From: "Michael S. Tsirkin" <mst@redhat.com>
To: Yang Zhong <yang.zhong@intel.com>
Cc: qemu-devel@nongnu.org, peter.maydell@linaro.org,
thuth@redhat.com, sameo@linux.intel.com, pbonzini@redhat.com,
ehabkost@redhat.com
Subject: Re: [Qemu-devel] [RFC PATCH v3 29/43] build: convert pci.mak to Kconfig
Date: Fri, 18 Jan 2019 11:36:56 -0500 [thread overview]
Message-ID: <20190118113317-mutt-send-email-mst@kernel.org> (raw)
In-Reply-To: <20190118112410.3010-30-yang.zhong@intel.com>
On Fri, Jan 18, 2019 at 07:23:56PM +0800, Yang Zhong wrote:
> From: Paolo Bonzini <pbonzini@redhat.com>
>
> Instead of including the same list of devices for each target,
> set CONFIG_PCI to true, and make the devices default to present
> whenever PCI is available.
>
> Done mostly with the following script:
>
> while read i; do
> i=${i%=y}; i=${i#CONFIG_}
> sed -i -e'/^config '$i'$/!b' -en \
> -e'a\' -e' default y\' -e' depends on PCI' \
> `grep -lw $i hw/*/Kconfig`
> done < default-configs/pci.mak
>
> followed by replacing a few "depends on" clauses with "select"
> whenever the symbol is not really related to PCI.
>
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
> Signed-off-by: Yang Zhong <yang.zhong@intel.com>
> Reviewed-by: Thomas Huth <thuth@redhat.com>
Pls CC me directly on pci patches.
> ---
> default-configs/alpha-softmmu.mak | 2 +-
> default-configs/arm-softmmu.mak | 2 +-
> default-configs/hppa-softmmu.mak | 2 +-
> default-configs/i386-softmmu.mak | 4 +--
> default-configs/mips-softmmu-common.mak | 2 +-
> default-configs/pci.mak | 48 -------------------------
> default-configs/ppc-softmmu.mak | 2 +-
> default-configs/riscv32-softmmu.mak | 3 +-
> default-configs/riscv64-softmmu.mak | 3 +-
> default-configs/sh4-softmmu.mak | 2 +-
> default-configs/sh4eb-softmmu.mak | 2 +-
> default-configs/sparc64-softmmu.mak | 2 +-
> hw/audio/Kconfig | 6 ++++
> hw/block/Kconfig | 2 ++
> hw/char/Kconfig | 2 ++
> hw/display/Kconfig | 15 +++++++-
> hw/ide/Kconfig | 3 ++
> hw/ipack/Kconfig | 2 ++
> hw/misc/Kconfig | 4 +++
> hw/net/Kconfig | 23 ++++++++++++
> hw/pci-bridge/Kconfig | 4 +++
> hw/pci-host/Kconfig | 4 +++
> hw/scsi/Kconfig | 11 ++++++
> hw/sd/Kconfig | 3 ++
> hw/usb/Kconfig | 10 ++++++
> hw/virtio/Kconfig | 3 ++
> hw/watchdog/Kconfig | 2 ++
> 27 files changed, 104 insertions(+), 64 deletions(-)
> delete mode 100644 default-configs/pci.mak
>
> diff --git a/default-configs/alpha-softmmu.mak b/default-configs/alpha-softmmu.mak
> index 400dff3c1c..e583177e79 100644
> --- a/default-configs/alpha-softmmu.mak
> +++ b/default-configs/alpha-softmmu.mak
> @@ -1,7 +1,7 @@
> # Default configuration for alpha-softmmu
>
> -include pci.mak
> include usb.mak
> +CONFIG_PCI=y
> CONFIG_SERIAL=y
> CONFIG_SERIAL_ISA=y
> CONFIG_I82374=y
> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
> index 05e085a75f..8734c508ee 100644
> --- a/default-configs/arm-softmmu.mak
> +++ b/default-configs/arm-softmmu.mak
> @@ -1,7 +1,7 @@
> # Default configuration for arm-softmmu
>
> -include pci.mak
> include usb.mak
> +CONFIG_PCI=y
> CONFIG_VGA=y
> CONFIG_NAND=y
> CONFIG_ECC=y
> diff --git a/default-configs/hppa-softmmu.mak b/default-configs/hppa-softmmu.mak
> index 846e9f0ba6..673ae5a7cf 100644
> --- a/default-configs/hppa-softmmu.mak
> +++ b/default-configs/hppa-softmmu.mak
> @@ -1,5 +1,5 @@
> -include pci.mak
> include usb.mak
> +CONFIG_PCI=y
> CONFIG_SERIAL=y
> CONFIG_SERIAL_ISA=y
> CONFIG_ISA_BUS=y
> diff --git a/default-configs/i386-softmmu.mak b/default-configs/i386-softmmu.mak
> index f71284516c..b868d1f4e6 100644
> --- a/default-configs/i386-softmmu.mak
> +++ b/default-configs/i386-softmmu.mak
> @@ -1,11 +1,10 @@
> # Default configuration for i386-softmmu
>
> -include pci.mak
> +CONFIG_PCI=y
> include sound.mak
> include usb.mak
> include hyperv.mak
> CONFIG_VGA_ISA=y
> -CONFIG_VGA_CIRRUS=y
> CONFIG_VMWARE_VGA=y
> CONFIG_VMXNET3_PCI=y
> CONFIG_VIRTIO_VGA=y
> @@ -52,7 +51,6 @@ CONFIG_MEM_DEVICE=y
> CONFIG_DIMM=y
> CONFIG_NVDIMM=y
> CONFIG_ACPI_NVDIMM=y
> -CONFIG_PCIE_PORT=y
> CONFIG_XIO3130=y
> CONFIG_IOH3420=y
> CONFIG_I82801B11=y
> diff --git a/default-configs/mips-softmmu-common.mak b/default-configs/mips-softmmu-common.mak
> index 479fb4d900..ecb45276f3 100644
> --- a/default-configs/mips-softmmu-common.mak
> +++ b/default-configs/mips-softmmu-common.mak
> @@ -1,8 +1,8 @@
> # Common mips*-softmmu CONFIG defines
>
> -include pci.mak
> include sound.mak
> include usb.mak
> +CONFIG_PCI=y
> CONFIG_ESP=y
> CONFIG_SCSI=y
> CONFIG_VGA_ISA=y
> diff --git a/default-configs/pci.mak b/default-configs/pci.mak
> deleted file mode 100644
> index 553b1905de..0000000000
> --- a/default-configs/pci.mak
> +++ /dev/null
> @@ -1,48 +0,0 @@
> -CONFIG_PCI=y
> -CONFIG_PCIE=y
> -# For now, CONFIG_IDE_CORE requires ISA, so we enable it here
> -CONFIG_ISA_BUS=y
> -CONFIG_VIRTIO_PCI=y
> -include virtio.mak
> -CONFIG_USB_UHCI=y
> -CONFIG_USB_OHCI=y
> -CONFIG_USB_EHCI=y
> -CONFIG_USB_XHCI=y
> -CONFIG_USB_XHCI_NEC=y
> -CONFIG_NE2000_PCI=y
> -CONFIG_EEPRO100_PCI=y
> -CONFIG_PCNET_PCI=y
> -CONFIG_PCNET_COMMON=y
> -CONFIG_AC97=y
> -CONFIG_HDA=y
> -CONFIG_ES1370=y
> -CONFIG_SCSI=y
> -CONFIG_LSI_SCSI_PCI=y
> -CONFIG_VMW_PVSCSI_SCSI_PCI=y
> -CONFIG_MEGASAS_SCSI_PCI=y
> -CONFIG_MPTSAS_SCSI_PCI=y
> -CONFIG_RTL8139_PCI=y
> -CONFIG_E1000_PCI=y
> -CONFIG_E1000E_PCI=y
> -CONFIG_AHCI=y
> -CONFIG_ESP=y
> -CONFIG_ESP_PCI=y
> -CONFIG_SERIAL=y
> -CONFIG_SERIAL_ISA=y
> -CONFIG_SERIAL_PCI=y
> -CONFIG_CAN_BUS=y
> -CONFIG_CAN_SJA1000=y
> -CONFIG_CAN_PCI=y
> -CONFIG_IPACK=y
> -CONFIG_WDT_IB6300ESB=y
> -CONFIG_PCI_TESTDEV=y
> -CONFIG_NVME_PCI=y
> -CONFIG_SD=y
> -CONFIG_SDHCI=y
> -CONFIG_EDU=y
> -CONFIG_VGA=y
> -CONFIG_VGA_PCI=y
> -CONFIG_BOCHS_DISPLAY=y
> -CONFIG_IVSHMEM_DEVICE=$(CONFIG_IVSHMEM)
> -CONFIG_ROCKER=y
> -CONFIG_EDID=y
> diff --git a/default-configs/ppc-softmmu.mak b/default-configs/ppc-softmmu.mak
> index 7f80f0ccba..2d69adfabd 100644
> --- a/default-configs/ppc-softmmu.mak
> +++ b/default-configs/ppc-softmmu.mak
> @@ -1,8 +1,8 @@
> # Default configuration for ppc-softmmu
>
> -include pci.mak
> include sound.mak
> include usb.mak
> +CONFIG_PCI=y
>
> # For embedded PPCs:
> CONFIG_PPC4XX=y
> diff --git a/default-configs/riscv32-softmmu.mak b/default-configs/riscv32-softmmu.mak
> index 2dccd512d2..d45f01bdcf 100644
> --- a/default-configs/riscv32-softmmu.mak
> +++ b/default-configs/riscv32-softmmu.mak
> @@ -1,8 +1,7 @@
> # Default configuration for riscv-softmmu
>
> -include pci.mak
> include usb.mak
> -
> +CONFIG_PCI=y
> CONFIG_SERIAL=y
> CONFIG_VIRTIO_MMIO=y
>
> diff --git a/default-configs/riscv64-softmmu.mak b/default-configs/riscv64-softmmu.mak
> index 2dccd512d2..d45f01bdcf 100644
> --- a/default-configs/riscv64-softmmu.mak
> +++ b/default-configs/riscv64-softmmu.mak
> @@ -1,8 +1,7 @@
> # Default configuration for riscv-softmmu
>
> -include pci.mak
> include usb.mak
> -
> +CONFIG_PCI=y
> CONFIG_SERIAL=y
> CONFIG_VIRTIO_MMIO=y
>
> diff --git a/default-configs/sh4-softmmu.mak b/default-configs/sh4-softmmu.mak
> index 1fdb009151..8382504d11 100644
> --- a/default-configs/sh4-softmmu.mak
> +++ b/default-configs/sh4-softmmu.mak
> @@ -1,7 +1,7 @@
> # Default configuration for sh4-softmmu
>
> -include pci.mak
> include usb.mak
> +CONFIG_PCI=y
> CONFIG_SERIAL=y
> CONFIG_SERIAL_ISA=y
> CONFIG_PTIMER=y
> diff --git a/default-configs/sh4eb-softmmu.mak b/default-configs/sh4eb-softmmu.mak
> index 3b550a5fe8..a77e1538e9 100644
> --- a/default-configs/sh4eb-softmmu.mak
> +++ b/default-configs/sh4eb-softmmu.mak
> @@ -1,7 +1,7 @@
> # Default configuration for sh4eb-softmmu
>
> -include pci.mak
> include usb.mak
> +CONFIG_PCI=y
> CONFIG_SERIAL=y
> CONFIG_SERIAL_ISA=y
> CONFIG_PTIMER=y
> diff --git a/default-configs/sparc64-softmmu.mak b/default-configs/sparc64-softmmu.mak
> index 1fae4888db..db393d9eb3 100644
> --- a/default-configs/sparc64-softmmu.mak
> +++ b/default-configs/sparc64-softmmu.mak
> @@ -1,7 +1,7 @@
> # Default configuration for sparc64-softmmu
>
> -include pci.mak
> include usb.mak
> +CONFIG_PCI=y
> CONFIG_M48T59=y
> CONFIG_PTIMER=y
> CONFIG_SERIAL=y
> diff --git a/hw/audio/Kconfig b/hw/audio/Kconfig
> index 207baee6e1..af34bbcf0c 100644
> --- a/hw/audio/Kconfig
> +++ b/hw/audio/Kconfig
> @@ -3,9 +3,13 @@ config SB16
>
> config ES1370
> bool
> + default y
> + depends on PCI
>
> config AC97
> bool
> + default y
> + depends on PCI
>
> config ADLIB
> bool
> @@ -18,6 +22,8 @@ config CS4231A
>
> config HDA
> bool
> + default y
> + depends on PCI
>
> config PCSPK
> bool
> diff --git a/hw/block/Kconfig b/hw/block/Kconfig
> index 9d418bce4d..3710434436 100644
> --- a/hw/block/Kconfig
> +++ b/hw/block/Kconfig
> @@ -21,6 +21,8 @@ config ONENAND
>
> config NVME_PCI
> bool
> + default y
> + depends on PCI
>
> config VIRTIO_BLK
> bool
> diff --git a/hw/char/Kconfig b/hw/char/Kconfig
> index 26c13243cf..1ed6f0dbce 100644
> --- a/hw/char/Kconfig
> +++ b/hw/char/Kconfig
> @@ -15,6 +15,8 @@ config SERIAL_ISA
>
> config SERIAL_PCI
> bool
> + default y
> + depends on PCI
>
> config VIRTIO_SERIAL
> bool
> diff --git a/hw/display/Kconfig b/hw/display/Kconfig
> index 132aeffdbe..6bcfc10bcb 100644
> --- a/hw/display/Kconfig
> +++ b/hw/display/Kconfig
> @@ -9,6 +9,9 @@ config ADS7846
>
> config VGA_CIRRUS
> bool
> + default y
> + depends on PCI
> + select VGA
>
> config G364FB
> bool
> @@ -30,6 +33,9 @@ config SSD0323
>
> config VGA_PCI
> bool
> + default y
> + depends on PCI
> + select VGA
>
> config VGA_ISA
> bool
> @@ -39,9 +45,15 @@ config VGA_ISA_MM
>
> config VMWARE_VGA
> bool
> + default y
> + depends on PCI
> + select VGA
>
> config BOCHS_DISPLAY
> bool
> + default y
> + depends on PCI
> + select VGA
>
> config BLIZZARD
> bool
> @@ -67,7 +79,8 @@ config VGA
>
> config QXL
> bool
> - depends on SPICE
> + depends on SPICE && PCI
> + select VGA
>
> config VIRTIO_GPU
> bool
> diff --git a/hw/ide/Kconfig b/hw/ide/Kconfig
> index fe27705790..3778580df2 100644
> --- a/hw/ide/Kconfig
> +++ b/hw/ide/Kconfig
> @@ -7,6 +7,7 @@ config IDE_QDEV
>
> config IDE_PCI
> bool
> + depends on PCI
> select IDE_CORE
>
> config IDE_ISA
> @@ -42,6 +43,8 @@ config MICRODRIVE
>
> config AHCI
> bool
> + default y
> + depends on PCI
> select IDE_QDEV
>
> config IDE_SII3112
> diff --git a/hw/ipack/Kconfig b/hw/ipack/Kconfig
> index 481e0d2e64..98bd21cf0f 100644
> --- a/hw/ipack/Kconfig
> +++ b/hw/ipack/Kconfig
> @@ -1,2 +1,4 @@
> config IPACK
> bool
> + default y
> + depends on PCI
> diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig
> index cc8dbed24e..1ca4b2464e 100644
> --- a/hw/misc/Kconfig
> +++ b/hw/misc/Kconfig
> @@ -21,9 +21,13 @@ config ISA_TESTDEV
>
> config PCI_TESTDEV
> bool
> + default y
> + depends on PCI
>
> config EDU
> bool
> + default y
> + depends on PCI
>
> config PCA9552
> bool
> diff --git a/hw/net/Kconfig b/hw/net/Kconfig
> index 6b2ec971b5..35204260fa 100644
> --- a/hw/net/Kconfig
> +++ b/hw/net/Kconfig
> @@ -3,27 +3,42 @@ config DP8393X
>
> config NE2000_PCI
> bool
> + default y
> + depends on PCI
>
> config EEPRO100_PCI
> bool
> + default y
> + depends on PCI
>
> config PCNET_PCI
> bool
> + default y
> + depends on PCI
> + select PCNET_COMMON
>
> config PCNET_COMMON
> bool
>
> config E1000_PCI
> bool
> + default y
> + depends on PCI
>
> config E1000E_PCI
> bool
> + default y
> + depends on PCIE
>
> config RTL8139_PCI
> bool
> + default y
> + depends on PCI
>
> config VMXNET3_PCI
> bool
> + default y
> + depends on PCI
>
> config SMC91C111
> bool
> @@ -81,12 +96,20 @@ config ETSEC
>
> config ROCKER
> bool
> + default y
> + depends on PCI
>
> config CAN_BUS
> bool
>
> config CAN_PCI
> bool
> + default y
> + depends on PCI
> + select CAN_BUS
>
> config CAN_SJA1000
> bool
> + default y
> + depends on PCI
> + select CAN_BUS
> diff --git a/hw/pci-bridge/Kconfig b/hw/pci-bridge/Kconfig
> index bb19b7aac1..d54d878023 100644
> --- a/hw/pci-bridge/Kconfig
> +++ b/hw/pci-bridge/Kconfig
> @@ -1,14 +1,18 @@
> config PCIE_PORT
> bool
> + default y
> + depends on PCIE
>
> config PXB
> bool
>
> config XIO3130
> bool
> + depends on PCIE
>
> config IOH3420
> bool
> + depends on PCIE
>
> config I82801B11
> bool
> diff --git a/hw/pci-host/Kconfig b/hw/pci-host/Kconfig
> index 359df1d239..20c3de37a3 100644
> --- a/hw/pci-host/Kconfig
> +++ b/hw/pci-host/Kconfig
> @@ -24,12 +24,16 @@ config PCI_PIIX
>
> config PCI_Q35
> bool
> + select PCIE
ok...
> config PCI_GENERIC
> bool
> + select PCIE
>
why is this?
> config PCI_XILINX
> bool
> + select PCIE
>
> config PCI_DESIGNWARE
> bool
> + select PCIE
sure about the above?
> diff --git a/hw/scsi/Kconfig b/hw/scsi/Kconfig
> index eb78478ef0..812a12522b 100644
> --- a/hw/scsi/Kconfig
> +++ b/hw/scsi/Kconfig
> @@ -3,21 +3,32 @@ config SCSI
>
> config LSI_SCSI_PCI
> bool
> + default y
> + depends on PCI
>
> config MPTSAS_SCSI_PCI
> bool
> + default y
> + depends on PCI
>
> config MEGASAS_SCSI_PCI
> bool
> + default y
> + depends on PCI
>
> config VMW_PVSCSI_SCSI_PCI
> bool
> + default y
> + depends on PCI
>
> config ESP
> bool
>
> config ESP_PCI
> bool
> + default y
> + depends on PCI
> + select ESP
>
> config VIRTIO_SCSI
> bool
> diff --git a/hw/sd/Kconfig b/hw/sd/Kconfig
> index 4f43bbb352..90ac74950a 100644
> --- a/hw/sd/Kconfig
> +++ b/hw/sd/Kconfig
> @@ -9,3 +9,6 @@ config SD
>
> config SDHCI
> bool
> + default y
> + depends on PCI
> + select SD
> diff --git a/hw/usb/Kconfig b/hw/usb/Kconfig
> index cbf5c5d761..f23c542d27 100644
> --- a/hw/usb/Kconfig
> +++ b/hw/usb/Kconfig
> @@ -3,21 +3,31 @@ config USB
>
> config USB_UHCI
> bool
> + default y
> + depends on PCI
>
> config USB_OHCI
> bool
> + default y
> + depends on PCI
>
> config USB_EHCI
> bool
> + default y
> + depends on PCI
>
> config USB_EHCI_SYSBUS
> bool
>
> config USB_XHCI
> bool
> + default y
> + depends on PCI
>
> config USB_XHCI_NEC
> bool
> + default y
> + depends on PCI
>
> config USB_MUSB
> bool
> diff --git a/hw/virtio/Kconfig b/hw/virtio/Kconfig
> index ebf18124fb..aabd6d4d96 100644
> --- a/hw/virtio/Kconfig
> +++ b/hw/virtio/Kconfig
> @@ -6,6 +6,9 @@ config VIRTIO_RNG
>
> config VIRTIO_PCI
> bool
> + default y
> + depends on PCI
> + select VIRTIO
>
> config VIRTIO_MMIO
> bool
> diff --git a/hw/watchdog/Kconfig b/hw/watchdog/Kconfig
> index cd0244f4e1..4e24bf8240 100644
> --- a/hw/watchdog/Kconfig
> +++ b/hw/watchdog/Kconfig
> @@ -3,6 +3,8 @@ config CMSDK_APB_WATCHDOG
>
> config WDT_IB6300ESB
> bool
> + default y
> + depends on PCI
>
> config WDT_IB700
> bool
> --
> 2.17.1
>
next prev parent reply other threads:[~2019-01-18 16:37 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-18 11:23 [Qemu-devel] [RFC PATCH v3 00/43] Support Kconfig in QEMU Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 01/43] build: actually use CONFIG_PAM Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 02/43] hw/i386/Makefile.objs: Build pc_piix* and pc_q35 boards Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 03/43] hw/arm/Makefile.objs: CONFIG_VIRT created for virt board Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 04/43] hw/m68k/Makefile.objs: Conditionally build boards Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 05/43] hw/microblaze/Makefile.objs: Create configs for petalogix and xilinx boards Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 06/43] hw/mips/Makefile.objs: Create CONFIG_* for r4k, malta, mipssim boards Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 07/43] hw/ppc/Makefile.objs: Build all boards conditinally with CONFIG_* Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 08/43] hw/sh4/Makefile.objs: New CONFIG_* varibales created for sh4 boards and device Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 09/43] hw/sparc/Makefile.objs: CONFIG_* for sun4m and leon3 created Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 10/43] hw/lm32/Makefile.objs: Conditionally build lm32 and milkmyst Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 11/43] hw/xtensa/Makefile.objs: Build xtensa_sim and xtensa_fpga conditionally Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 12/43] hw/nios2/Makefile.objs: Conditionally build nios2 Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 13/43] hw/riscv/Makefile.objs: Create CONFIG_* for riscv boards Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 14/43] hw/sparc64/Makefile.objs: Create CONFIG_* for sparc64 Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 15/43] hw/alpha/Makefile.objs: Create CONFIG_* for alpha Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 16/43] hw/cris/Makefile.objs: Create CONFIG_* for cris Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 17/43] hw/hppa/Makefile.objs: Create CONFIG_* for hppa Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 18/43] hw/moxie/Makefile.objs: Conditionally build moxie Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 19/43] hw/openrisc/Makefile.objs: Create CONFIG_* for openrisc Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 20/43] hw/tricore/Makefile.objs: Create CONFIG_* for tricore Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 21/43] minikconfig: add parser skeleton Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 22/43] minikconfig: add AST Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 23/43] minikconfig: add semantic analysis Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 24/43] hw/display: make edid configurable Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 25/43] kconfig: introduce kconfig files Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 26/43] build: switch to Kconfig Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 27/43] ide: express dependencies with Kconfig Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 28/43] hw/pci/Makefile.objs: make pcie configurable Yang Zhong
2019-01-18 16:33 ` Michael S. Tsirkin
2019-01-18 17:28 ` Paolo Bonzini
2019-01-18 19:28 ` Michael S. Tsirkin
2019-01-21 10:25 ` Paolo Bonzini
2019-01-21 11:26 ` Yang Zhong
2019-01-21 11:54 ` Paolo Bonzini
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 29/43] build: convert pci.mak to Kconfig Yang Zhong
2019-01-18 16:36 ` Michael S. Tsirkin [this message]
2019-01-18 17:03 ` Paolo Bonzini
2019-01-18 19:21 ` Michael S. Tsirkin
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 30/43] build: convert sound.mak " Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 31/43] build: convert usb.mak " Yang Zhong
2019-01-18 11:23 ` [Qemu-devel] [RFC PATCH v3 32/43] scsi: express dependencies with Kconfig Yang Zhong
2019-01-18 11:24 ` [Qemu-devel] [RFC PATCH v3 33/43] bluetooth: " Yang Zhong
2019-01-18 11:24 ` [Qemu-devel] [RFC PATCH v3 34/43] isa: express dependencies with kconfig Yang Zhong
2019-01-18 11:24 ` [Qemu-devel] [RFC PATCH v3 35/43] i386: express dependencies with Kconfig Yang Zhong
2019-01-18 11:24 ` [Qemu-devel] [RFC PATCH v3 36/43] i2c: " Yang Zhong
2019-01-18 11:24 ` [Qemu-devel] [RFC PATCH v3 37/43] ptimer: " Yang Zhong
2019-01-18 11:24 ` [Qemu-devel] [RFC PATCH v3 38/43] edid: express dependencies with kconfig Yang Zhong
2019-01-18 11:24 ` [Qemu-devel] [RFC PATCH v3 39/43] hyperv: " Yang Zhong
2019-01-18 11:24 ` [Qemu-devel] [RFC PATCH v3 40/43] virtio: make virtio dependencies with Kconfig Yang Zhong
2019-01-18 11:24 ` [Qemu-devel] [RFC PATCH v3 41/43] i386-softmmu.mak: remove all CONFIG_* except boards definitions Yang Zhong
2019-01-18 15:28 ` Paolo Bonzini
2019-01-18 15:37 ` Thomas Huth
2019-01-18 11:24 ` [Qemu-devel] [RFC PATCH v3 42/43] minikconf: implement allyesconfig, allnoconfig, randconfig, defconfig Yang Zhong
2019-01-18 11:24 ` [Qemu-devel] [RFC PATCH v3 43/43] Makefile: only support defconfig Yang Zhong
2019-01-18 16:30 ` [Qemu-devel] [RFC PATCH v3 00/43] Support Kconfig in QEMU Michael S. Tsirkin
2019-01-18 16:36 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190118113317-mutt-send-email-mst@kernel.org \
--to=mst@redhat.com \
--cc=ehabkost@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=sameo@linux.intel.com \
--cc=thuth@redhat.com \
--cc=yang.zhong@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.