All of lore.kernel.org
 help / color / mirror / Atom feed
From: Martin Kepplinger <martink@posteo.de>
To: devicetree@vger.kernel.org, linux-input@vger.kernel.org
Cc: dmitry.torokhov@gmail.com, robh+dt@kernel.org,
	mark.rutland@arm.com, chinyeow.sim.xt@renesas.com,
	linux-kernel@vger.kernel.org,
	Martin Kepplinger <martin.kepplinger@ginzinger.com>
Subject: [PATCH 2/2] Input: st1232 - add support for st1633
Date: Wed, 23 Jan 2019 08:26:51 +0100	[thread overview]
Message-ID: <20190123072651.31791-2-martink@posteo.de> (raw)
In-Reply-To: <20190123072651.31791-1-martink@posteo.de>

From: Martin Kepplinger <martin.kepplinger@ginzinger.com>

Add support for the Sitronix ST1633 touchscreen controller to the st1232
driver.

Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
---
 drivers/input/touchscreen/Kconfig  |   6 +-
 drivers/input/touchscreen/st1232.c | 130 +++++++++++++++++++++--------
 2 files changed, 98 insertions(+), 38 deletions(-)

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 068dbbc610fc..7c597a49c265 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -1168,11 +1168,11 @@ config TOUCHSCREEN_SIS_I2C
 	  module will be called sis_i2c.
 
 config TOUCHSCREEN_ST1232
-	tristate "Sitronix ST1232 touchscreen controllers"
+	tristate "Sitronix ST1232 or ST1633 touchscreen controllers"
 	depends on I2C
 	help
-	  Say Y here if you want to support Sitronix ST1232
-	  touchscreen controller.
+	  Say Y here if you want to support the Sitronix ST1232
+	  or ST1633 touchscreen controller.
 
 	  If unsure, say N.
 
diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c
index 11ff32c68025..dc0288f37fda 100644
--- a/drivers/input/touchscreen/st1232.c
+++ b/drivers/input/touchscreen/st1232.c
@@ -18,18 +18,21 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_gpio.h>
+#include <linux/of_device.h>
 #include <linux/pm_qos.h>
 #include <linux/slab.h>
 #include <linux/types.h>
 
 #define ST1232_TS_NAME	"st1232-ts"
+#define ST1633_TS_NAME	"st1633-ts"
+
+enum {
+	st1232,
+	st1633,
+};
 
 #define MIN_X		0x00
 #define MIN_Y		0x00
-#define MAX_X		0x31f	/* (800 - 1) */
-#define MAX_Y		0x1df	/* (480 - 1) */
-#define MAX_AREA	0xff
-#define MAX_FINGERS	2
 
 struct st1232_ts_finger {
 	u16 x;
@@ -38,12 +41,24 @@ struct st1232_ts_finger {
 	bool is_valid;
 };
 
+struct st_chip_info {
+	u8	id;
+	u16	max_x;
+	u16	max_y;
+	u16	max_area;
+	u16	max_fingers;
+	u8	start_reg;
+};
+
 struct st1232_ts_data {
 	struct i2c_client *client;
 	struct input_dev *input_dev;
-	struct st1232_ts_finger finger[MAX_FINGERS];
 	struct dev_pm_qos_request low_latency_req;
 	int reset_gpio;
+	const struct st_chip_info *chip_info;
+	int read_buf_len;
+	u8 *read_buf;
+	struct st1232_ts_finger *finger;
 };
 
 static int st1232_ts_read_data(struct st1232_ts_data *ts)
@@ -52,40 +67,35 @@ static int st1232_ts_read_data(struct st1232_ts_data *ts)
 	struct i2c_client *client = ts->client;
 	struct i2c_msg msg[2];
 	int error;
-	u8 start_reg;
-	u8 buf[10];
+	int i, y;
+	u8 start_reg = ts->chip_info->start_reg;
+	u8 *buf = ts->read_buf;
 
-	/* read touchscreen data from ST1232 */
+	/* read touchscreen data */
 	msg[0].addr = client->addr;
 	msg[0].flags = 0;
 	msg[0].len = 1;
 	msg[0].buf = &start_reg;
-	start_reg = 0x10;
 
 	msg[1].addr = ts->client->addr;
 	msg[1].flags = I2C_M_RD;
-	msg[1].len = sizeof(buf);
+	msg[1].len = ts->read_buf_len;
 	msg[1].buf = buf;
 
 	error = i2c_transfer(client->adapter, msg, 2);
 	if (error < 0)
 		return error;
 
-	/* get "valid" bits */
-	finger[0].is_valid = buf[2] >> 7;
-	finger[1].is_valid = buf[5] >> 7;
+	for (i = 0, y = 0; i < ts->chip_info->max_fingers; i++, y += 3) {
+		finger[i].is_valid = buf[i + y] >> 7;
+		if (finger[i].is_valid) {
+			finger[i].x = ((buf[i + y] & 0x0070) << 4) | buf[i + 1];
+			finger[i].y = ((buf[i + y] & 0x0007) << 8) | buf[i + 2];
 
-	/* get xy coordinate */
-	if (finger[0].is_valid) {
-		finger[0].x = ((buf[2] & 0x0070) << 4) | buf[3];
-		finger[0].y = ((buf[2] & 0x0007) << 8) | buf[4];
-		finger[0].t = buf[8];
-	}
-
-	if (finger[1].is_valid) {
-		finger[1].x = ((buf[5] & 0x0070) << 4) | buf[6];
-		finger[1].y = ((buf[5] & 0x0007) << 8) | buf[7];
-		finger[1].t = buf[9];
+			/* st1232 includes a z-axis / touch strength */
+			if (ts->chip_info->id == st1232)
+				finger[i].t = buf[i + 6];
+		}
 	}
 
 	return 0;
@@ -104,11 +114,14 @@ static irqreturn_t st1232_ts_irq_handler(int irq, void *dev_id)
 		goto end;
 
 	/* multi touch protocol */
-	for (i = 0; i < MAX_FINGERS; i++) {
+	for (i = 0; i < ts->chip_info->max_fingers; i++) {
 		if (!finger[i].is_valid)
 			continue;
 
-		input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, finger[i].t);
+		if (ts->chip_info->id == st1232)
+			input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR,
+					 finger[i].t);
+
 		input_report_abs(input_dev, ABS_MT_POSITION_X, finger[i].x);
 		input_report_abs(input_dev, ABS_MT_POSITION_Y, finger[i].y);
 		input_mt_sync(input_dev);
@@ -142,12 +155,46 @@ static void st1232_ts_power(struct st1232_ts_data *ts, bool poweron)
 		gpio_direction_output(ts->reset_gpio, poweron);
 }
 
+static const struct st_chip_info st_chip_info_table[] = {
+	[st1232] = {
+		.id = st1232,
+		.max_x = 0x31f, /* 800 - 1 */
+		.max_y = 0x1df, /* 480 -1 */
+		.max_area = 0xff,
+		.max_fingers = 2,
+		.start_reg = 0x12,
+	},
+	[st1633] = {
+		.id = st1633,
+		.max_x = 0x13f, /* 320 - 1 */
+		.max_y = 0x1df, /* 480 -1 */
+		.max_area = 0x00,
+		.max_fingers = 5,
+		.start_reg = 0x12,
+	},
+};
+
+static const struct of_device_id st1232_ts_dt_ids[] = {
+	{ .compatible = "sitronix,st1232", .data = &st_chip_info_table[st1232] },
+	{ .compatible = "sitronix,st1633", .data = &st_chip_info_table[st1633] },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, st1232_ts_dt_ids);
+
 static int st1232_ts_probe(struct i2c_client *client,
 			   const struct i2c_device_id *id)
 {
 	struct st1232_ts_data *ts;
+	struct st1232_ts_finger *finger;
 	struct input_dev *input_dev;
 	int error;
+	const struct of_device_id *match;
+
+	match = of_match_device(st1232_ts_dt_ids, &client->dev);
+	if (!match) {
+		dev_err(&client->dev, "unknown device model\n");
+		return -ENODEV;
+	}
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
 		dev_err(&client->dev, "need I2C_FUNC_I2C\n");
@@ -163,6 +210,19 @@ static int st1232_ts_probe(struct i2c_client *client,
 	if (!ts)
 		return -ENOMEM;
 
+	ts->chip_info = match->data;
+	ts->finger = devm_kzalloc(&client->dev,
+				  sizeof(*finger) * ts->chip_info->max_fingers,
+				  GFP_KERNEL);
+	if (!ts->finger)
+		return -ENOMEM;
+
+	/* allocate a buffer according to the number of registers to read */
+	ts->read_buf_len = ts->chip_info->max_fingers * 4;
+	ts->read_buf = devm_kzalloc(&client->dev, ts->read_buf_len, GFP_KERNEL);
+	if (!ts->read_buf)
+		return -ENOMEM;
+
 	input_dev = devm_input_allocate_device(&client->dev);
 	if (!input_dev)
 		return -ENOMEM;
@@ -192,9 +252,14 @@ static int st1232_ts_probe(struct i2c_client *client,
 	__set_bit(EV_KEY, input_dev->evbit);
 	__set_bit(EV_ABS, input_dev->evbit);
 
-	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0);
-	input_set_abs_params(input_dev, ABS_MT_POSITION_X, MIN_X, MAX_X, 0, 0);
-	input_set_abs_params(input_dev, ABS_MT_POSITION_Y, MIN_Y, MAX_Y, 0, 0);
+	if (ts->chip_info->id == st1232)
+		input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0,
+				     ts->chip_info->max_area, 0, 0);
+
+	input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+			     MIN_X, ts->chip_info->max_x, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+			     MIN_Y, ts->chip_info->max_y, 0, 0);
 
 	error = devm_request_threaded_irq(&client->dev, client->irq,
 					  NULL, st1232_ts_irq_handler,
@@ -262,16 +327,11 @@ static SIMPLE_DEV_PM_OPS(st1232_ts_pm_ops,
 
 static const struct i2c_device_id st1232_ts_id[] = {
 	{ ST1232_TS_NAME, 0 },
+	{ ST1633_TS_NAME, 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, st1232_ts_id);
 
-static const struct of_device_id st1232_ts_dt_ids[] = {
-	{ .compatible = "sitronix,st1232", },
-	{ }
-};
-MODULE_DEVICE_TABLE(of, st1232_ts_dt_ids);
-
 static struct i2c_driver st1232_ts_driver = {
 	.probe		= st1232_ts_probe,
 	.remove		= st1232_ts_remove,
-- 
2.20.1

  reply	other threads:[~2019-01-23  7:26 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-23  7:26 [PATCH 1/2] dt-bindings: input: sitronix-st1232: add compatible string for ST1633 Martin Kepplinger
2019-01-23  7:26 ` Martin Kepplinger [this message]
2019-01-23 10:07   ` [PATCH 2/2] Input: st1232 - add support for st1633 Martin Kepplinger
2019-01-23 10:07     ` Martin Kepplinger
2019-01-24  8:48     ` Dmitry Torokhov
2019-01-24  8:48   ` Dmitry Torokhov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190123072651.31791-2-martink@posteo.de \
    --to=martink@posteo.de \
    --cc=chinyeow.sim.xt@renesas.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=martin.kepplinger@ginzinger.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.