All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Vinod Koul <vkoul@kernel.org>
Cc: David S Miller <davem@davemloft.net>,
	netdev@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	Niklas Cassel <niklas.cassel@linaro.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org
Subject: Re: [PATCH v2 1/5] dt-bindings: net: Add Qualcomm ethqos binding
Date: Tue, 15 Jan 2019 15:03:17 -0600	[thread overview]
Message-ID: <20190115210317.GA12206@bogus> (raw)
In-Reply-To: <20190108162926.17806-2-vkoul@kernel.org>

On Tue, Jan 08, 2019 at 09:59:22PM +0530, Vinod Koul wrote:
> Add support for Qualcomm ethqos found in some SoCs like QCS404.
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
>  .../devicetree/bindings/net/qcom,dwmac.txt    | 129 ++++++++++++++++++
>  1 file changed, 129 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/qcom,dwmac.txt
> 
> diff --git a/Documentation/devicetree/bindings/net/qcom,dwmac.txt b/Documentation/devicetree/bindings/net/qcom,dwmac.txt
> new file mode 100644
> index 000000000000..652d2213c3ac
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/qcom,dwmac.txt

qcom,ethqos.txt?

> @@ -0,0 +1,129 @@
> +Qualcomm Ethernet ETHQOS device
> +

Perhaps some details like speeds and version of IP. There's lots of 
variants.

> +This device has following properties:
> +
> +Required properties:
> +
> +- compatible: Should be qcom,ethqos-qcs404"

qcom,qcs404-ethqos

> +
> +- reg: Address and length of the register set for the device
> +
> +- reg-names: Should contain register names "stmmaceth", "rgmii"
> +
> +- clocks: Should contain phandle to clocks
> +
> +- clock-names: Should contain clock names "stmmaceth", "pclk",
> +		"ptp_ref", "rgmii"
> +
> +- interrupts: Should contain phandle to interrupts
> +
> +- interrupt-names: Should contain interrupt names "macirq", "eth_lpi"
> +
> +Rest of the properties are defined in stmmac.txt file in same directory
> +
> +
> +Example:
> +
> +ethernet: ethernet@7a80000 {
> +	compatible = "qcom,ethqos-qcs404";
> +	reg = <0x07a80000 0x10000>,
> +		<0x07a96000 0x100>;
> +	reg-names = "stmmaceth", "rgmii";
> +	clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
> +	clocks = <&gcc GCC_ETH_AXI_CLK>,
> +		<&gcc GCC_ETH_SLAVE_AHB_CLK>,
> +		<&gcc GCC_ETH_PTP_CLK>,
> +		<&gcc GCC_ETH_RGMII_CLK>;
> +	interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
> +			<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
> +	interrupt-names = "macirq", "eth_lpi";
> +	snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
> +	snps,reset-active-low;
> +	snps,axi-config = <&stmmac_axi_setup>;
> +	snps,mtl-rx-config = <&mtl_rx_setup>;
> +	snps,mtl-tx-config = <&mtl_tx_setup>;
> +
> +	snps,txpbl = <8>;
> +	snps,rxpbl = <2>;
> +	snps,aal;
> +	snps,tso;
> +
> +	phy-handle = <&phy1>;
> +	phy-mode = "rgmii";
> +
> +	stmmac_axi_setup: stmmac-axi-config {
> +		snps,wr_osr_lmt = <15>;
> +		snps,rd_osr_lmt = <15>;
> +		snps,blen = <256 128 64 32 0 0 0>;
> +	};
> +
> +	mtl_rx_setup: rx-queues-config {
> +		snps,rx-queues-to-use = <4>;
> +		snps,rx-sched-sp;
> +		queue0 {
> +			snps,dcb-algorithm;
> +			snps,map-to-dma-channel = <0x0>;
> +			snps,priority = <0x0>;
> +		};
> +		queue1 {
> +			snps,dcb-algorithm;
> +			snps,map-to-dma-channel = <0x1>;
> +			snps,priority = <0x1>;
> +		};
> +		queue2 {
> +			snps,dcb-algorithm;
> +			snps,map-to-dma-channel = <0x2>;
> +			snps,priority = <0x1>;
> +		};
> +		queue3 {
> +			snps,dcb-algorithm;
> +			snps,map-to-dma-channel = <0x3>;
> +			snps,priority = <0x1>;
> +		};
> +	};
> +
> +	mtl_tx_setup: tx-queues-config {
> +		snps,tx-queues-to-use = <4>;
> +		snps,tx-sched-wrr;
> +		queue0 {
> +			snps,weight = <0x10>;
> +			snps,dcb-algorithm;
> +			snps,priority = <0x0>;
> +		};
> +		queue1 {
> +			snps,avb-algorithm;
> +			snps,send_slope = <0x1000>;
> +			snps,idle_slope = <0x1000>;
> +			snps,high_credit = <0x3E800>;
> +			snps,low_credit = <0xFFC18000>;
> +			snps,priority = <0x1>;
> +		};
> +		queue2 {
> +			snps,avb-algorithm;
> +			snps,send_slope = <0x1000>;
> +			snps,idle_slope = <0x1000>;
> +			snps,high_credit = <0x3E800>;
> +			snps,low_credit = <0xFFC18000>;
> +			snps,priority = <0x1>;
> +		};
> +		queue3 {
> +			snps,avb-algorithm;
> +			snps,send_slope = <0x1000>;
> +			snps,idle_slope = <0x1000>;
> +			snps,high_credit = <0x3E800>;
> +			snps,low_credit = <0xFFC18000>;
> +			snps,priority = <0x1>;
> +		};
> +	};
> +
> +	mdio {
> +		#address-cells = <0x1>;
> +		#size-cells = <0x0>;
> +		compatible = "snps,dwmac-mdio";
> +		phy1: phy@4 {
> +			device_type = "ethernet-phy";
> +			reg = <0x4>;
> +		};
> +	};
> +
> +};
> -- 
> 2.20.1
> 

  reply	other threads:[~2019-01-15 21:03 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-08 16:29 [PATCH v2 0/5] net: Add support for Qualcomm ethqos Vinod Koul
2019-01-08 16:29 ` [PATCH v2 1/5] dt-bindings: net: Add Qualcomm ethqos binding Vinod Koul
2019-01-15 21:03   ` Rob Herring [this message]
2019-01-17  4:03     ` Vinod Koul
2019-01-08 16:29 ` [PATCH v2 2/5] net: stmmac: Add driver for Qualcomm ethqos Vinod Koul
2019-01-08 16:29 ` [PATCH v2 3/5] MAINTAINER: Add entry for Qualcomm ETHQOS ethernet driver Vinod Koul
2019-01-08 16:29 ` [PATCH v2 4/5] net: phy: at803x: Disable phy delay for RGMII mode Vinod Koul
2019-01-08 17:59   ` Florian Fainelli
2019-01-09  4:35     ` Vinod Koul
2019-01-08 16:29 ` [PATCH v2 5/5] net: dsa: qca8k: disable " Vinod Koul
2019-01-08 18:00   ` Florian Fainelli
2019-01-09  4:43     ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190115210317.GA12206@bogus \
    --to=robh@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=netdev@vger.kernel.org \
    --cc=niklas.cassel@linaro.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.