All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Darrick J. Wong" <darrick.wong@oracle.com>
To: Brian Foster <bfoster@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>, linux-xfs@vger.kernel.org
Subject: Re: [PATCH RFC] xfs: support magic value in xfs_buf_ops
Date: Sun, 27 Jan 2019 09:49:49 -0800	[thread overview]
Message-ID: <20190127174949.GD4368@magnolia> (raw)
In-Reply-To: <20190125144324.GA58775@bfoster>

On Fri, Jan 25, 2019 at 09:43:25AM -0500, Brian Foster wrote:
> On Fri, Jan 25, 2019 at 09:19:17AM +1100, Dave Chinner wrote:
> > On Thu, Jan 24, 2019 at 11:08:46AM -0800, Darrick J. Wong wrote:
> > > On Thu, Jan 24, 2019 at 10:54:40AM -0500, Brian Foster wrote:
> > > > Add a field to specify the v4 and v5 magic values in xfs_buf_ops.
> > > > This allows otherwise identical verifiers to distinguish between
> > > > and verify different magic values (inobt vs. finobt buffers). This
> > > > also facilitates verification of the appropriate magic value based
> > > > on superblock version.
> > > > 
> > > > The magic field is optional and is free to be used as appropriate
> > > > for each particular verifier.
> > > > 
> > > > Signed-off-by: Brian Foster <bfoster@redhat.com>
> > > > ---
> > > > 
> > > > Hi all,
> > > > 
> > > > What do folks think of something like this as a lightweight (and
> > > > untested) means to do proper [f]inobt magic verification? For reference,
> > > > the initial version of this put together to help root cause a user
> > > > report is here[1]. I was hoping to do the same thing with less code
> > > > duplication. A couple things that come to mind:
> > > > 
> > > > 1. I know scrub has at least one place where we invoke the verifier with
> > > > ->b_ops == NULL, which will cause this to explode. Could we fix that up
> > > > to assign and reset ->b_ops to accommodate something like this, or is
> > > > that problematic?
> > > 
> > > IIRC one of the scrub findroot reviewers didn't like the idea of scrub
> > > setting b_ops until it was absolutely sure it wanted to.  I think it's
> > > actually ok to patch it in temporarily while running the read verifier
> > > since we have the buffer locked and patch it out afterwards.
> > 
> > How does this interact with xfs_buf_ensure_ops()?
> > 
> > [ side note: the comments about this function are poor - I have no
> > idea what problem it is avoiding from reading the code. Yes, I know
> > it protects against transactions with buffers and no ops, but the
> > comments don't tell me *how or when that occurs* so I do not know
> > where to go looking for potential issues here. ]
> > 
> 
> I think the when and how behind this logic is the scrub case (i.e.,
> xrep_findroot_block()) called out above: we read the buffer with a NULL
> b_ops param because we don't know which buf_ops actually applies. If a
> ->b_ops is not ultimately attached, the buf sits around in cache without
> ->b_ops and is never verified (even if read with a non-NULL b_ops) until
> it cycles out of cache. So without this logic, the aforementioned case
> would have to drop the buffer from the cache if it was ultimately read
> with a NULL b_ops.
> 
> With regard to verifiers depending on ->b_ops != NULL, I don't think
> this would change anything at this level. The higher level scrub code
> would just be required to assign ->b_ops in order to run a verifier and
> thus would have to make sure to reset ->b_ops in the event of a failure.

Ok, easy enough.  I'll also try to fix Dave's complaints about
insufficient commenting for xfs_buf_ensure_ops.

--D

> > > > 2. We have some other verifiers around that actually use the buffer
> > > > magic to set a more specific verifier. See xfs_da3_node_read_verify()
> > > > for an example. I'm not sure this is all that useful for such higher
> > > > level verifiers, but I think we'd at least be able to use it for the
> > > > underlying verifiers. That might provide some extra sb version vs. magic
> > > > sanity checking for places that might not already look at the sb version
> > > > (otherwise it's just refactoring).
> > > > 
> > > > Thoughts or other ideas before I try to apply this more broadly? Thanks.
> > > 
> > > Hmm... not sure if I like the idea that you have to find the b_ops
> > > declaration to figure out which magic number the verifier function is
> > > checking, but I don't really have a cogent objection.
> > 
> > Yeah, I don't really like it either (especially the added CPU
> > overhead that we avoided by doing compile time byte swapping),
> > but I'm struggling to come up with a better option.
> > 
> 
> I suppose we could store the on-disk magics in the xfs_buf_ops
> structures (it works on x86_64 at least, I'd have to verify other
> arches), but that is pretty ugly. Given all of the other conversions and
> checks, I'm not sure it's worth it.
> 
> Hmm, I suppose we could also define a separate set of on-disk magic
> directives:
> 
> #define XFS_FIBT_CRC_MAGIC_DISK        cpu_to_be32(XFS_FIBT_CRC_MAGIC)
> 
> ... and start using those in various places to avoid the ugliness. I
> think that's a separate change though (and again, it's not immediately
> clear to me the benefit justifies the additional code).
> 
> Brian
> 
> > Cheers,
> > 
> > Dave.
> > -- 
> > Dave Chinner
> > david@fromorbit.com

  reply	other threads:[~2019-01-27 17:49 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-24 15:54 [PATCH RFC] xfs: support magic value in xfs_buf_ops Brian Foster
2019-01-24 19:08 ` Darrick J. Wong
2019-01-24 22:19   ` Dave Chinner
2019-01-25 14:43     ` Brian Foster
2019-01-27 17:49       ` Darrick J. Wong [this message]
2019-01-28 21:06       ` Dave Chinner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190127174949.GD4368@magnolia \
    --to=darrick.wong@oracle.com \
    --cc=bfoster@redhat.com \
    --cc=david@fromorbit.com \
    --cc=linux-xfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.