All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-kernel@vger.kernel.org,
	Michael Jamet <michael.jamet@intel.com>,
	Yehezkel Bernat <YehezkelShB@gmail.com>,
	Andreas Noever <andreas.noever@gmail.com>,
	Lukas Wunner <lukas@wunner.de>,
	"David S . Miller" <davem@davemloft.net>,
	netdev@vger.kernel.org
Subject: Re: [PATCH v2 00/28] thunderbolt: Software connection manager improvements
Date: Thu, 7 Feb 2019 16:22:46 +0200	[thread overview]
Message-ID: <20190207142246.GG9224@smile.fi.intel.com> (raw)
In-Reply-To: <20190206131738.43696-1-mika.westerberg@linux.intel.com>

On Wed, Feb 06, 2019 at 04:17:10PM +0300, Mika Westerberg wrote:
> Hi,
> 
> Software connection manager (drivers/thunderbolt/tb.c) is used on older
> Apple hardware with Light Ridge, Cactus Ridge or Falcon Ridge controllers
> to create PCIe tunnels when a Thunderbolt device is connected. Currently
> only one PCIe tunnel is supported. On newer Alpine Ridge based Apple
> systems the driver starts the firmware which then takes care creating
> tunnels.
> 
> This series improves the software connection manager so that it will
> support:
> 
>   - Full PCIe daisy chains (up to 6 devices)
>   - Display Port tunneling
>   - P2P networking
> 
> We also add support for Titan Ridge based Apple systems where we can use
> the same flows than with Alpine Ridge to start the firmware.
> 
> Note in order to prevent possible DMA attacks on these systems we should
> make sure IOMMU is enabled. One option is to force dmar_platform_optin()
> return true on Apple hardware. However, it is not part of this series. I'm
> trusting people using Linux on such systems to take care of it.  :-)
> 
> Previous version of the patch series can be viewed here:
> 
>   https://lkml.org/lkml/2019/1/29/924


From code style and some other things we discussed off list the series looks
good to me.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Though minor comments per individual patches are provided.

> 
> Changes from v1:
> 
>   * Added ACK from David
> 
>   * Add constant (TMU_ACCESS_EN) for BIT(20) when TMU access is enabled. We
>     keep it in cap.c close to the LR/ER workaround. Also we enable/disable
>     only during capability walk. If it turns we need to have it enabled
>     elsewhere we can move it to switch.c and enable just once during
>     switch enumeration.
> 
>   * Use 0 to mean no cap_adap instead of negative value. This follows
>     cap_phy.
> 
>   * Use correct PCI IDs (_BRIDGE) in the last patch where we start firmware
>     on Titan Ridge. It wrongly used NHI PCI IDs in v1.
> 
> Mika Westerberg (28):
>   net: thunderbolt: Unregister ThunderboltIP protocol handler when suspending
>   thunderbolt: Do not allocate switch if depth is greater than 6
>   thunderbolt: Enable TMU access when accessing port space on legacy devices
>   thunderbolt: Add dummy read after port capability list walk on Light Ridge
>   thunderbolt: Move LC specific functionality into a separate file
>   thunderbolt: Configure lanes when switch is initialized
>   thunderbolt: Set sleep bit when suspending switch
>   thunderbolt: Properly disable path
>   thunderbolt: Cache adapter specific capability offset into struct port
>   thunderbolt: Rename tunnel_pci to tunnel
>   thunderbolt: Generalize tunnel creation functionality
>   thunderbolt: Add functions for allocating and releasing hop IDs
>   thunderbolt: Add helper function to iterate from one port to another
>   thunderbolt: Extend tunnel creation to more than 2 adjacent switches
>   thunderbolt: Deactivate all paths before restarting them
>   thunderbolt: Discover preboot PCIe paths the boot firmware established
>   thunderbolt: Add support for full PCIe daisy chains
>   thunderbolt: Scan only valid NULL adapter ports in hotplug
>   thunderbolt: Generalize port finding routines to support all port types
>   thunderbolt: Rework NFC credits handling
>   thunderbolt: Add support for Display Port tunnels
>   thunderbolt: Run tb_xdp_handle_request() in system workqueue
>   thunderbolt: Add XDomain UUID exchange support
>   thunderbolt: Add support for DMA tunnels
>   thunderbolt: Make tb_switch_alloc() return ERR_PTR()
>   thunderbolt: Add support for XDomain connections
>   thunderbolt: Make rest of the logging to happen at debug level
>   thunderbolt: Start firmware on Titan Ridge Apple systems
> 
>  drivers/net/thunderbolt.c        |   3 +
>  drivers/thunderbolt/Makefile     |   4 +-
>  drivers/thunderbolt/cap.c        |  90 +++-
>  drivers/thunderbolt/ctl.c        |   2 +-
>  drivers/thunderbolt/icm.c        |  15 +-
>  drivers/thunderbolt/lc.c         | 179 ++++++++
>  drivers/thunderbolt/path.c       | 326 +++++++++++++--
>  drivers/thunderbolt/switch.c     | 466 ++++++++++++++++++---
>  drivers/thunderbolt/tb.c         | 529 ++++++++++++++++++------
>  drivers/thunderbolt/tb.h         |  67 ++-
>  drivers/thunderbolt/tb_msgs.h    |  11 +
>  drivers/thunderbolt/tb_regs.h    |  50 ++-
>  drivers/thunderbolt/tunnel.c     | 681 +++++++++++++++++++++++++++++++
>  drivers/thunderbolt/tunnel.h     |  75 ++++
>  drivers/thunderbolt/tunnel_pci.c | 226 ----------
>  drivers/thunderbolt/tunnel_pci.h |  31 --
>  drivers/thunderbolt/xdomain.c    | 142 ++++++-
>  include/linux/thunderbolt.h      |   8 +
>  18 files changed, 2389 insertions(+), 516 deletions(-)
>  create mode 100644 drivers/thunderbolt/lc.c
>  create mode 100644 drivers/thunderbolt/tunnel.c
>  create mode 100644 drivers/thunderbolt/tunnel.h
>  delete mode 100644 drivers/thunderbolt/tunnel_pci.c
>  delete mode 100644 drivers/thunderbolt/tunnel_pci.h
> 
> -- 
> 2.20.1
> 

-- 
With Best Regards,
Andy Shevchenko



      parent reply	other threads:[~2019-02-07 14:22 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-06 13:17 [PATCH v2 00/28] thunderbolt: Software connection manager improvements Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 01/28] net: thunderbolt: Unregister ThunderboltIP protocol handler when suspending Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 02/28] thunderbolt: Do not allocate switch if depth is greater than 6 Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 03/28] thunderbolt: Enable TMU access when accessing port space on legacy devices Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 04/28] thunderbolt: Add dummy read after port capability list walk on Light Ridge Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 05/28] thunderbolt: Move LC specific functionality into a separate file Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 06/28] thunderbolt: Configure lanes when switch is initialized Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 07/28] thunderbolt: Set sleep bit when suspending switch Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 08/28] thunderbolt: Properly disable path Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 09/28] thunderbolt: Cache adapter specific capability offset into struct port Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 10/28] thunderbolt: Rename tunnel_pci to tunnel Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 11/28] thunderbolt: Generalize tunnel creation functionality Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 12/28] thunderbolt: Add functions for allocating and releasing hop IDs Mika Westerberg
2019-02-10 12:13   ` Lukas Wunner
2019-02-11  8:30     ` Mika Westerberg
2019-02-12 12:43       ` Lukas Wunner
2019-02-12 12:51         ` Mika Westerberg
2019-02-12 12:59           ` Lukas Wunner
2019-02-12 13:02             ` Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 13/28] thunderbolt: Add helper function to iterate from one port to another Mika Westerberg
2019-02-07 14:33   ` Andy Shevchenko
2019-02-11  6:16   ` Lukas Wunner
2019-02-11  9:54     ` Mika Westerberg
2019-02-12 13:55       ` Lukas Wunner
2019-02-12 19:03         ` Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 14/28] thunderbolt: Extend tunnel creation to more than 2 adjacent switches Mika Westerberg
2019-02-10 15:33   ` Lukas Wunner
2019-02-11  8:45     ` Mika Westerberg
2019-02-12 12:54       ` Lukas Wunner
2019-02-06 13:17 ` [PATCH v2 15/28] thunderbolt: Deactivate all paths before restarting them Mika Westerberg
2019-02-11  6:35   ` Lukas Wunner
2019-02-11  8:52     ` Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 16/28] thunderbolt: Discover preboot PCIe paths the boot firmware established Mika Westerberg
2019-02-12 17:49   ` Lukas Wunner
2019-02-12 18:34     ` Mika Westerberg
2019-02-12 19:42   ` Lukas Wunner
2019-02-13  8:30     ` Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 17/28] thunderbolt: Add support for full PCIe daisy chains Mika Westerberg
2019-03-24 11:31   ` Lukas Wunner
2019-03-25  9:57     ` Mika Westerberg
2019-03-25 11:16       ` Lukas Wunner
2019-03-25 11:22         ` Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 18/28] thunderbolt: Scan only valid NULL adapter ports in hotplug Mika Westerberg
2019-02-12 14:04   ` Lukas Wunner
2019-02-12 18:46     ` Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 19/28] thunderbolt: Generalize port finding routines to support all port types Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 20/28] thunderbolt: Rework NFC credits handling Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 21/28] thunderbolt: Add support for Display Port tunnels Mika Westerberg
2019-02-07 14:28   ` Andy Shevchenko
2019-02-06 13:17 ` [PATCH v2 22/28] thunderbolt: Run tb_xdp_handle_request() in system workqueue Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 23/28] thunderbolt: Add XDomain UUID exchange support Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 24/28] thunderbolt: Add support for DMA tunnels Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 25/28] thunderbolt: Make tb_switch_alloc() return ERR_PTR() Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 26/28] thunderbolt: Add support for XDomain connections Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 27/28] thunderbolt: Make rest of the logging to happen at debug level Mika Westerberg
2019-02-06 13:17 ` [PATCH v2 28/28] thunderbolt: Start firmware on Titan Ridge Apple systems Mika Westerberg
2019-02-07 14:22 ` Andy Shevchenko [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190207142246.GG9224@smile.fi.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=YehezkelShB@gmail.com \
    --cc=andreas.noever@gmail.com \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=michael.jamet@intel.com \
    --cc=mika.westerberg@linux.intel.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.