From: Matthias Kaehlcke <mka@chromium.org>
To: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Cc: marcel@holtmann.org, johan.hedberg@gmail.com,
linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org,
hemantg@codeaurora.org, linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH v11 3/3] Bluetooth: hci_qca: Disable IBS state machine and flush Tx buffer
Date: Mon, 4 Feb 2019 09:31:28 -0800 [thread overview]
Message-ID: <20190204173128.GC117604@google.com> (raw)
In-Reply-To: <20190204150643.25165-4-bgodavar@codeaurora.org>
On Mon, Feb 04, 2019 at 08:36:43PM +0530, Balakrishna Godavarthi wrote:
> During hci down we observed IBS sleep commands are queued in the Tx
> buffer and hci_uart_write_work is sending data to the chip which is
> not required as the chip is powered off. This patch will disable IBS
> and flush the Tx buffer before we turn off the chip.
>
> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
> ---
> drivers/bluetooth/hci_qca.c | 17 +++++++++++++++--
> 1 file changed, 15 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index e3cf0dbfc89d..5e03504c4e0c 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -771,16 +771,17 @@ static int qca_enqueue(struct hci_uart *hu, struct sk_buff *skb)
> /* Prepend skb with frame type */
> memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
>
> + spin_lock_irqsave(&qca->hci_ibs_lock, flags);
> +
> /* Don't go to sleep in middle of patch download or
> * Out-Of-Band(GPIOs control) sleep is selected.
> */
> if (!test_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags)) {
> skb_queue_tail(&qca->txq, skb);
> + spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
> return 0;
> }
>
> - spin_lock_irqsave(&qca->hci_ibs_lock, flags);
> -
> /* Act according to current state */
> switch (qca->tx_ibs_state) {
> case HCI_IBS_TX_AWAKE:
> @@ -1275,6 +1276,18 @@ static const struct qca_vreg_data qca_soc_data = {
>
> static void qca_power_shutdown(struct hci_uart *hu)
> {
> + struct qca_data *qca = hu->priv;
> + unsigned long flags;
> +
> + /* From this point we go into power off state. But serial port is
> + * still open, stop queueing the IBS data and flush all the buffered
> + * data in skb's.
> + */
> + spin_lock_irqsave(&qca->hci_ibs_lock, flags);
> + clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
> + qca_flush(hu);
> + spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
> +
> host_set_baudrate(hu, 2400);
> qca_send_power_pulse(hu, QCA_WCN3990_POWEROFF_PULSE);
> qca_power_setup(hu, false);
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
next prev parent reply other threads:[~2019-02-04 17:31 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-04 15:06 [PATCH v11 0/3] Bug fixes for Qualcomm BT chip wcn3990 Balakrishna Godavarthi
2019-02-04 15:06 ` [PATCH v11 1/3] Bluetooth: hci_qca: use wait_until_sent() for power pulses Balakrishna Godavarthi
2019-02-04 15:06 ` [PATCH v11 2/3] Bluetooth: hci_qca: Deassert RTS while baudrate change command Balakrishna Godavarthi
2019-02-04 15:06 ` [PATCH v11 3/3] Bluetooth: hci_qca: Disable IBS state machine and flush Tx buffer Balakrishna Godavarthi
2019-02-04 17:31 ` Matthias Kaehlcke [this message]
2019-02-18 10:50 ` [PATCH v11 0/3] Bug fixes for Qualcomm BT chip wcn3990 Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190204173128.GC117604@google.com \
--to=mka@chromium.org \
--cc=bgodavar@codeaurora.org \
--cc=hemantg@codeaurora.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.