err;
-}
-EXPORT_SYMBOL_GPL(mlx5_core_mad_ifc);
diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
index 619d6fee96a1..22712c6b3940 100644
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -898,8 +898,6 @@ int mlx5_core_query_mkey(struct mlx5_core_dev *dev, struct mlx5_core_mkey *mkey,
u32 *out, int outlen);
int mlx5_core_alloc_pd(struct mlx5_core_dev *dev, u32 *pdn);
int mlx5_core_dealloc_pd(struct mlx5_core_dev *dev, u32 pdn);
-int mlx5_core_mad_ifc(struct mlx5_core_dev *dev, const void *inb, void *outb,
- u16 opmod, u8 port);
int mlx5_pagealloc_init(struct mlx5_core_dev *dev);
void mlx5_pagealloc_cleanup(struct mlx5_core_dev *dev);
void mlx5_pagealloc_start(struct mlx5_core_dev *dev);
--
2.19.1
next reply other threads:[~2019-01-13 13:57 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-13 13:57 Leon Romanovsky [this message]
2019-01-14 19:56 ` [PATCH mlx5-next] RDMA/mad: Reduce MAD scope to mlx5_ib only Jason Gunthorpe
2019-01-15 8:05 ` Leon Romanovsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190113135704.10032-1-leon@kernel.org \
--to=leon@kernel.org \
--cc=dledford@redhat.com \
--cc=jgg@mellanox.com \
--cc=leonro@mellanox.com \
--cc=linux-rdma@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=saeedm@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.