From: Lukasz Majewski <lukma@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/8] power: stpmu1: rename files to stpmic1
Date: Tue, 5 Feb 2019 07:33:06 +0100 [thread overview]
Message-ID: <20190205073306.5b2e5267@jawa> (raw)
In-Reply-To: <1549275982-15102-3-git-send-email-patrick.delaunay@st.com>
On Mon, 4 Feb 2019 11:26:16 +0100
Patrick Delaunay <patrick.delaunay@st.com> wrote:
> Prepare file modification for kernel alignment and
> rename driver to stpmic1.
>
> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
> ---
>
> arch/arm/dts/stm32mp157c-ed1.dts | 2 +-
> board/st/stm32mp1/board.c | 2 +-
> board/st/stm32mp1/spl.c | 2 +-
> drivers/power/pmic/Makefile | 2 +-
> drivers/power/pmic/{stpmu1.c => stpmic1.c} | 2 +-
> drivers/power/regulator/Makefile | 2 +-
> drivers/power/regulator/{stpmu1.c => stpmic1.c} | 2 +-
> include/dt-bindings/mfd/{st,stpmu1.h => st,stpmic1.h} | 0
> include/power/{stpmu1.h => stpmic1.h} | 0
> 9 files changed, 7 insertions(+), 7 deletions(-)
> rename drivers/power/pmic/{stpmu1.c => stpmic1.c} (98%)
> rename drivers/power/regulator/{stpmu1.c => stpmic1.c} (99%)
> rename include/dt-bindings/mfd/{st,stpmu1.h => st,stpmic1.h} (100%)
> rename include/power/{stpmu1.h => stpmic1.h} (100%)
>
> diff --git a/arch/arm/dts/stm32mp157c-ed1.dts
> b/arch/arm/dts/stm32mp157c-ed1.dts index 7a9b742..ddee286 100644
> --- a/arch/arm/dts/stm32mp157c-ed1.dts
> +++ b/arch/arm/dts/stm32mp157c-ed1.dts
> @@ -8,7 +8,7 @@
> #include "stm32mp157c.dtsi"
> #include "stm32mp157-pinctrl.dtsi"
> #include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/mfd/st,stpmu1.h>
> +#include <dt-bindings/mfd/st,stpmic1.h>
>
> / {
> model = "STMicroelectronics STM32MP157C eval daughter";
> diff --git a/board/st/stm32mp1/board.c b/board/st/stm32mp1/board.c
> index 5f31ea9..1bb9779 100644
> --- a/board/st/stm32mp1/board.c
> +++ b/board/st/stm32mp1/board.c
> @@ -8,7 +8,7 @@
> #include <asm/io.h>
> #include <asm/arch/ddr.h>
> #include <power/pmic.h>
> -#include <power/stpmu1.h>
> +#include <power/stpmic1.h>
>
> #ifdef CONFIG_DEBUG_UART_BOARD_INIT
> void board_debug_uart_init(void)
> diff --git a/board/st/stm32mp1/spl.c b/board/st/stm32mp1/spl.c
> index f3db0d6..1202297 100644
> --- a/board/st/stm32mp1/spl.c
> +++ b/board/st/stm32mp1/spl.c
> @@ -11,7 +11,7 @@
> #include <asm/io.h>
> #include <post.h>
> #include <power/pmic.h>
> -#include <power/stpmu1.h>
> +#include <power/stpmic1.h>
> #include <asm/arch/ddr.h>
>
> void spl_board_init(void)
> diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
> index 637352a..147ac76 100644
> --- a/drivers/power/pmic/Makefile
> +++ b/drivers/power/pmic/Makefile
> @@ -23,7 +23,7 @@ obj-$(CONFIG_DM_PMIC_TPS65910) += pmic_tps65910_dm.o
> obj-$(CONFIG_$(SPL_)PMIC_PALMAS) += palmas.o
> obj-$(CONFIG_$(SPL_)PMIC_LP873X) += lp873x.o
> obj-$(CONFIG_$(SPL_)PMIC_LP87565) += lp87565.o
> -obj-$(CONFIG_PMIC_STPMU1) += stpmu1.o
> +obj-$(CONFIG_PMIC_STPMU1) += stpmic1.o
>
> obj-$(CONFIG_POWER_LTC3676) += pmic_ltc3676.o
> obj-$(CONFIG_POWER_MAX77696) += pmic_max77696.o
> diff --git a/drivers/power/pmic/stpmu1.c
> b/drivers/power/pmic/stpmic1.c similarity index 98%
> rename from drivers/power/pmic/stpmu1.c
> rename to drivers/power/pmic/stpmic1.c
> index 47af012..157ce8b 100644
> --- a/drivers/power/pmic/stpmu1.c
> +++ b/drivers/power/pmic/stpmic1.c
> @@ -8,7 +8,7 @@
> #include <errno.h>
> #include <i2c.h>
> #include <power/pmic.h>
> -#include <power/stpmu1.h>
> +#include <power/stpmic1.h>
>
> #define STMPU1_NUM_OF_REGS 0x100
>
> diff --git a/drivers/power/regulator/Makefile
> b/drivers/power/regulator/Makefile index f617ce7..cfc91e8 100644
> --- a/drivers/power/regulator/Makefile
> +++ b/drivers/power/regulator/Makefile
> @@ -24,4 +24,4 @@ obj-$(CONFIG_$(SPL_)DM_REGULATOR_LP873X) +=
> lp873x_regulator.o obj-$(CONFIG_$(SPL_)DM_REGULATOR_LP87565) +=
> lp87565_regulator.o obj-$(CONFIG_$(SPL_)DM_REGULATOR_STM32_VREFBUF)
> += stm32-vrefbuf.o obj-$(CONFIG_DM_REGULATOR_TPS65910) +=
> tps65910_regulator.o -obj-$(CONFIG_$(SPL_)DM_REGULATOR_STPMU1) +=
> stpmu1.o +obj-$(CONFIG_$(SPL_)DM_REGULATOR_STPMU1) += stpmic1.o
> diff --git a/drivers/power/regulator/stpmu1.c
> b/drivers/power/regulator/stpmic1.c similarity index 99%
> rename from drivers/power/regulator/stpmu1.c
> rename to drivers/power/regulator/stpmic1.c
> index 2e64051..c62a19a 100644
> --- a/drivers/power/regulator/stpmu1.c
> +++ b/drivers/power/regulator/stpmic1.c
> @@ -9,7 +9,7 @@
> #include <errno.h>
> #include <power/pmic.h>
> #include <power/regulator.h>
> -#include <power/stpmu1.h>
> +#include <power/stpmic1.h>
>
> struct stpmu1_range {
> int min_uv;
> diff --git a/include/dt-bindings/mfd/st,stpmu1.h
> b/include/dt-bindings/mfd/st,stpmic1.h similarity index 100%
> rename from include/dt-bindings/mfd/st,stpmu1.h
> rename to include/dt-bindings/mfd/st,stpmic1.h
> diff --git a/include/power/stpmu1.h b/include/power/stpmic1.h
> similarity index 100%
> rename from include/power/stpmu1.h
> rename to include/power/stpmic1.h
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190205/46c1f185/attachment.sig>
next prev parent reply other threads:[~2019-02-05 6:33 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-04 10:26 [U-Boot] [PATCH 0/8] pmic: stpmic1: rename and update stpmic1 driver Patrick Delaunay
2019-02-04 10:26 ` [U-Boot] [PATCH 1/8] regulator: stpmu1: update buck1 range Patrick Delaunay
2019-02-04 10:26 ` [U-Boot] [PATCH 2/8] power: stpmu1: rename files to stpmic1 Patrick Delaunay
2019-02-05 6:33 ` Lukasz Majewski [this message]
2019-02-04 10:26 ` [U-Boot] [PATCH 3/8] power: rename stpmu1 to official name stpmic1 Patrick Delaunay
2019-02-05 6:33 ` Lukasz Majewski
2019-02-04 10:26 ` [U-Boot] [PATCH 4/8] stpmic1: update register names Patrick Delaunay
2019-02-04 10:26 ` [U-Boot] [PATCH 5/8] pmic: stpmu1: add power switch off support Patrick Delaunay
2019-02-04 10:26 ` [U-Boot] [PATCH 6/8] stm32mp1: add command poweroff Patrick Delaunay
2019-02-04 10:26 ` [U-Boot] [PATCH 7/8] stm32mp1: dts: activate psci-1.0 Patrick Delaunay
2019-02-04 10:26 ` [U-Boot] [PATCH 8/8] stpmic1: add NVM update support in fuse command Patrick Delaunay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190205073306.5b2e5267@jawa \
--to=lukma@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.