From: Matthias Kaehlcke <mka@chromium.org>
To: Amit Kucheria <amit.kucheria@linaro.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
bjorn.andersson@linaro.org, edubezval@gmail.com,
andy.gross@linaro.org, tdas@codeaurora.org, swboyd@chromium.org,
dianders@chromium.org, David Brown <david.brown@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Rajendra Nayak <rnayak@codeaurora.org>,
devicetree@vger.kernel.org
Subject: Re: [PATCH v4 1/1] arm64: dts: sdm845: wireup the thermal trip points to cpufreq
Date: Wed, 6 Feb 2019 18:00:51 -0800 [thread overview]
Message-ID: <20190207020051.GL117604@google.com> (raw)
In-Reply-To: <edfe493e2f2034d531702c333c5acb4fabfbbb97.1549448839.git.amit.kucheria@linaro.org>
On Wed, Feb 06, 2019 at 04:04:49PM +0530, Amit Kucheria wrote:
> Since all cpus in the big and little clusters, respectively, are in the
> same frequency domain, use all of them for mitigation in the
> cooling-map. We end up with two cooling devices - one each for the big
> and little clusters.
>
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> Acked-by: Eduardo Valentin <edubezval@gmail.com>
> ---
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 241 ++++++++++++++++++++++++---
> 1 file changed, 217 insertions(+), 24 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index c27cbd3bcb0a..8ce5bf55a345 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -13,6 +13,7 @@
> #include <dt-bindings/reset/qcom,sdm845-aoss.h>
> #include <dt-bindings/soc/qcom,rpmh-rsc.h>
> #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> +#include <dt-bindings/thermal/thermal.h>
>
> / {
> interrupt-parent = <&intc>;
> @@ -99,6 +100,7 @@
> compatible = "qcom,kryo385";
> reg = <0x0 0x0>;
> enable-method = "psci";
> + #cooling-cells = <2>;
> next-level-cache = <&L2_0>;
> L2_0: l2-cache {
> compatible = "cache";
> @@ -114,6 +116,7 @@
> compatible = "qcom,kryo385";
> reg = <0x0 0x100>;
> enable-method = "psci";
> + #cooling-cells = <2>;
> next-level-cache = <&L2_100>;
> L2_100: l2-cache {
> compatible = "cache";
> @@ -126,6 +129,7 @@
> compatible = "qcom,kryo385";
> reg = <0x0 0x200>;
> enable-method = "psci";
> + #cooling-cells = <2>;
> next-level-cache = <&L2_200>;
> L2_200: l2-cache {
> compatible = "cache";
> @@ -138,6 +142,7 @@
> compatible = "qcom,kryo385";
> reg = <0x0 0x300>;
> enable-method = "psci";
> + #cooling-cells = <2>;
> next-level-cache = <&L2_300>;
> L2_300: l2-cache {
> compatible = "cache";
> @@ -150,6 +155,7 @@
> compatible = "qcom,kryo385";
> reg = <0x0 0x400>;
> enable-method = "psci";
> + #cooling-cells = <2>;
> next-level-cache = <&L2_400>;
> L2_400: l2-cache {
> compatible = "cache";
> @@ -162,6 +168,7 @@
> compatible = "qcom,kryo385";
> reg = <0x0 0x500>;
> enable-method = "psci";
> + #cooling-cells = <2>;
> next-level-cache = <&L2_500>;
> L2_500: l2-cache {
> compatible = "cache";
> @@ -174,6 +181,7 @@
> compatible = "qcom,kryo385";
> reg = <0x0 0x600>;
> enable-method = "psci";
> + #cooling-cells = <2>;
> next-level-cache = <&L2_600>;
> L2_600: l2-cache {
> compatible = "cache";
> @@ -186,6 +194,7 @@
> compatible = "qcom,kryo385";
> reg = <0x0 0x700>;
> enable-method = "psci";
> + #cooling-cells = <2>;
> next-level-cache = <&L2_700>;
> L2_700: l2-cache {
> compatible = "cache";
> @@ -1691,18 +1700,41 @@
> thermal-sensors = <&tsens0 1>;
>
> trips {
> - cpu_alert0: trip0 {
> - temperature = <75000>;
> + cpu0_alert0: trip-point@0 {
> + temperature = <90000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
> - cpu_crit0: trip1 {
> + cpu0_alert1: trip-point@1 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu0_crit: cpu_crit {
> temperature = <110000>;
> hysteresis = <1000>;
> type = "critical";
> };
> };
> +
> + cooling-maps {
> + map0 {
> + trip = <&cpu0_alert0>;
> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + map1 {
> + trip = <&cpu0_alert1>;
> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> };
>
> cpu1-thermal {
> @@ -1712,18 +1744,41 @@
> thermal-sensors = <&tsens0 2>;
>
> trips {
> - cpu_alert1: trip0 {
> - temperature = <75000>;
> + cpu1_alert0: trip-point@0 {
> + temperature = <90000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
> - cpu_crit1: trip1 {
> + cpu1_alert1: trip-point@1 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu1_crit: cpu_crit {
> temperature = <110000>;
> hysteresis = <1000>;
> type = "critical";
> };
> };
> +
> + cooling-maps {
> + map0 {
> + trip = <&cpu1_alert0>;
> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + map1 {
> + trip = <&cpu1_alert1>;
> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> };
>
> cpu2-thermal {
> @@ -1733,18 +1788,41 @@
> thermal-sensors = <&tsens0 3>;
>
> trips {
> - cpu_alert2: trip0 {
> - temperature = <75000>;
> + cpu2_alert0: trip-point@0 {
> + temperature = <90000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
> - cpu_crit2: trip1 {
> + cpu2_alert1: trip-point@1 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu2_crit: cpu_crit {
> temperature = <110000>;
> hysteresis = <1000>;
> type = "critical";
> };
> };
> +
> + cooling-maps {
> + map0 {
> + trip = <&cpu2_alert0>;
> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + map1 {
> + trip = <&cpu2_alert1>;
> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> };
>
> cpu3-thermal {
> @@ -1754,18 +1832,41 @@
> thermal-sensors = <&tsens0 4>;
>
> trips {
> - cpu_alert3: trip0 {
> - temperature = <75000>;
> + cpu3_alert0: trip-point@0 {
> + temperature = <90000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
> - cpu_crit3: trip1 {
> + cpu3_alert1: trip-point@1 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu3_crit: cpu_crit {
> temperature = <110000>;
> hysteresis = <1000>;
> type = "critical";
> };
> };
> +
> + cooling-maps {
> + map0 {
> + trip = <&cpu3_alert0>;
> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + map1 {
> + trip = <&cpu3_alert1>;
> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> };
>
> cpu4-thermal {
> @@ -1775,18 +1876,41 @@
> thermal-sensors = <&tsens0 7>;
>
> trips {
> - cpu_alert4: trip0 {
> - temperature = <75000>;
> + cpu4_alert0: trip-point@0 {
> + temperature = <90000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
> - cpu_crit4: trip1 {
> + cpu4_alert1: trip-point@1 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu4_crit: cpu_crit {
> temperature = <110000>;
> hysteresis = <1000>;
> type = "critical";
> };
> };
> +
> + cooling-maps {
> + map0 {
> + trip = <&cpu4_alert0>;
> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + map1 {
> + trip = <&cpu4_alert1>;
> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> };
>
> cpu5-thermal {
> @@ -1796,18 +1920,41 @@
> thermal-sensors = <&tsens0 8>;
>
> trips {
> - cpu_alert5: trip0 {
> - temperature = <75000>;
> + cpu5_alert0: trip-point@0 {
> + temperature = <90000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
> - cpu_crit5: trip1 {
> + cpu5_alert1: trip-point@1 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu5_crit: cpu_crit {
> temperature = <110000>;
> hysteresis = <1000>;
> type = "critical";
> };
> };
> +
> + cooling-maps {
> + map0 {
> + trip = <&cpu5_alert0>;
> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + map1 {
> + trip = <&cpu5_alert1>;
> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> };
>
> cpu6-thermal {
> @@ -1817,18 +1964,41 @@
> thermal-sensors = <&tsens0 9>;
>
> trips {
> - cpu_alert6: trip0 {
> - temperature = <75000>;
> + cpu6_alert0: trip-point@0 {
> + temperature = <90000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
> - cpu_crit6: trip1 {
> + cpu6_alert1: trip-point@1 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu6_crit: cpu_crit {
> temperature = <110000>;
> hysteresis = <1000>;
> type = "critical";
> };
> };
> +
> + cooling-maps {
> + map0 {
> + trip = <&cpu6_alert0>;
> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + map1 {
> + trip = <&cpu6_alert1>;
> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> };
>
> cpu7-thermal {
> @@ -1838,18 +2008,41 @@
> thermal-sensors = <&tsens0 10>;
>
> trips {
> - cpu_alert7: trip0 {
> - temperature = <75000>;
> + cpu7_alert0: trip-point@0 {
> + temperature = <90000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
> - cpu_crit7: trip1 {
> + cpu7_alert1: trip-point@1 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu7_crit: cpu_crit {
> temperature = <110000>;
> hysteresis = <1000>;
> type = "critical";
> };
> };
> +
> + cooling-maps {
> + map0 {
> + trip = <&cpu7_alert0>;
> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + map1 {
> + trip = <&cpu7_alert1>;
> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> };
> };
> };
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Thanks
Matthias
prev parent reply other threads:[~2019-02-07 2:00 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-06 10:34 [PATCH v4 0/1] Thermal throttling for SDM845 Amit Kucheria
2019-02-06 10:34 ` Amit Kucheria
2019-02-06 10:34 ` [PATCH v4 1/1] arm64: dts: sdm845: wireup the thermal trip points to cpufreq Amit Kucheria
2019-02-07 2:00 ` Matthias Kaehlcke [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190207020051.GL117604@google.com \
--to=mka@chromium.org \
--cc=amit.kucheria@linaro.org \
--cc=andy.gross@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=edubezval@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rnayak@codeaurora.org \
--cc=robh+dt@kernel.org \
--cc=swboyd@chromium.org \
--cc=tdas@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.