[PATCH V10 1/4] dt-bindings: mmc: Add supports-cqe property

[PATCH V10 1/4] dt-bindings: mmc: Add supports-cqe property

[Sowjanya Komatineni]

Add supports-cqe optional property for MMC hosts.

This property is used to identify the specific host controller
supporting command queue.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 [V10]: This patch version moves supports-cqe property from vendor
	specific MMC property to common MMC property.

 Documentation/devicetree/bindings/mmc/mmc.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index f5a0923b34ca..cdbcfd3a4ff2 100644
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -62,6 +62,8 @@ Optional properties:
   be referred to mmc-pwrseq-simple.txt. But now it's reused as a tunable delay
   waiting for I/O signalling and card power supply to be stable, regardless of
   whether pwrseq-simple is used. Default to 10ms if no available.
+- supports-cqe : The presence of this property indicates that the corresponding
+  MMC host controller supports HW command queue feature.
 
 *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line
 polarity properties, we have to fix the meaning of the "normal" and "inverted"
-- 
2.7.4

[PATCH V10 1/4] dt-bindings: mmc: Add supports-cqe property

[Sowjanya Komatineni]

Add supports-cqe optional property for MMC hosts.

This property is used to identify the specific host controller
supporting command queue.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 [V10]: This patch version moves supports-cqe property from vendor
	specific MMC property to common MMC property.

 Documentation/devicetree/bindings/mmc/mmc.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index f5a0923b34ca..cdbcfd3a4ff2 100644
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -62,6 +62,8 @@ Optional properties:
   be referred to mmc-pwrseq-simple.txt. But now it's reused as a tunable delay
   waiting for I/O signalling and card power supply to be stable, regardless of
   whether pwrseq-simple is used. Default to 10ms if no available.
+- supports-cqe : The presence of this property indicates that the corresponding
+  MMC host controller supports HW command queue feature.
 
 *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line
 polarity properties, we have to fix the meaning of the "normal" and "inverted"
-- 
2.7.4

[PATCH V10 2/4] arm64: dts: tegra: Add CQE Support for SDMMC4

[Sowjanya Komatineni]

Add CQE Support for Tegra186 and Tegra194 SDMMC4 controller

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 arch/arm64/boot/dts/nvidia/tegra186.dtsi | 1 +
 arch/arm64/boot/dts/nvidia/tegra194.dtsi | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 22815db4a3ed..3dfdc4701934 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -319,6 +319,7 @@
 		nvidia,default-trim = <0x9>;
 		nvidia,dqs-trim = <63>;
 		mmc-hs400-1_8v;
+		supports-cqe;
 		status = "disabled";
 	};
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 6dfa1ca0b851..9ce1c91d4596 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -325,6 +325,7 @@
 			clock-names = "sdhci";
 			resets = <&bpmp TEGRA194_RESET_SDMMC4>;
 			reset-names = "sdhci";
+			supports-cqe;
 			status = "disabled";
 		};
 
-- 
2.7.4

[PATCH V10 2/4] arm64: dts: tegra: Add CQE Support for SDMMC4

[Sowjanya Komatineni]

Add CQE Support for Tegra186 and Tegra194 SDMMC4 controller

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 arch/arm64/boot/dts/nvidia/tegra186.dtsi | 1 +
 arch/arm64/boot/dts/nvidia/tegra194.dtsi | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 22815db4a3ed..3dfdc4701934 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -319,6 +319,7 @@
 		nvidia,default-trim = <0x9>;
 		nvidia,dqs-trim = <63>;
 		mmc-hs400-1_8v;
+		supports-cqe;
 		status = "disabled";
 	};
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 6dfa1ca0b851..9ce1c91d4596 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -325,6 +325,7 @@
 			clock-names = "sdhci";
 			resets = <&bpmp TEGRA194_RESET_SDMMC4>;
 			reset-names = "sdhci";
+			supports-cqe;
 			status = "disabled";
 		};
 
-- 
2.7.4

[PATCH V10 3/4] mmc: sdhci: Add ADMA3 DMA support for V4 enabled host

[Sowjanya Komatineni]

Below are the supported DMA types in Host Control1 Register
with Version 4 enable
b'00 - SDMA
b'01 - Not Used
b'10 - ADMA2
b'11 - ADMA2 or ADMA3

ADMA3 uses Command Descriptor to issue an SD command.
A multi-block data transfer is performed by using a pair of CMD
descriptor and ADMA2 descriptor.

ADMA3 performs multiple of multi-block data transfer by using
Integrated Descriptor which is more suitable for Command Queuing
to fetch both Command and Transfer descriptors.

Host Capabilities register indiactes the supports of ADMA3 DMA.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 [V10]: Changes are same as V9 except this series has SDHCI core changes
	into seperate patch 

 drivers/mmc/host/sdhci.c | 9 ++++++++-
 drivers/mmc/host/sdhci.h | 2 ++
 2 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index a22e11a65658..c6afe793399e 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -3353,7 +3353,14 @@ void sdhci_cqe_enable(struct mmc_host *mmc)
 
 	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
 	ctrl &= ~SDHCI_CTRL_DMA_MASK;
-	if (host->flags & SDHCI_USE_64_BIT_DMA)
+	/*
+	 * Host from V4.10 supports ADMA3 DMA type.
+	 * ADMA3 performs integrated descriptor which is more suitable
+	 * for cmd queuing to fetch both command and transfer descriptors.
+	 */
+	if (host->v4_mode && (host->caps1 & SDHCI_CAN_DO_ADMA3))
+		ctrl |= SDHCI_CTRL_ADMA3;
+	else if (host->flags & SDHCI_USE_64_BIT_DMA)
 		ctrl |= SDHCI_CTRL_ADMA64;
 	else
 		ctrl |= SDHCI_CTRL_ADMA32;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 6cc9a3c2ac66..4070be49d947 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -88,6 +88,7 @@
 #define   SDHCI_CTRL_ADMA1	0x08
 #define   SDHCI_CTRL_ADMA32	0x10
 #define   SDHCI_CTRL_ADMA64	0x18
+#define   SDHCI_CTRL_ADMA3	0x18
 #define   SDHCI_CTRL_8BITBUS	0x20
 #define  SDHCI_CTRL_CDTEST_INS	0x40
 #define  SDHCI_CTRL_CDTEST_EN	0x80
@@ -230,6 +231,7 @@
 #define  SDHCI_RETUNING_MODE_SHIFT		14
 #define  SDHCI_CLOCK_MUL_MASK	0x00FF0000
 #define  SDHCI_CLOCK_MUL_SHIFT	16
+#define  SDHCI_CAN_DO_ADMA3	0x08000000
 #define  SDHCI_SUPPORT_HS400	0x80000000 /* Non-standard */
 
 #define SDHCI_CAPABILITIES_1	0x44
-- 
2.7.4

[PATCH V10 3/4] mmc: sdhci: Add ADMA3 DMA support for V4 enabled host

[Sowjanya Komatineni]

Below are the supported DMA types in Host Control1 Register
with Version 4 enable
b'00 - SDMA
b'01 - Not Used
b'10 - ADMA2
b'11 - ADMA2 or ADMA3

ADMA3 uses Command Descriptor to issue an SD command.
A multi-block data transfer is performed by using a pair of CMD
descriptor and ADMA2 descriptor.

ADMA3 performs multiple of multi-block data transfer by using
Integrated Descriptor which is more suitable for Command Queuing
to fetch both Command and Transfer descriptors.

Host Capabilities register indiactes the supports of ADMA3 DMA.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 [V10]: Changes are same as V9 except this series has SDHCI core changes
	into seperate patch 

 drivers/mmc/host/sdhci.c | 9 ++++++++-
 drivers/mmc/host/sdhci.h | 2 ++
 2 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index a22e11a65658..c6afe793399e 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -3353,7 +3353,14 @@ void sdhci_cqe_enable(struct mmc_host *mmc)
 
 	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
 	ctrl &= ~SDHCI_CTRL_DMA_MASK;
-	if (host->flags & SDHCI_USE_64_BIT_DMA)
+	/*
+	 * Host from V4.10 supports ADMA3 DMA type.
+	 * ADMA3 performs integrated descriptor which is more suitable
+	 * for cmd queuing to fetch both command and transfer descriptors.
+	 */
+	if (host->v4_mode && (host->caps1 & SDHCI_CAN_DO_ADMA3))
+		ctrl |= SDHCI_CTRL_ADMA3;
+	else if (host->flags & SDHCI_USE_64_BIT_DMA)
 		ctrl |= SDHCI_CTRL_ADMA64;
 	else
 		ctrl |= SDHCI_CTRL_ADMA32;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 6cc9a3c2ac66..4070be49d947 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -88,6 +88,7 @@
 #define   SDHCI_CTRL_ADMA1	0x08
 #define   SDHCI_CTRL_ADMA32	0x10
 #define   SDHCI_CTRL_ADMA64	0x18
+#define   SDHCI_CTRL_ADMA3	0x18
 #define   SDHCI_CTRL_8BITBUS	0x20
 #define  SDHCI_CTRL_CDTEST_INS	0x40
 #define  SDHCI_CTRL_CDTEST_EN	0x80
@@ -230,6 +231,7 @@
 #define  SDHCI_RETUNING_MODE_SHIFT		14
 #define  SDHCI_CLOCK_MUL_MASK	0x00FF0000
 #define  SDHCI_CLOCK_MUL_SHIFT	16
+#define  SDHCI_CAN_DO_ADMA3	0x08000000
 #define  SDHCI_SUPPORT_HS400	0x80000000 /* Non-standard */
 
 #define SDHCI_CAPABILITIES_1	0x44
-- 
2.7.4

Re: [PATCH V10 3/4] mmc: sdhci: Add ADMA3 DMA support for V4 enabled host

[Adrian Hunter]

On 22/01/19 9:56 PM, Sowjanya Komatineni wrote:
> Below are the supported DMA types in Host Control1 Register
> with Version 4 enable
> b'00 - SDMA
> b'01 - Not Used
> b'10 - ADMA2
> b'11 - ADMA2 or ADMA3
> 
> ADMA3 uses Command Descriptor to issue an SD command.
> A multi-block data transfer is performed by using a pair of CMD
> descriptor and ADMA2 descriptor.
> 
> ADMA3 performs multiple of multi-block data transfer by using
> Integrated Descriptor which is more suitable for Command Queuing
> to fetch both Command and Transfer descriptors.
> 
> Host Capabilities register indiactes the supports of ADMA3 DMA.

indiactes -> indicates

> 
> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>

Acked-by: Adrian Hunter <adrian.hunter@intel.com>

> ---
>  [V10]: Changes are same as V9 except this series has SDHCI core changes
> 	into seperate patch 
> 
>  drivers/mmc/host/sdhci.c | 9 ++++++++-
>  drivers/mmc/host/sdhci.h | 2 ++
>  2 files changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index a22e11a65658..c6afe793399e 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -3353,7 +3353,14 @@ void sdhci_cqe_enable(struct mmc_host *mmc)
>  
>  	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
>  	ctrl &= ~SDHCI_CTRL_DMA_MASK;
> -	if (host->flags & SDHCI_USE_64_BIT_DMA)
> +	/*
> +	 * Host from V4.10 supports ADMA3 DMA type.
> +	 * ADMA3 performs integrated descriptor which is more suitable
> +	 * for cmd queuing to fetch both command and transfer descriptors.
> +	 */
> +	if (host->v4_mode && (host->caps1 & SDHCI_CAN_DO_ADMA3))
> +		ctrl |= SDHCI_CTRL_ADMA3;
> +	else if (host->flags & SDHCI_USE_64_BIT_DMA)
>  		ctrl |= SDHCI_CTRL_ADMA64;
>  	else
>  		ctrl |= SDHCI_CTRL_ADMA32;
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index 6cc9a3c2ac66..4070be49d947 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -88,6 +88,7 @@
>  #define   SDHCI_CTRL_ADMA1	0x08
>  #define   SDHCI_CTRL_ADMA32	0x10
>  #define   SDHCI_CTRL_ADMA64	0x18
> +#define   SDHCI_CTRL_ADMA3	0x18
>  #define   SDHCI_CTRL_8BITBUS	0x20
>  #define  SDHCI_CTRL_CDTEST_INS	0x40
>  #define  SDHCI_CTRL_CDTEST_EN	0x80
> @@ -230,6 +231,7 @@
>  #define  SDHCI_RETUNING_MODE_SHIFT		14
>  #define  SDHCI_CLOCK_MUL_MASK	0x00FF0000
>  #define  SDHCI_CLOCK_MUL_SHIFT	16
> +#define  SDHCI_CAN_DO_ADMA3	0x08000000
>  #define  SDHCI_SUPPORT_HS400	0x80000000 /* Non-standard */
>  
>  #define SDHCI_CAPABILITIES_1	0x44
> 

Re: [PATCH V10 3/4] mmc: sdhci: Add ADMA3 DMA support for V4 enabled host

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 1019 bytes --]

On Tue, Jan 22, 2019 at 11:56:32AM -0800, Sowjanya Komatineni wrote:
> Below are the supported DMA types in Host Control1 Register
> with Version 4 enable
> b'00 - SDMA
> b'01 - Not Used
> b'10 - ADMA2
> b'11 - ADMA2 or ADMA3
> 
> ADMA3 uses Command Descriptor to issue an SD command.
> A multi-block data transfer is performed by using a pair of CMD
> descriptor and ADMA2 descriptor.
> 
> ADMA3 performs multiple of multi-block data transfer by using
> Integrated Descriptor which is more suitable for Command Queuing
> to fetch both Command and Transfer descriptors.
> 
> Host Capabilities register indiactes the supports of ADMA3 DMA.
> 
> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
> ---
>  [V10]: Changes are same as V9 except this series has SDHCI core changes
> 	into seperate patch 
> 
>  drivers/mmc/host/sdhci.c | 9 ++++++++-
>  drivers/mmc/host/sdhci.h | 2 ++
>  2 files changed, 10 insertions(+), 1 deletion(-)

Reviewed-by: Thierry Reding <treding@nvidia.com>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[PATCH V10 4/4] mmc: tegra: HW Command Queue Support for Tegra SDMMC

[Sowjanya Komatineni]

This patch adds HW Command Queue for supported Tegra SDMMC
controllers.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 [V10]: Changes are same as V9 except this series has SDHCI core changes
	into seperate patch 

 drivers/mmc/host/Kconfig       |   1 +
 drivers/mmc/host/sdhci-tegra.c | 117 +++++++++++++++++++++++++++++++++++++++--
 2 files changed, 114 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index e26b8145efb3..0739d26c001b 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -250,6 +250,7 @@ config MMC_SDHCI_TEGRA
 	depends on ARCH_TEGRA
 	depends on MMC_SDHCI_PLTFM
 	select MMC_SDHCI_IO_ACCESSORS
+	select MMC_CQHCI
 	help
 	  This selects the Tegra SD/MMC controller. If you have a Tegra
 	  platform with SD or MMC devices, say Y or M here.
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index e6ace31e2a41..d400f158bee4 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -33,6 +33,7 @@
 #include <linux/ktime.h>
 
 #include "sdhci-pltfm.h"
+#include "cqhci.h"
 
 /* Tegra SDHOST controller vendor register definitions */
 #define SDHCI_TEGRA_VENDOR_CLOCK_CTRL			0x100
@@ -89,6 +90,9 @@
 #define NVQUIRK_NEEDS_PAD_CONTROL			BIT(7)
 #define NVQUIRK_DIS_CARD_CLK_CONFIG_TAP			BIT(8)
 
+/* SDMMC CQE Base Address for Tegra Host Ver 4.1 and Higher */
+#define SDHCI_TEGRA_CQE_BASE_ADDR			0xF000
+
 struct sdhci_tegra_soc_data {
 	const struct sdhci_pltfm_data *pdata;
 	u32 nvquirks;
@@ -128,6 +132,7 @@ struct sdhci_tegra {
 	u32 default_tap;
 	u32 default_trim;
 	u32 dqs_trim;
+	bool enable_hwcq;
 };
 
 static u16 tegra_sdhci_readw(struct sdhci_host *host, int reg)
@@ -595,6 +600,20 @@ static void tegra_sdhci_parse_tap_and_trim(struct sdhci_host *host)
 		tegra_host->dqs_trim = 0x11;
 }
 
+static void tegra_sdhci_parse_dt(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
+
+	if (device_property_read_bool(host->mmc->parent, "supports-cqe"))
+		tegra_host->enable_hwcq = true;
+	else
+		tegra_host->enable_hwcq = false;
+
+	tegra_sdhci_parse_pad_autocal_dt(host);
+	tegra_sdhci_parse_tap_and_trim(host);
+}
+
 static void tegra_sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -836,6 +855,49 @@ static void tegra_sdhci_voltage_switch(struct sdhci_host *host)
 		tegra_host->pad_calib_required = true;
 }
 
+static void sdhci_tegra_cqe_enable(struct mmc_host *mmc)
+{
+	struct cqhci_host *cq_host = mmc->cqe_private;
+	u32 cqcfg = 0;
+
+	/*
+	 * Tegra SDMMC Controller design prevents write access to BLOCK_COUNT
+	 * registers when CQE is enabled.
+	 */
+	cqcfg = cqhci_readl(cq_host, CQHCI_CFG);
+	if (cqcfg & CQHCI_ENABLE)
+		cqhci_writel(cq_host, (cqcfg & ~CQHCI_ENABLE), CQHCI_CFG);
+
+	sdhci_cqe_enable(mmc);
+
+	if (cqcfg & CQHCI_ENABLE)
+		cqhci_writel(cq_host, cqcfg, CQHCI_CFG);
+}
+
+static void sdhci_tegra_dumpregs(struct mmc_host *mmc)
+{
+	sdhci_dumpregs(mmc_priv(mmc));
+}
+
+static u32 sdhci_tegra_cqhci_irq(struct sdhci_host *host, u32 intmask)
+{
+	int cmd_error = 0;
+	int data_error = 0;
+
+	if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error))
+		return intmask;
+
+	cqhci_irq(host->mmc, intmask, cmd_error, data_error);
+
+	return 0;
+}
+
+static const struct cqhci_host_ops sdhci_tegra_cqhci_ops = {
+	.enable	= sdhci_tegra_cqe_enable,
+	.disable = sdhci_cqe_disable,
+	.dumpregs = sdhci_tegra_dumpregs,
+};
+
 static const struct sdhci_ops tegra_sdhci_ops = {
 	.get_ro     = tegra_sdhci_get_ro,
 	.read_w     = tegra_sdhci_readw,
@@ -989,6 +1051,7 @@ static const struct sdhci_ops tegra186_sdhci_ops = {
 	.set_uhs_signaling = tegra_sdhci_set_uhs_signaling,
 	.voltage_switch = tegra_sdhci_voltage_switch,
 	.get_max_clock = tegra_sdhci_get_max_clock,
+	.irq = sdhci_tegra_cqhci_irq,
 };
 
 static const struct sdhci_pltfm_data sdhci_tegra186_pdata = {
@@ -1030,6 +1093,54 @@ static const struct of_device_id sdhci_tegra_dt_match[] = {
 };
 MODULE_DEVICE_TABLE(of, sdhci_tegra_dt_match);
 
+static int sdhci_tegra_add_host(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
+	struct cqhci_host *cq_host;
+	bool dma64;
+	int ret;
+
+	if (!tegra_host->enable_hwcq)
+		return sdhci_add_host(host);
+
+	sdhci_enable_v4_mode(host);
+
+	ret = sdhci_setup_host(host);
+	if (ret)
+		return ret;
+
+	host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
+
+	cq_host = devm_kzalloc(host->mmc->parent,
+				sizeof(*cq_host), GFP_KERNEL);
+	if (!cq_host) {
+		ret = -ENOMEM;
+		goto cleanup;
+	}
+
+	cq_host->mmio = host->ioaddr + SDHCI_TEGRA_CQE_BASE_ADDR;
+	cq_host->ops = &sdhci_tegra_cqhci_ops;
+
+	dma64 = host->flags & SDHCI_USE_64_BIT_DMA;
+	if (dma64)
+		cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
+
+	ret = cqhci_init(cq_host, host->mmc, dma64);
+	if (ret)
+		goto cleanup;
+
+	ret = __sdhci_add_host(host);
+	if (ret)
+		goto cleanup;
+
+	return 0;
+
+cleanup:
+	sdhci_cleanup_host(host);
+	return ret;
+}
+
 static int sdhci_tegra_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *match;
@@ -1077,9 +1188,7 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
 	if (tegra_host->soc_data->nvquirks & NVQUIRK_ENABLE_DDR50)
 		host->mmc->caps |= MMC_CAP_1_8V_DDR;
 
-	tegra_sdhci_parse_pad_autocal_dt(host);
-
-	tegra_sdhci_parse_tap_and_trim(host);
+	tegra_sdhci_parse_dt(host);
 
 	tegra_host->power_gpio = devm_gpiod_get_optional(&pdev->dev, "power",
 							 GPIOD_OUT_HIGH);
@@ -1117,7 +1226,7 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
 
 	usleep_range(2000, 4000);
 
-	rc = sdhci_add_host(host);
+	rc = sdhci_tegra_add_host(host);
 	if (rc)
 		goto err_add_host;
 
-- 
2.7.4

[PATCH V10 4/4] mmc: tegra: HW Command Queue Support for Tegra SDMMC

[Sowjanya Komatineni]

This patch adds HW Command Queue for supported Tegra SDMMC
controllers.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
 [V10]: Changes are same as V9 except this series has SDHCI core changes
	into seperate patch 

 drivers/mmc/host/Kconfig       |   1 +
 drivers/mmc/host/sdhci-tegra.c | 117 +++++++++++++++++++++++++++++++++++++++--
 2 files changed, 114 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index e26b8145efb3..0739d26c001b 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -250,6 +250,7 @@ config MMC_SDHCI_TEGRA
 	depends on ARCH_TEGRA
 	depends on MMC_SDHCI_PLTFM
 	select MMC_SDHCI_IO_ACCESSORS
+	select MMC_CQHCI
 	help
 	  This selects the Tegra SD/MMC controller. If you have a Tegra
 	  platform with SD or MMC devices, say Y or M here.
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index e6ace31e2a41..d400f158bee4 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -33,6 +33,7 @@
 #include <linux/ktime.h>
 
 #include "sdhci-pltfm.h"
+#include "cqhci.h"
 
 /* Tegra SDHOST controller vendor register definitions */
 #define SDHCI_TEGRA_VENDOR_CLOCK_CTRL			0x100
@@ -89,6 +90,9 @@
 #define NVQUIRK_NEEDS_PAD_CONTROL			BIT(7)
 #define NVQUIRK_DIS_CARD_CLK_CONFIG_TAP			BIT(8)
 
+/* SDMMC CQE Base Address for Tegra Host Ver 4.1 and Higher */
+#define SDHCI_TEGRA_CQE_BASE_ADDR			0xF000
+
 struct sdhci_tegra_soc_data {
 	const struct sdhci_pltfm_data *pdata;
 	u32 nvquirks;
@@ -128,6 +132,7 @@ struct sdhci_tegra {
 	u32 default_tap;
 	u32 default_trim;
 	u32 dqs_trim;
+	bool enable_hwcq;
 };
 
 static u16 tegra_sdhci_readw(struct sdhci_host *host, int reg)
@@ -595,6 +600,20 @@ static void tegra_sdhci_parse_tap_and_trim(struct sdhci_host *host)
 		tegra_host->dqs_trim = 0x11;
 }
 
+static void tegra_sdhci_parse_dt(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
+
+	if (device_property_read_bool(host->mmc->parent, "supports-cqe"))
+		tegra_host->enable_hwcq = true;
+	else
+		tegra_host->enable_hwcq = false;
+
+	tegra_sdhci_parse_pad_autocal_dt(host);
+	tegra_sdhci_parse_tap_and_trim(host);
+}
+
 static void tegra_sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -836,6 +855,49 @@ static void tegra_sdhci_voltage_switch(struct sdhci_host *host)
 		tegra_host->pad_calib_required = true;
 }
 
+static void sdhci_tegra_cqe_enable(struct mmc_host *mmc)
+{
+	struct cqhci_host *cq_host = mmc->cqe_private;
+	u32 cqcfg = 0;
+
+	/*
+	 * Tegra SDMMC Controller design prevents write access to BLOCK_COUNT
+	 * registers when CQE is enabled.
+	 */
+	cqcfg = cqhci_readl(cq_host, CQHCI_CFG);
+	if (cqcfg & CQHCI_ENABLE)
+		cqhci_writel(cq_host, (cqcfg & ~CQHCI_ENABLE), CQHCI_CFG);
+
+	sdhci_cqe_enable(mmc);
+
+	if (cqcfg & CQHCI_ENABLE)
+		cqhci_writel(cq_host, cqcfg, CQHCI_CFG);
+}
+
+static void sdhci_tegra_dumpregs(struct mmc_host *mmc)
+{
+	sdhci_dumpregs(mmc_priv(mmc));
+}
+
+static u32 sdhci_tegra_cqhci_irq(struct sdhci_host *host, u32 intmask)
+{
+	int cmd_error = 0;
+	int data_error = 0;
+
+	if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error))
+		return intmask;
+
+	cqhci_irq(host->mmc, intmask, cmd_error, data_error);
+
+	return 0;
+}
+
+static const struct cqhci_host_ops sdhci_tegra_cqhci_ops = {
+	.enable	= sdhci_tegra_cqe_enable,
+	.disable = sdhci_cqe_disable,
+	.dumpregs = sdhci_tegra_dumpregs,
+};
+
 static const struct sdhci_ops tegra_sdhci_ops = {
 	.get_ro     = tegra_sdhci_get_ro,
 	.read_w     = tegra_sdhci_readw,
@@ -989,6 +1051,7 @@ static const struct sdhci_ops tegra186_sdhci_ops = {
 	.set_uhs_signaling = tegra_sdhci_set_uhs_signaling,
 	.voltage_switch = tegra_sdhci_voltage_switch,
 	.get_max_clock = tegra_sdhci_get_max_clock,
+	.irq = sdhci_tegra_cqhci_irq,
 };
 
 static const struct sdhci_pltfm_data sdhci_tegra186_pdata = {
@@ -1030,6 +1093,54 @@ static const struct of_device_id sdhci_tegra_dt_match[] = {
 };
 MODULE_DEVICE_TABLE(of, sdhci_tegra_dt_match);
 
+static int sdhci_tegra_add_host(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
+	struct cqhci_host *cq_host;
+	bool dma64;
+	int ret;
+
+	if (!tegra_host->enable_hwcq)
+		return sdhci_add_host(host);
+
+	sdhci_enable_v4_mode(host);
+
+	ret = sdhci_setup_host(host);
+	if (ret)
+		return ret;
+
+	host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
+
+	cq_host = devm_kzalloc(host->mmc->parent,
+				sizeof(*cq_host), GFP_KERNEL);
+	if (!cq_host) {
+		ret = -ENOMEM;
+		goto cleanup;
+	}
+
+	cq_host->mmio = host->ioaddr + SDHCI_TEGRA_CQE_BASE_ADDR;
+	cq_host->ops = &sdhci_tegra_cqhci_ops;
+
+	dma64 = host->flags & SDHCI_USE_64_BIT_DMA;
+	if (dma64)
+		cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
+
+	ret = cqhci_init(cq_host, host->mmc, dma64);
+	if (ret)
+		goto cleanup;
+
+	ret = __sdhci_add_host(host);
+	if (ret)
+		goto cleanup;
+
+	return 0;
+
+cleanup:
+	sdhci_cleanup_host(host);
+	return ret;
+}
+
 static int sdhci_tegra_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *match;
@@ -1077,9 +1188,7 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
 	if (tegra_host->soc_data->nvquirks & NVQUIRK_ENABLE_DDR50)
 		host->mmc->caps |= MMC_CAP_1_8V_DDR;
 
-	tegra_sdhci_parse_pad_autocal_dt(host);
-
-	tegra_sdhci_parse_tap_and_trim(host);
+	tegra_sdhci_parse_dt(host);
 
 	tegra_host->power_gpio = devm_gpiod_get_optional(&pdev->dev, "power",
 							 GPIOD_OUT_HIGH);
@@ -1117,7 +1226,7 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
 
 	usleep_range(2000, 4000);
 
-	rc = sdhci_add_host(host);
+	rc = sdhci_tegra_add_host(host);
 	if (rc)
 		goto err_add_host;
 
-- 
2.7.4

Re: [PATCH V10 4/4] mmc: tegra: HW Command Queue Support for Tegra SDMMC

[Adrian Hunter]

On 22/01/19 9:56 PM, Sowjanya Komatineni wrote:
> This patch adds HW Command Queue for supported Tegra SDMMC
> controllers.
> 
> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>

Acked-by: Adrian Hunter <adrian.hunter@intel.com>

> ---
>  [V10]: Changes are same as V9 except this series has SDHCI core changes
> 	into seperate patch 
> 
>  drivers/mmc/host/Kconfig       |   1 +
>  drivers/mmc/host/sdhci-tegra.c | 117 +++++++++++++++++++++++++++++++++++++++--
>  2 files changed, 114 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index e26b8145efb3..0739d26c001b 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -250,6 +250,7 @@ config MMC_SDHCI_TEGRA
>  	depends on ARCH_TEGRA
>  	depends on MMC_SDHCI_PLTFM
>  	select MMC_SDHCI_IO_ACCESSORS
> +	select MMC_CQHCI
>  	help
>  	  This selects the Tegra SD/MMC controller. If you have a Tegra
>  	  platform with SD or MMC devices, say Y or M here.
> diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
> index e6ace31e2a41..d400f158bee4 100644
> --- a/drivers/mmc/host/sdhci-tegra.c
> +++ b/drivers/mmc/host/sdhci-tegra.c
> @@ -33,6 +33,7 @@
>  #include <linux/ktime.h>
>  
>  #include "sdhci-pltfm.h"
> +#include "cqhci.h"
>  
>  /* Tegra SDHOST controller vendor register definitions */
>  #define SDHCI_TEGRA_VENDOR_CLOCK_CTRL			0x100
> @@ -89,6 +90,9 @@
>  #define NVQUIRK_NEEDS_PAD_CONTROL			BIT(7)
>  #define NVQUIRK_DIS_CARD_CLK_CONFIG_TAP			BIT(8)
>  
> +/* SDMMC CQE Base Address for Tegra Host Ver 4.1 and Higher */
> +#define SDHCI_TEGRA_CQE_BASE_ADDR			0xF000
> +
>  struct sdhci_tegra_soc_data {
>  	const struct sdhci_pltfm_data *pdata;
>  	u32 nvquirks;
> @@ -128,6 +132,7 @@ struct sdhci_tegra {
>  	u32 default_tap;
>  	u32 default_trim;
>  	u32 dqs_trim;
> +	bool enable_hwcq;
>  };
>  
>  static u16 tegra_sdhci_readw(struct sdhci_host *host, int reg)
> @@ -595,6 +600,20 @@ static void tegra_sdhci_parse_tap_and_trim(struct sdhci_host *host)
>  		tegra_host->dqs_trim = 0x11;
>  }
>  
> +static void tegra_sdhci_parse_dt(struct sdhci_host *host)
> +{
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
> +
> +	if (device_property_read_bool(host->mmc->parent, "supports-cqe"))
> +		tegra_host->enable_hwcq = true;
> +	else
> +		tegra_host->enable_hwcq = false;
> +
> +	tegra_sdhci_parse_pad_autocal_dt(host);
> +	tegra_sdhci_parse_tap_and_trim(host);
> +}
> +
>  static void tegra_sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
>  {
>  	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> @@ -836,6 +855,49 @@ static void tegra_sdhci_voltage_switch(struct sdhci_host *host)
>  		tegra_host->pad_calib_required = true;
>  }
>  
> +static void sdhci_tegra_cqe_enable(struct mmc_host *mmc)
> +{
> +	struct cqhci_host *cq_host = mmc->cqe_private;
> +	u32 cqcfg = 0;
> +
> +	/*
> +	 * Tegra SDMMC Controller design prevents write access to BLOCK_COUNT
> +	 * registers when CQE is enabled.
> +	 */
> +	cqcfg = cqhci_readl(cq_host, CQHCI_CFG);
> +	if (cqcfg & CQHCI_ENABLE)
> +		cqhci_writel(cq_host, (cqcfg & ~CQHCI_ENABLE), CQHCI_CFG);
> +
> +	sdhci_cqe_enable(mmc);
> +
> +	if (cqcfg & CQHCI_ENABLE)
> +		cqhci_writel(cq_host, cqcfg, CQHCI_CFG);
> +}
> +
> +static void sdhci_tegra_dumpregs(struct mmc_host *mmc)
> +{
> +	sdhci_dumpregs(mmc_priv(mmc));
> +}
> +
> +static u32 sdhci_tegra_cqhci_irq(struct sdhci_host *host, u32 intmask)
> +{
> +	int cmd_error = 0;
> +	int data_error = 0;
> +
> +	if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error))
> +		return intmask;
> +
> +	cqhci_irq(host->mmc, intmask, cmd_error, data_error);
> +
> +	return 0;
> +}
> +
> +static const struct cqhci_host_ops sdhci_tegra_cqhci_ops = {
> +	.enable	= sdhci_tegra_cqe_enable,
> +	.disable = sdhci_cqe_disable,
> +	.dumpregs = sdhci_tegra_dumpregs,
> +};
> +
>  static const struct sdhci_ops tegra_sdhci_ops = {
>  	.get_ro     = tegra_sdhci_get_ro,
>  	.read_w     = tegra_sdhci_readw,
> @@ -989,6 +1051,7 @@ static const struct sdhci_ops tegra186_sdhci_ops = {
>  	.set_uhs_signaling = tegra_sdhci_set_uhs_signaling,
>  	.voltage_switch = tegra_sdhci_voltage_switch,
>  	.get_max_clock = tegra_sdhci_get_max_clock,
> +	.irq = sdhci_tegra_cqhci_irq,
>  };
>  
>  static const struct sdhci_pltfm_data sdhci_tegra186_pdata = {
> @@ -1030,6 +1093,54 @@ static const struct of_device_id sdhci_tegra_dt_match[] = {
>  };
>  MODULE_DEVICE_TABLE(of, sdhci_tegra_dt_match);
>  
> +static int sdhci_tegra_add_host(struct sdhci_host *host)
> +{
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
> +	struct cqhci_host *cq_host;
> +	bool dma64;
> +	int ret;
> +
> +	if (!tegra_host->enable_hwcq)
> +		return sdhci_add_host(host);
> +
> +	sdhci_enable_v4_mode(host);
> +
> +	ret = sdhci_setup_host(host);
> +	if (ret)
> +		return ret;
> +
> +	host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
> +
> +	cq_host = devm_kzalloc(host->mmc->parent,
> +				sizeof(*cq_host), GFP_KERNEL);
> +	if (!cq_host) {
> +		ret = -ENOMEM;
> +		goto cleanup;
> +	}
> +
> +	cq_host->mmio = host->ioaddr + SDHCI_TEGRA_CQE_BASE_ADDR;
> +	cq_host->ops = &sdhci_tegra_cqhci_ops;
> +
> +	dma64 = host->flags & SDHCI_USE_64_BIT_DMA;
> +	if (dma64)
> +		cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
> +
> +	ret = cqhci_init(cq_host, host->mmc, dma64);
> +	if (ret)
> +		goto cleanup;
> +
> +	ret = __sdhci_add_host(host);
> +	if (ret)
> +		goto cleanup;
> +
> +	return 0;
> +
> +cleanup:
> +	sdhci_cleanup_host(host);
> +	return ret;
> +}
> +
>  static int sdhci_tegra_probe(struct platform_device *pdev)
>  {
>  	const struct of_device_id *match;
> @@ -1077,9 +1188,7 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
>  	if (tegra_host->soc_data->nvquirks & NVQUIRK_ENABLE_DDR50)
>  		host->mmc->caps |= MMC_CAP_1_8V_DDR;
>  
> -	tegra_sdhci_parse_pad_autocal_dt(host);
> -
> -	tegra_sdhci_parse_tap_and_trim(host);
> +	tegra_sdhci_parse_dt(host);
>  
>  	tegra_host->power_gpio = devm_gpiod_get_optional(&pdev->dev, "power",
>  							 GPIOD_OUT_HIGH);
> @@ -1117,7 +1226,7 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
>  
>  	usleep_range(2000, 4000);
>  
> -	rc = sdhci_add_host(host);
> +	rc = sdhci_tegra_add_host(host);
>  	if (rc)
>  		goto err_add_host;
>  
> 

Re: [PATCH V10 4/4] mmc: tegra: HW Command Queue Support for Tegra SDMMC

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 1039 bytes --]

On Tue, Jan 22, 2019 at 11:56:33AM -0800, Sowjanya Komatineni wrote:
> This patch adds HW Command Queue for supported Tegra SDMMC
> controllers.
> 
> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
> ---
>  [V10]: Changes are same as V9 except this series has SDHCI core changes
> 	into seperate patch 
> 
>  drivers/mmc/host/Kconfig       |   1 +
>  drivers/mmc/host/sdhci-tegra.c | 117 +++++++++++++++++++++++++++++++++++++++--
>  2 files changed, 114 insertions(+), 4 deletions(-)

Sowjanya,

it's good practice to collect the various tags that you've received on
patches when resending. I had already acked patches 1 and 3 of v9, so
you should've added the Acked-by for at least this patch 4/4 because it
is unchanged from v9. The Acked-by on patch 1 was also valid because you
only moved the documentation, but it is otherwise unchanged.

No worries, though, just something to keep in mind when you send v11
with the typofix that Adrian pointed out.

Acked-by: Thierry Reding <treding@nvidia.com>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH V10 1/4] dt-bindings: mmc: Add supports-cqe property

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 565 bytes --]

On Tue, Jan 22, 2019 at 11:56:30AM -0800, Sowjanya Komatineni wrote:
> Add supports-cqe optional property for MMC hosts.
> 
> This property is used to identify the specific host controller
> supporting command queue.
> 
> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
> ---
>  [V10]: This patch version moves supports-cqe property from vendor
> 	specific MMC property to common MMC property.
> 
>  Documentation/devicetree/bindings/mmc/mmc.txt | 2 ++
>  1 file changed, 2 insertions(+)

Reviewed-by: Thierry Reding <treding@nvidia.com>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]