From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 1/4] MIPS: mscc: ocelot: Add ethernet nodes for Ocelot
Date: Wed, 16 Jan 2019 14:07:40 +0100 [thread overview]
Message-ID: <20190116130743.20539-2-gregory.clement@bootlin.com> (raw)
In-Reply-To: <20190116130743.20539-1-gregory.clement@bootlin.com>
Import Ethernet related nodes from Linux
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
arch/mips/dts/mscc,ocelot.dtsi | 97 +++++++++++++++++++++++++++++++++
arch/mips/dts/ocelot_pcb123.dts | 20 +++++++
2 files changed, 117 insertions(+)
diff --git a/arch/mips/dts/mscc,ocelot.dtsi b/arch/mips/dts/mscc,ocelot.dtsi
index 2592003103..4f3fe356c4 100644
--- a/arch/mips/dts/mscc,ocelot.dtsi
+++ b/arch/mips/dts/mscc,ocelot.dtsi
@@ -112,6 +112,98 @@
status = "disabled";
};
+ switch at 1010000 {
+ pinctrl-0 = <&miim1_pins>;
+ pinctrl-names = "default";
+
+ compatible = "mscc,vsc7514-switch";
+ reg = <0x1010000 0x10000>, /* VTSS_TO_SYS */
+ <0x1030000 0x10000>, /* VTSS_TO_REW */
+ <0x1080000 0x100>, /* VTSS_TO_DEVCPU_QS */
+ <0x10d0000 0x10000>, /* VTSS_TO_HSIO */
+ <0x11e0000 0x100>, /* VTSS_TO_DEV_0 */
+ <0x11f0000 0x100>, /* VTSS_TO_DEV_1 */
+ <0x1200000 0x100>, /* VTSS_TO_DEV_2 */
+ <0x1210000 0x100>, /* VTSS_TO_DEV_3 */
+ <0x1220000 0x100>, /* VTSS_TO_DEV_4 */
+ <0x1230000 0x100>, /* VTSS_TO_DEV_5 */
+ <0x1240000 0x100>, /* VTSS_TO_DEV_6 */
+ <0x1250000 0x100>, /* VTSS_TO_DEV_7 */
+ <0x1260000 0x100>, /* VTSS_TO_DEV_8 */
+ <0x1270000 0x100>, /* NA */
+ <0x1280000 0x100>, /* NA */
+ <0x1800000 0x80000>, /* VTSS_TO_QSYS */
+ <0x1880000 0x10000>; /* VTSS_TO_ANA */
+ reg-names = "sys", "rew", "qs", "hsio", "port0",
+ "port1", "port2", "port3", "port4", "port5",
+ "port6", "port7", "port8", "port9",
+ "port10", "qsys", "ana";
+ interrupts = <21 22>;
+ interrupt-names = "xtr", "inj";
+ status = "okay";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port0: port at 0 {
+ reg = <0>;
+ };
+ port1: port at 1 {
+ reg = <1>;
+ };
+ port2: port at 2 {
+ reg = <2>;
+ };
+ port3: port at 3 {
+ reg = <3>;
+ };
+ port4: port at 4 {
+ reg = <4>;
+ };
+ port5: port at 5 {
+ reg = <5>;
+ };
+ port6: port at 6 {
+ reg = <6>;
+ };
+ port7: port at 7 {
+ reg = <7>;
+ };
+ port8: port at 8 {
+ reg = <8>;
+ };
+ port9: port at 9 {
+ reg = <9>;
+ };
+ port10: port at 10 {
+ reg = <10>;
+ };
+ };
+ };
+
+ mdio0: mdio at 107009c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mscc,ocelot-miim";
+ reg = <0x107009c 0x24>, <0x10700f0 0x8>;
+ interrupts = <14>;
+ status = "disabled";
+
+ phy0: ethernet-phy at 0 {
+ reg = <0>;
+ };
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+ phy2: ethernet-phy at 2 {
+ reg = <2>;
+ };
+ phy3: ethernet-phy at 3 {
+ reg = <3>;
+ };
+ };
+
reset at 1070008 {
compatible = "mscc,ocelot-chip-reset";
reg = <0x1070008 0x4>;
@@ -144,6 +236,11 @@
function = "si";
};
+ miim1_pins: miim1-pins {
+ pins = "GPIO_14", "GPIO_15";
+ function = "miim1";
+ };
+
spi_cs2_pin: spi-cs2-pin {
pins = "GPIO_9";
function = "si";
diff --git a/arch/mips/dts/ocelot_pcb123.dts b/arch/mips/dts/ocelot_pcb123.dts
index c4cb7a1194..a4fa37001f 100644
--- a/arch/mips/dts/ocelot_pcb123.dts
+++ b/arch/mips/dts/ocelot_pcb123.dts
@@ -35,3 +35,23 @@
status = "okay";
mscc,sgpio-ports = <0x00FFFFFF>;
};
+
+&mdio0 {
+ status = "okay";
+};
+
+&port0 {
+ phy-handle = <&phy0>;
+};
+
+&port1 {
+ phy-handle = <&phy1>;
+};
+
+&port2 {
+ phy-handle = <&phy2>;
+};
+
+&port3 {
+ phy-handle = <&phy3>;
+};
--
2.20.1
next prev parent reply other threads:[~2019-01-16 13:07 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-16 13:07 [U-Boot] [PATCH v2 0/4] Add network support for Ocelots SoCs Gregory CLEMENT
2019-01-16 13:07 ` Gregory CLEMENT [this message]
2019-01-16 13:07 ` [U-Boot] [PATCH v2 2/4] net: add MSCC Ocelot switch support Gregory CLEMENT
2019-01-16 13:56 ` Daniel Schwierzeck
2019-01-16 14:21 ` Gregory CLEMENT
2019-01-16 14:43 ` Daniel Schwierzeck
2019-01-16 13:07 ` [U-Boot] [PATCH v2 3/4] MIPS: mscc: ocelot: add switch reset support Gregory CLEMENT
2019-01-16 13:59 ` Daniel Schwierzeck
2019-01-16 14:37 ` Gregory CLEMENT
2019-01-16 15:34 ` Daniel Schwierzeck
2019-01-16 13:07 ` [U-Boot] [PATCH v2 4/4] configs: mscc_ocelot: add network support Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190116130743.20539-2-gregory.clement@bootlin.com \
--to=gregory.clement@bootlin.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.