[U-Boot] [PATCH v3 2/7] dfu: Make DFU support more SPL friendly

[Lukasz Majewski <lukma@denx.de>]

On Thu, 17 Jan 2019 13:43:03 -0600
"Andrew F. Davis" <afd@ti.com> wrote:

> Do this by using $(SPL_) in Makefiles and CONFIG_IS_ENABLED in C code.
> This ensures the files and features are only built into the right
> build for which they are enabled. Using the macros to simplify this
> patch was made possible by the config symbol rename done in the last
> patch.

Acked-by: Lukasz Majewski <lukma@denx.de>

> 
> Signed-off-by: Andrew F. Davis <afd@ti.com>
> Reviewed-by: Tom Rini <trini@konsulko.com>
> ---
>  drivers/Makefile     |  3 +--
>  drivers/dfu/Makefile | 12 ++++++------
>  include/dfu.h        | 10 +++++-----
>  3 files changed, 12 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/Makefile b/drivers/Makefile
> index 14543c7d6c..eca023ac04 100644
> --- a/drivers/Makefile
> +++ b/drivers/Makefile
> @@ -2,6 +2,7 @@
>  
>  obj-$(CONFIG_$(SPL_TPL_)CLK) += clk/
>  obj-$(CONFIG_$(SPL_TPL_)DM) += core/
> +obj-$(CONFIG_$(SPL_TPL_)DFU) += dfu/
>  obj-$(CONFIG_$(SPL_TPL_)GPIO_SUPPORT) += gpio/
>  obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC_SUPPORT) += misc/ sysreset/
> firmware/ obj-$(CONFIG_$(SPL_TPL_)I2C_SUPPORT) += i2c/
> @@ -50,7 +51,6 @@ obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
>  obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/
>  obj-$(CONFIG_SPL_USB_GADGET) += usb/common/
>  obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/udc/
> -obj-$(CONFIG_SPL_DFU) += dfu/
>  obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
>  obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
>  obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
> @@ -86,7 +86,6 @@ obj-y += misc/
>  obj-$(CONFIG_MMC) += mmc/
>  obj-$(CONFIG_NVME) += nvme/
>  obj-y += pcmcia/
> -obj-y += dfu/
>  obj-$(CONFIG_X86) += pch/
>  obj-y += phy/allwinner/
>  obj-y += phy/marvell/
> diff --git a/drivers/dfu/Makefile b/drivers/dfu/Makefile
> index 56f9b0c5f4..4164f342ac 100644
> --- a/drivers/dfu/Makefile
> +++ b/drivers/dfu/Makefile
> @@ -3,9 +3,9 @@
>  # Copyright (C) 2012 Samsung Electronics
>  # Lukasz Majewski <l.majewski@samsung.com>
>  
> -obj-$(CONFIG_DFU) += dfu.o
> -obj-$(CONFIG_DFU_MMC) += dfu_mmc.o
> -obj-$(CONFIG_DFU_NAND) += dfu_nand.o
> -obj-$(CONFIG_DFU_RAM) += dfu_ram.o
> -obj-$(CONFIG_DFU_SF) += dfu_sf.o
> -obj-$(CONFIG_DFU_TFTP) += dfu_tftp.o
> +obj-$(CONFIG_$(SPL_)DFU) += dfu.o
> +obj-$(CONFIG_$(SPL_)DFU_MMC) += dfu_mmc.o
> +obj-$(CONFIG_$(SPL_)DFU_NAND) += dfu_nand.o
> +obj-$(CONFIG_$(SPL_)DFU_RAM) += dfu_ram.o
> +obj-$(CONFIG_$(SPL_)DFU_SF) += dfu_sf.o
> +obj-$(CONFIG_$(SPL_)DFU_TFTP) += dfu_tftp.o
> diff --git a/include/dfu.h b/include/dfu.h
> index fbe978abdc..9340a900a2 100644
> --- a/include/dfu.h
> +++ b/include/dfu.h
> @@ -202,7 +202,7 @@ static inline void dfu_set_defer_flush(struct
> dfu_entity *dfu) int dfu_write_from_mem_addr(struct dfu_entity *dfu,
> void *buf, int size); 
>  /* Device specific */
> -#ifdef CONFIG_DFU_MMC
> +#if CONFIG_IS_ENABLED(DFU_MMC)
>  extern int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *devstr,
> char *s); #else
>  static inline int dfu_fill_entity_mmc(struct dfu_entity *dfu, char
> *devstr, @@ -213,7 +213,7 @@ static inline int
> dfu_fill_entity_mmc(struct dfu_entity *dfu, char *devstr, }
>  #endif
>  
> -#ifdef CONFIG_DFU_NAND
> +#if CONFIG_IS_ENABLED(DFU_NAND)
>  extern int dfu_fill_entity_nand(struct dfu_entity *dfu, char
> *devstr, char *s); #else
>  static inline int dfu_fill_entity_nand(struct dfu_entity *dfu, char
> *devstr, @@ -224,7 +224,7 @@ static inline int
> dfu_fill_entity_nand(struct dfu_entity *dfu, char *devstr, }
>  #endif
>  
> -#ifdef CONFIG_DFU_RAM
> +#if CONFIG_IS_ENABLED(DFU_RAM)
>  extern int dfu_fill_entity_ram(struct dfu_entity *dfu, char *devstr,
> char *s); #else
>  static inline int dfu_fill_entity_ram(struct dfu_entity *dfu, char
> *devstr, @@ -235,7 +235,7 @@ static inline int
> dfu_fill_entity_ram(struct dfu_entity *dfu, char *devstr, }
>  #endif
>  
> -#ifdef CONFIG_DFU_SF
> +#if CONFIG_IS_ENABLED(DFU_SF)
>  extern int dfu_fill_entity_sf(struct dfu_entity *dfu, char *devstr,
> char *s); #else
>  static inline int dfu_fill_entity_sf(struct dfu_entity *dfu, char
> *devstr, @@ -259,7 +259,7 @@ static inline int
> dfu_fill_entity_sf(struct dfu_entity *dfu, char *devstr, *
>   * @return 0 on success, otherwise error code
>   */
> -#ifdef CONFIG_DFU_TFTP
> +#if CONFIG_IS_ENABLED(DFU_TFTP)
>  int dfu_tftp_write(char *dfu_entity_name, unsigned int addr,
> unsigned int len, char *interface, char *devstring);
>  #else




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190122/c37589f8/attachment.sig>