From: Alexey Dobriyan <adobriyan@gmail.com>
To: akpm@linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 4/4] elf: save allocation per exec
Date: Mon, 4 Feb 2019 23:33:10 +0300 [thread overview]
Message-ID: <20190204203310.GD27482@avx2> (raw)
In-Reply-To: <20190204202830.GC27482@avx2>
2 ELF header aren't that large to allocate them on heap.
However, code is bloated by 1.5 KB (!!!) with gcc 8.2 and stack size
grows by ~340 bytes.
The problem is that 2 elf headers are only 128 bytes.
I'm shocked and the patch should not be applied probably.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
---
fs/binfmt_elf.c | 78 ++++++++++++++++++++++++--------------------------------
1 file changed, 34 insertions(+), 44 deletions(-)
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -699,37 +699,29 @@ static int load_elf_binary(struct linux_binprm *bprm)
unsigned long reloc_func_desc __maybe_unused = 0;
int executable_stack = EXSTACK_DEFAULT;
struct pt_regs *regs = current_pt_regs();
- struct {
- struct elfhdr elf_ex;
- struct elfhdr interp_elf_ex;
- } *loc;
+ struct elfhdr elf_ex;
+ struct elfhdr interp_elf_ex;
struct arch_elf_state arch_state = INIT_ARCH_ELF_STATE;
loff_t pos;
- loc = kmalloc(sizeof(*loc), GFP_KERNEL);
- if (!loc) {
- retval = -ENOMEM;
- goto out_ret;
- }
-
/* Get the exec-header */
- loc->elf_ex = *((struct elfhdr *)bprm->buf);
+ elf_ex = *(struct elfhdr *)bprm->buf;
retval = -ENOEXEC;
/* First of all, some simple consistency checks */
- if (memcmp(loc->elf_ex.e_ident, ELFMAG, SELFMAG) != 0)
+ if (memcmp(elf_ex.e_ident, ELFMAG, SELFMAG) != 0)
goto out;
- if (loc->elf_ex.e_type != ET_EXEC && loc->elf_ex.e_type != ET_DYN)
+ if (elf_ex.e_type != ET_EXEC && elf_ex.e_type != ET_DYN)
goto out;
- if (!elf_check_arch(&loc->elf_ex))
+ if (!elf_check_arch(&elf_ex))
goto out;
- if (elf_check_fdpic(&loc->elf_ex))
+ if (elf_check_fdpic(&elf_ex))
goto out;
if (!bprm->file->f_op->mmap)
goto out;
- elf_phdata = load_elf_phdrs(&loc->elf_ex, bprm->file);
+ elf_phdata = load_elf_phdrs(&elf_ex, bprm->file);
if (!elf_phdata)
goto out;
@@ -742,7 +734,7 @@ static int load_elf_binary(struct linux_binprm *bprm)
start_data = 0;
end_data = 0;
- for (i = 0; i < loc->elf_ex.e_phnum; i++) {
+ for (i = 0; i < elf_ex.e_phnum; i++) {
if (elf_ppnt->p_type == PT_INTERP) {
/* This is the program interpreter used for
* shared libraries - for now assume that this
@@ -786,9 +778,9 @@ static int load_elf_binary(struct linux_binprm *bprm)
/* Get the exec headers */
pos = 0;
- retval = kernel_read(interpreter, &loc->interp_elf_ex,
- sizeof(loc->interp_elf_ex), &pos);
- if (retval != sizeof(loc->interp_elf_ex)) {
+ retval = kernel_read(interpreter, &interp_elf_ex,
+ sizeof(interp_elf_ex), &pos);
+ if (retval != sizeof(interp_elf_ex)) {
if (retval >= 0)
retval = -EIO;
goto out_free_dentry;
@@ -800,7 +792,7 @@ static int load_elf_binary(struct linux_binprm *bprm)
}
elf_ppnt = elf_phdata;
- for (i = 0; i < loc->elf_ex.e_phnum; i++, elf_ppnt++)
+ for (i = 0; i < elf_ex.e_phnum; i++, elf_ppnt++)
switch (elf_ppnt->p_type) {
case PT_GNU_STACK:
if (elf_ppnt->p_flags & PF_X)
@@ -810,7 +802,7 @@ static int load_elf_binary(struct linux_binprm *bprm)
break;
case PT_LOPROC ... PT_HIPROC:
- retval = arch_elf_pt_proc(&loc->elf_ex, elf_ppnt,
+ retval = arch_elf_pt_proc(&elf_ex, elf_ppnt,
bprm->file, false,
&arch_state);
if (retval)
@@ -822,25 +814,25 @@ static int load_elf_binary(struct linux_binprm *bprm)
if (elf_interpreter) {
retval = -ELIBBAD;
/* Not an ELF interpreter */
- if (memcmp(loc->interp_elf_ex.e_ident, ELFMAG, SELFMAG) != 0)
+ if (memcmp(interp_elf_ex.e_ident, ELFMAG, SELFMAG) != 0)
goto out_free_dentry;
/* Verify the interpreter has a valid arch */
- if (!elf_check_arch(&loc->interp_elf_ex) ||
- elf_check_fdpic(&loc->interp_elf_ex))
+ if (!elf_check_arch(&interp_elf_ex) ||
+ elf_check_fdpic(&interp_elf_ex))
goto out_free_dentry;
/* Load the interpreter program headers */
- interp_elf_phdata = load_elf_phdrs(&loc->interp_elf_ex,
+ interp_elf_phdata = load_elf_phdrs(&interp_elf_ex,
interpreter);
if (!interp_elf_phdata)
goto out_free_dentry;
/* Pass PT_LOPROC..PT_HIPROC headers to arch code */
elf_ppnt = interp_elf_phdata;
- for (i = 0; i < loc->interp_elf_ex.e_phnum; i++, elf_ppnt++)
+ for (i = 0; i < interp_elf_ex.e_phnum; i++, elf_ppnt++)
switch (elf_ppnt->p_type) {
case PT_LOPROC ... PT_HIPROC:
- retval = arch_elf_pt_proc(&loc->interp_elf_ex,
+ retval = arch_elf_pt_proc(&interp_elf_ex,
elf_ppnt, interpreter,
true, &arch_state);
if (retval)
@@ -854,8 +846,8 @@ static int load_elf_binary(struct linux_binprm *bprm)
* still possible to return an error to the code that invoked
* the exec syscall.
*/
- retval = arch_check_elf(&loc->elf_ex,
- !!interpreter, &loc->interp_elf_ex,
+ retval = arch_check_elf(&elf_ex,
+ !!interpreter, &interp_elf_ex,
&arch_state);
if (retval)
goto out_free_dentry;
@@ -867,8 +859,8 @@ static int load_elf_binary(struct linux_binprm *bprm)
/* Do this immediately, since STACK_TOP as used in setup_arg_pages
may depend on the personality. */
- SET_PERSONALITY2(loc->elf_ex, &arch_state);
- if (elf_read_implies_exec(loc->elf_ex, executable_stack))
+ SET_PERSONALITY2(elf_ex, &arch_state);
+ if (elf_read_implies_exec(elf_ex, executable_stack))
current->personality |= READ_IMPLIES_EXEC;
if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space)
@@ -889,7 +881,7 @@ static int load_elf_binary(struct linux_binprm *bprm)
/* Now we do a little grungy work by mmapping the ELF image into
the correct location in memory. */
for(i = 0, elf_ppnt = elf_phdata;
- i < loc->elf_ex.e_phnum; i++, elf_ppnt++) {
+ i < elf_ex.e_phnum; i++, elf_ppnt++) {
int elf_prot = 0, elf_flags, elf_fixed = MAP_FIXED_NOREPLACE;
unsigned long k, vaddr;
unsigned long total_size = 0;
@@ -945,9 +937,9 @@ static int load_elf_binary(struct linux_binprm *bprm)
* If we are loading ET_EXEC or we have already performed
* the ET_DYN load_addr calculations, proceed normally.
*/
- if (loc->elf_ex.e_type == ET_EXEC || load_addr_set) {
+ if (elf_ex.e_type == ET_EXEC || load_addr_set) {
elf_flags |= elf_fixed;
- } else if (loc->elf_ex.e_type == ET_DYN) {
+ } else if (elf_ex.e_type == ET_DYN) {
/*
* This logic is run once for the first LOAD Program
* Header for ET_DYN binaries to calculate the
@@ -996,7 +988,7 @@ static int load_elf_binary(struct linux_binprm *bprm)
load_bias = ELF_PAGESTART(load_bias - vaddr);
total_size = total_mapping_size(elf_phdata,
- loc->elf_ex.e_phnum);
+ elf_ex.e_phnum);
if (!total_size) {
retval = -EINVAL;
goto out_free_dentry;
@@ -1014,7 +1006,7 @@ static int load_elf_binary(struct linux_binprm *bprm)
if (!load_addr_set) {
load_addr_set = 1;
load_addr = (elf_ppnt->p_vaddr - elf_ppnt->p_offset);
- if (loc->elf_ex.e_type == ET_DYN) {
+ if (elf_ex.e_type == ET_DYN) {
load_bias += error -
ELF_PAGESTART(load_bias + vaddr);
load_addr += load_bias;
@@ -1055,7 +1047,7 @@ static int load_elf_binary(struct linux_binprm *bprm)
}
}
- loc->elf_ex.e_entry += load_bias;
+ elf_ex.e_entry += load_bias;
elf_bss += load_bias;
elf_brk += load_bias;
start_code += load_bias;
@@ -1079,7 +1071,7 @@ static int load_elf_binary(struct linux_binprm *bprm)
if (elf_interpreter) {
unsigned long interp_map_addr = 0;
- elf_entry = load_elf_interp(&loc->interp_elf_ex,
+ elf_entry = load_elf_interp(&interp_elf_ex,
interpreter,
&interp_map_addr,
load_bias, interp_elf_phdata);
@@ -1089,7 +1081,7 @@ static int load_elf_binary(struct linux_binprm *bprm)
* adjustment
*/
interp_load_addr = elf_entry;
- elf_entry += loc->interp_elf_ex.e_entry;
+ elf_entry += interp_elf_ex.e_entry;
}
if (BAD_ADDR(elf_entry)) {
retval = IS_ERR((void *)elf_entry) ?
@@ -1102,7 +1094,7 @@ static int load_elf_binary(struct linux_binprm *bprm)
fput(interpreter);
kfree(elf_interpreter);
} else {
- elf_entry = loc->elf_ex.e_entry;
+ elf_entry = elf_ex.e_entry;
if (BAD_ADDR(elf_entry)) {
retval = -EINVAL;
goto out_free_dentry;
@@ -1120,7 +1112,7 @@ static int load_elf_binary(struct linux_binprm *bprm)
goto out;
#endif /* ARCH_HAS_SETUP_ADDITIONAL_PAGES */
- retval = create_elf_tables(bprm, &loc->elf_ex,
+ retval = create_elf_tables(bprm, &elf_ex,
load_addr, interp_load_addr);
if (retval < 0)
goto out;
@@ -1166,8 +1158,6 @@ static int load_elf_binary(struct linux_binprm *bprm)
start_thread(regs, elf_entry, bprm->p);
retval = 0;
out:
- kfree(loc);
-out_ret:
return retval;
/* error cleanup */
next prev parent reply other threads:[~2019-02-04 20:33 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-04 20:27 [PATCH 1/4] elf: don't be afraid of overflow Alexey Dobriyan
2019-02-04 20:28 ` [PATCH 2/4] elf: use list_for_each_entry() Alexey Dobriyan
2019-02-04 20:28 ` [PATCH 3/4] elf: spread const a little Alexey Dobriyan
2019-02-04 20:33 ` Alexey Dobriyan [this message]
2019-02-12 15:49 ` [PATCH 2/4] elf: use list_for_each_entry() kbuild test robot
2019-02-12 16:21 ` kbuild test robot
2019-03-11 11:04 ` [PATCH 1/4] elf: don't be afraid of overflow Pavel Machek
2019-03-11 17:10 ` Alexey Dobriyan
2019-03-12 9:37 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190204203310.GD27482@avx2 \
--to=adobriyan@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.