Re: [PATCH V8 3/5] i2c: tegra: Add DMA Support

[Dmitry Osipenko <digetx@gmail.com>]

В Thu, 31 Jan 2019 21:46:48 +0000
Sowjanya Komatineni <skomatineni@nvidia.com> пишет:

> > It works with this change:
> >
> > diff --git a/drivers/i2c/busses/i2c-tegra.c
> > b/drivers/i2c/busses/i2c-tegra.c index fe5b89abc576..8e059e94b94e
> > 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++
> > b/drivers/i2c/busses/i2c-tegra.c @@ -1170,10 +1170,11 @@ static int
> > tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev, time_left,
> > completion_done(&i2c_dev->msg_complete), i2c_dev->msg_err);
> >
> > +       tegra_i2c_init(i2c_dev, true);
> > +
> >         if (likely(i2c_dev->msg_err == I2C_ERR_NONE))
> >                 return 0;
> >  
> > -       tegra_i2c_init(i2c_dev, true);
> >         /* start recovery upon arbitration loss in single master
> > mode */ if (i2c_dev->msg_err == I2C_ERR_ARBITRATION_LOST) {
> >                 if (!i2c_dev->is_multimaster_mode)
> >
> >
> > Which means that HW state is kept dirty after DMA transfer. Please
> > check everything carefully.  
> 
> Identified issue, When I moved logic around for diff changes, INT
> enable isn’t correct for FIFO DATA REQ. Will have proper fix in next
> version. 
> 

Awesome :)