Re: [PATCH v1 1/1] dt-binding: iio: remove rst node from NPCM ADC document

[Jonathan Cameron <jic23@kernel.org>]

On Sun, 10 Feb 2019 22:47:49 +0200
Tomer Maimon <tmaimon77@gmail.com> wrote:

> Remove NPCM7xx rst node for preparing the NPCM ADC
> document to describe ADC reset binding.
> 
> Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it. Hopefully just in time
for this cycle as I'll do a final pull request in a day or two.

Thanks,

Jonathan

> ---
>  .../devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt          | 11 -----------
>  1 file changed, 11 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt
> index 1b8132cd9060..eb939fe77836 100644
> --- a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt
> +++ b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt
> @@ -14,11 +14,6 @@ Optional properties:
>  			   vref-supply is not added the ADC will use internal voltage
>  			   reference.
>  
> -Required Node in the NPCM7xx BMC:
> -An additional register is present in the NPCM7xx SOC which is
> -assumed to be in the same device tree, with and marked as
> -compatible with "nuvoton,npcm750-rst".
> -
>  Example:
>  
>  adc: adc@f000c000 {
> @@ -27,9 +22,3 @@ adc: adc@f000c000 {
>  	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
>  	clocks = <&clk NPCM7XX_CLK_ADC>;
>  };
> -
> -rst: rst@f0801000 {
> -	compatible = "nuvoton,npcm750-rst", "syscon",
> -	"simple-mfd";
> -	reg = <0xf0801000 0x6C>;
> -};