From: Jonathan Cameron <jic23@kernel.org>
To: Beniamin Bia <biabeniamin@outlook.com>
Cc: <lars@metafoo.de>, <Michael.Hennerich@analog.com>,
<knaack.h@gmx.de>, <pmeerw@pmeerw.net>,
<gregkh@linuxfoundation.org>, <linux-iio@vger.kernel.org>,
<devel@driverdev.osuosl.org>, <linux-kernel@vger.kernel.org>,
Beniamin Bia <biabeniamin@gmail.com>,
Beniamin Bia <beniamin.bia@analog.com>
Subject: Re: [PATCH v2 2/2] staging: iio: frequency: ad9833: Load clock using clock framework
Date: Sat, 2 Feb 2019 17:07:20 +0000 [thread overview]
Message-ID: <20190202170720.20dd9e4b@archlinux> (raw)
In-Reply-To: <20190201150138.31481-2-biabeniamin@outlook.com>
On Fri, 1 Feb 2019 17:01:38 +0200
Beniamin Bia <biabeniamin@outlook.com> wrote:
> From: Beniamin Bia <biabeniamin@gmail.com>
>
> The clock frequency is loaded from device-tree using clock framework
> instead of statically value. The change allow configuration of
> the device via device-trees and better initialization sequence.
> This is part of broader effort to add device-tree support to this driver
> and take it out from staging.
>
> Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.
Thanks,
Jonathan
> ---
> Changes in v2:
> -the intermidiate clk variable was replaced by the variable in
> device state
> -st variable may be uninitialized warning was fixed by adding a new
> error label
> drivers/staging/iio/frequency/ad9834.c | 35 ++++++++++++++++++--------
> 1 file changed, 24 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/staging/iio/frequency/ad9834.c b/drivers/staging/iio/frequency/ad9834.c
> index f4f5eaa15e30..f036f75d1f22 100644
> --- a/drivers/staging/iio/frequency/ad9834.c
> +++ b/drivers/staging/iio/frequency/ad9834.c
> @@ -6,6 +6,7 @@
> * Licensed under the GPL-2.
> */
>
> +#include <linux/clk.h>
> #include <linux/interrupt.h>
> #include <linux/workqueue.h>
> #include <linux/device.h>
> @@ -71,7 +72,7 @@
> struct ad9834_state {
> struct spi_device *spi;
> struct regulator *reg;
> - unsigned int mclk;
> + struct clk *mclk;
> unsigned short control;
> unsigned short devid;
> struct spi_transfer xfer;
> @@ -110,12 +111,15 @@ static unsigned int ad9834_calc_freqreg(unsigned long mclk, unsigned long fout)
> static int ad9834_write_frequency(struct ad9834_state *st,
> unsigned long addr, unsigned long fout)
> {
> + unsigned long clk_freq;
> unsigned long regval;
>
> - if (fout > (st->mclk / 2))
> + clk_freq = clk_get_rate(st->mclk);
> +
> + if (fout > (clk_freq / 2))
> return -EINVAL;
>
> - regval = ad9834_calc_freqreg(st->mclk, fout);
> + regval = ad9834_calc_freqreg(clk_freq, fout);
>
> st->freq_data[0] = cpu_to_be16(addr | (regval &
> RES_MASK(AD9834_FREQ_BITS / 2)));
> @@ -415,7 +419,14 @@ static int ad9834_probe(struct spi_device *spi)
> spi_set_drvdata(spi, indio_dev);
> st = iio_priv(indio_dev);
> mutex_init(&st->lock);
> - st->mclk = 25000000;
> + st->mclk = devm_clk_get(&spi->dev, NULL);
> +
> + ret = clk_prepare_enable(st->mclk);
> + if (ret) {
> + dev_err(&spi->dev, "Failed to enable master clock\n");
> + goto error_disable_reg;
> + }
> +
> st->spi = spi;
> st->devid = spi_get_device_id(spi)->driver_data;
> st->reg = reg;
> @@ -460,31 +471,32 @@ static int ad9834_probe(struct spi_device *spi)
> ret = spi_sync(st->spi, &st->msg);
> if (ret) {
> dev_err(&spi->dev, "device init failed\n");
> - goto error_disable_reg;
> + goto error_clock_unprepare;
> }
>
> ret = ad9834_write_frequency(st, AD9834_REG_FREQ0, 1000000);
> if (ret)
> - goto error_disable_reg;
> + goto error_clock_unprepare;
>
> ret = ad9834_write_frequency(st, AD9834_REG_FREQ1, 5000000);
> if (ret)
> - goto error_disable_reg;
> + goto error_clock_unprepare;
>
> ret = ad9834_write_phase(st, AD9834_REG_PHASE0, 512);
> if (ret)
> - goto error_disable_reg;
> + goto error_clock_unprepare;
>
> ret = ad9834_write_phase(st, AD9834_REG_PHASE1, 1024);
> if (ret)
> - goto error_disable_reg;
> + goto error_clock_unprepare;
>
> ret = iio_device_register(indio_dev);
> if (ret)
> - goto error_disable_reg;
> + goto error_clock_unprepare;
>
> return 0;
> -
> +error_clock_unprepare:
> + clk_disable_unprepare(st->mclk);
> error_disable_reg:
> regulator_disable(reg);
>
> @@ -497,6 +509,7 @@ static int ad9834_remove(struct spi_device *spi)
> struct ad9834_state *st = iio_priv(indio_dev);
>
> iio_device_unregister(indio_dev);
> + clk_disable_unprepare(st->mclk);
> regulator_disable(st->reg);
>
> return 0;
prev parent reply other threads:[~2019-02-02 17:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20190201150138.31481-1-biabeniamin@outlook.com>
2019-02-02 17:05 ` [PATCH v2 1/2] staging: iio: frequency: ad9833: Get frequency value statically Jonathan Cameron
[not found] ` <20190201150138.31481-2-biabeniamin@outlook.com>
2019-02-02 17:07 ` Jonathan Cameron [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190202170720.20dd9e4b@archlinux \
--to=jic23@kernel.org \
--cc=Michael.Hennerich@analog.com \
--cc=beniamin.bia@analog.com \
--cc=biabeniamin@gmail.com \
--cc=biabeniamin@outlook.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.