[PATCH 0/3] pwm-omap-dmtimer regression fixes

[PATCH 0/3] pwm-omap-dmtimer regression fixes

[Tony Lindgren]

Hi all,

The Pyra handheld PWM LCD regression in v5.0-rc1 reported by Nikolaus
goes back to v4.19 for pwm-omap-dmtimer. Here are patches against v4.19
to fix the issue that also makes pwm-vibra working again for droid 4.

Regards,

Tony


Tony Lindgren (3):
  clocksource: timer-ti-dm: Fix pwm dmtimer usage of fck reparenting
  bus: ti-sysc: Fix timer handling with drop pm_runtime_irq_safe()
  ARM: dts: Configure clock parent for pwm vibra

 arch/arm/boot/dts/omap4-droid4-xt894.dts | 11 +++++++++++
 drivers/bus/ti-sysc.c                    |  4 ++--
 drivers/clocksource/timer-ti-dm.c        |  5 ++++-
 3 files changed, 17 insertions(+), 3 deletions(-)

-- 
2.20.1

[PATCH 0/3] pwm-omap-dmtimer regression fixes

[Tony Lindgren]

Hi all,

The Pyra handheld PWM LCD regression in v5.0-rc1 reported by Nikolaus
goes back to v4.19 for pwm-omap-dmtimer. Here are patches against v4.19
to fix the issue that also makes pwm-vibra working again for droid 4.

Regards,

Tony


Tony Lindgren (3):
  clocksource: timer-ti-dm: Fix pwm dmtimer usage of fck reparenting
  bus: ti-sysc: Fix timer handling with drop pm_runtime_irq_safe()
  ARM: dts: Configure clock parent for pwm vibra

 arch/arm/boot/dts/omap4-droid4-xt894.dts | 11 +++++++++++
 drivers/bus/ti-sysc.c                    |  4 ++--
 drivers/clocksource/timer-ti-dm.c        |  5 ++++-
 3 files changed, 17 insertions(+), 3 deletions(-)

-- 
2.20.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/3] clocksource: timer-ti-dm: Fix pwm dmtimer usage of fck reparenting

[Tony Lindgren]

Commit 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
them with ti-sysc") moved some omap4 timers to probe with ti-sysc
interconnect target module. Turns out this broke pwm-omap-dmtimer
where we now try to reparent the clock to itself with the following:

omap_dm_timer_of_set_source: failed to set parent

With ti-sysc, we can now configure the clock sources in the dts
with assigned-clocks and assigned-clock-parents. So we should be able
to remove omap_dm_timer_of_set_source with clean-up patches later on.
But for now, let's just fix it first by checking if parent and fck
are the same and bail out of so.

Fixes: 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
them with ti-sysc")
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/clocksource/timer-ti-dm.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/clocksource/timer-ti-dm.c b/drivers/clocksource/timer-ti-dm.c
--- a/drivers/clocksource/timer-ti-dm.c
+++ b/drivers/clocksource/timer-ti-dm.c
@@ -154,6 +154,10 @@ static int omap_dm_timer_of_set_source(struct omap_dm_timer *timer)
 	if (IS_ERR(parent))
 		return -ENODEV;
 
+	/* Bail out if both clocks point to fck */
+	if (clk_is_match(parent, timer->fclk))
+		return 0;
+
 	ret = clk_set_parent(timer->fclk, parent);
 	if (ret < 0)
 		pr_err("%s: failed to set parent\n", __func__);
-- 
2.20.1

[PATCH 1/3] clocksource: timer-ti-dm: Fix pwm dmtimer usage of fck reparenting

[Tony Lindgren]

Commit 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
them with ti-sysc") moved some omap4 timers to probe with ti-sysc
interconnect target module. Turns out this broke pwm-omap-dmtimer
where we now try to reparent the clock to itself with the following:

omap_dm_timer_of_set_source: failed to set parent

With ti-sysc, we can now configure the clock sources in the dts
with assigned-clocks and assigned-clock-parents. So we should be able
to remove omap_dm_timer_of_set_source with clean-up patches later on.
But for now, let's just fix it first by checking if parent and fck
are the same and bail out of so.

Fixes: 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
them with ti-sysc")
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/clocksource/timer-ti-dm.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/clocksource/timer-ti-dm.c b/drivers/clocksource/timer-ti-dm.c
--- a/drivers/clocksource/timer-ti-dm.c
+++ b/drivers/clocksource/timer-ti-dm.c
@@ -154,6 +154,10 @@ static int omap_dm_timer_of_set_source(struct omap_dm_timer *timer)
 	if (IS_ERR(parent))
 		return -ENODEV;
 
+	/* Bail out if both clocks point to fck */
+	if (clk_is_match(parent, timer->fclk))
+		return 0;
+
 	ret = clk_set_parent(timer->fclk, parent);
 	if (ret < 0)
 		pr_err("%s: failed to set parent\n", __func__);
-- 
2.20.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/3] clocksource: timer-ti-dm: Fix pwm dmtimer usage of fck reparenting

[Andreas Kemnade]

[-- Attachment #1.1: Type: text/plain, Size: 842 bytes --]

On Tue, 22 Jan 2019 09:57:15 -0800
Tony Lindgren <tony@atomide.com> wrote:

> Commit 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
> them with ti-sysc") moved some omap4 timers to probe with ti-sysc
> interconnect target module. Turns out this broke pwm-omap-dmtimer
> where we now try to reparent the clock to itself with the following:
> 
> omap_dm_timer_of_set_source: failed to set parent
> 
> With ti-sysc, we can now configure the clock sources in the dts
> with assigned-clocks and assigned-clock-parents. So we should be able
> to remove omap_dm_timer_of_set_source with clean-up patches later on.
> But for now, let's just fix it first by checking if parent and fck
> are the same and bail out of so.
> 
together with 2/3 it fixes things on pyra

Tested-By: Andreas Kemnade <andreas@kemnade.info>

[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/3] clocksource: timer-ti-dm: Fix pwm dmtimer usage of fck reparenting

[Andreas Kemnade]

[-- Attachment #1: Type: text/plain, Size: 842 bytes --]

On Tue, 22 Jan 2019 09:57:15 -0800
Tony Lindgren <tony@atomide.com> wrote:

> Commit 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
> them with ti-sysc") moved some omap4 timers to probe with ti-sysc
> interconnect target module. Turns out this broke pwm-omap-dmtimer
> where we now try to reparent the clock to itself with the following:
> 
> omap_dm_timer_of_set_source: failed to set parent
> 
> With ti-sysc, we can now configure the clock sources in the dts
> with assigned-clocks and assigned-clock-parents. So we should be able
> to remove omap_dm_timer_of_set_source with clean-up patches later on.
> But for now, let's just fix it first by checking if parent and fck
> are the same and bail out of so.
> 
together with 2/3 it fixes things on pyra

Tested-By: Andreas Kemnade <andreas@kemnade.info>

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 1/3] clocksource: timer-ti-dm: Fix pwm dmtimer usage of fck reparenting

[H. Nikolaus Schaller]

> Am 26.01.2019 um 19:40 schrieb Andreas Kemnade <andreas@kemnade.info>:
> 
> On Tue, 22 Jan 2019 09:57:15 -0800
> Tony Lindgren <tony@atomide.com> wrote:
> 
>> Commit 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
>> them with ti-sysc") moved some omap4 timers to probe with ti-sysc
>> interconnect target module. Turns out this broke pwm-omap-dmtimer
>> where we now try to reparent the clock to itself with the following:
>> 
>> omap_dm_timer_of_set_source: failed to set parent
>> 
>> With ti-sysc, we can now configure the clock sources in the dts
>> with assigned-clocks and assigned-clock-parents. So we should be able
>> to remove omap_dm_timer_of_set_source with clean-up patches later on.
>> But for now, let's just fix it first by checking if parent and fck
>> are the same and bail out of so.
>> 
> together with 2/3 it fixes things on pyra
> 
> Tested-By: Andreas Kemnade <andreas@kemnade.info>

Tested-By: H. Nikolaus Schaller <hns@goldelico.com>

Re: [PATCH 1/3] clocksource: timer-ti-dm: Fix pwm dmtimer usage of fck reparenting

[H. Nikolaus Schaller]

> Am 26.01.2019 um 19:40 schrieb Andreas Kemnade <andreas@kemnade.info>:
> 
> On Tue, 22 Jan 2019 09:57:15 -0800
> Tony Lindgren <tony@atomide.com> wrote:
> 
>> Commit 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
>> them with ti-sysc") moved some omap4 timers to probe with ti-sysc
>> interconnect target module. Turns out this broke pwm-omap-dmtimer
>> where we now try to reparent the clock to itself with the following:
>> 
>> omap_dm_timer_of_set_source: failed to set parent
>> 
>> With ti-sysc, we can now configure the clock sources in the dts
>> with assigned-clocks and assigned-clock-parents. So we should be able
>> to remove omap_dm_timer_of_set_source with clean-up patches later on.
>> But for now, let's just fix it first by checking if parent and fck
>> are the same and bail out of so.
>> 
> together with 2/3 it fixes things on pyra
> 
> Tested-By: Andreas Kemnade <andreas@kemnade.info>

Tested-By: H. Nikolaus Schaller <hns@goldelico.com>

Re: [PATCH 1/3] clocksource: timer-ti-dm: Fix pwm dmtimer usage of fck reparenting

[H. Nikolaus Schaller]

> Am 26.01.2019 um 19:40 schrieb Andreas Kemnade <andreas@kemnade.info>:
> 
> On Tue, 22 Jan 2019 09:57:15 -0800
> Tony Lindgren <tony@atomide.com> wrote:
> 
>> Commit 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
>> them with ti-sysc") moved some omap4 timers to probe with ti-sysc
>> interconnect target module. Turns out this broke pwm-omap-dmtimer
>> where we now try to reparent the clock to itself with the following:
>> 
>> omap_dm_timer_of_set_source: failed to set parent
>> 
>> With ti-sysc, we can now configure the clock sources in the dts
>> with assigned-clocks and assigned-clock-parents. So we should be able
>> to remove omap_dm_timer_of_set_source with clean-up patches later on.
>> But for now, let's just fix it first by checking if parent and fck
>> are the same and bail out of so.
>> 
> together with 2/3 it fixes things on pyra
> 
> Tested-By: Andreas Kemnade <andreas@kemnade.info>

Tested-By: H. Nikolaus Schaller <hns@goldelico.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/3] clocksource: timer-ti-dm: Fix pwm dmtimer usage of fck reparenting

[Daniel Lezcano]

On 22/01/2019 18:57, Tony Lindgren wrote:
> Commit 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
> them with ti-sysc") moved some omap4 timers to probe with ti-sysc
> interconnect target module. Turns out this broke pwm-omap-dmtimer
> where we now try to reparent the clock to itself with the following:
> 
> omap_dm_timer_of_set_source: failed to set parent
> 
> With ti-sysc, we can now configure the clock sources in the dts
> with assigned-clocks and assigned-clock-parents. So we should be able
> to remove omap_dm_timer_of_set_source with clean-up patches later on.
> But for now, let's just fix it first by checking if parent and fck
> are the same and bail out of so.
> 
> Fixes: 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
> them with ti-sysc")
> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: H. Nikolaus Schaller <hns@goldelico.com>
> Cc: Keerthy <j-keerthy@ti.com>
> Cc: Ladislav Michl <ladis@linux-mips.org>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Sebastian Reichel <sre@kernel.org>
> Cc: Tero Kristo <t-kristo@ti.com>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---

Do you want me to take it through my tree (1 et 3)?

>  drivers/clocksource/timer-ti-dm.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/clocksource/timer-ti-dm.c b/drivers/clocksource/timer-ti-dm.c
> --- a/drivers/clocksource/timer-ti-dm.c
> +++ b/drivers/clocksource/timer-ti-dm.c
> @@ -154,6 +154,10 @@ static int omap_dm_timer_of_set_source(struct omap_dm_timer *timer)
>  	if (IS_ERR(parent))
>  		return -ENODEV;
>  
> +	/* Bail out if both clocks point to fck */
> +	if (clk_is_match(parent, timer->fclk))
> +		return 0;
> +
>  	ret = clk_set_parent(timer->fclk, parent);
>  	if (ret < 0)
>  		pr_err("%s: failed to set parent\n", __func__);
> 


-- 
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Re: [PATCH 1/3] clocksource: timer-ti-dm: Fix pwm dmtimer usage of fck reparenting

[Daniel Lezcano]

On 22/01/2019 18:57, Tony Lindgren wrote:
> Commit 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
> them with ti-sysc") moved some omap4 timers to probe with ti-sysc
> interconnect target module. Turns out this broke pwm-omap-dmtimer
> where we now try to reparent the clock to itself with the following:
> 
> omap_dm_timer_of_set_source: failed to set parent
> 
> With ti-sysc, we can now configure the clock sources in the dts
> with assigned-clocks and assigned-clock-parents. So we should be able
> to remove omap_dm_timer_of_set_source with clean-up patches later on.
> But for now, let's just fix it first by checking if parent and fck
> are the same and bail out of so.
> 
> Fixes: 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
> them with ti-sysc")
> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: H. Nikolaus Schaller <hns@goldelico.com>
> Cc: Keerthy <j-keerthy@ti.com>
> Cc: Ladislav Michl <ladis@linux-mips.org>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Sebastian Reichel <sre@kernel.org>
> Cc: Tero Kristo <t-kristo@ti.com>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---

Do you want me to take it through my tree (1 et 3)?

>  drivers/clocksource/timer-ti-dm.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/clocksource/timer-ti-dm.c b/drivers/clocksource/timer-ti-dm.c
> --- a/drivers/clocksource/timer-ti-dm.c
> +++ b/drivers/clocksource/timer-ti-dm.c
> @@ -154,6 +154,10 @@ static int omap_dm_timer_of_set_source(struct omap_dm_timer *timer)
>  	if (IS_ERR(parent))
>  		return -ENODEV;
>  
> +	/* Bail out if both clocks point to fck */
> +	if (clk_is_match(parent, timer->fclk))
> +		return 0;
> +
>  	ret = clk_set_parent(timer->fclk, parent);
>  	if (ret < 0)
>  		pr_err("%s: failed to set parent\n", __func__);
> 


-- 
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/3] clocksource: timer-ti-dm: Fix pwm dmtimer usage of fck reparenting

[Tony Lindgren]

Hi,

* Daniel Lezcano <daniel.lezcano@linaro.org> [190212 09:08]:
> 
> Do you want me to take it through my tree (1 et 3)?

No need to thanks, I already sent a pull request on them
as "[GIT PULL] omap soc regression fixes for v5.0-rc cycle"
with you in Cc.

Regards,

Tony

Re: [PATCH 1/3] clocksource: timer-ti-dm: Fix pwm dmtimer usage of fck reparenting

[Tony Lindgren]

Hi,

* Daniel Lezcano <daniel.lezcano@linaro.org> [190212 09:08]:
> 
> Do you want me to take it through my tree (1 et 3)?

No need to thanks, I already sent a pull request on them
as "[GIT PULL] omap soc regression fixes for v5.0-rc cycle"
with you in Cc.

Regards,

Tony

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/3] bus: ti-sysc: Fix timer handling with drop pm_runtime_irq_safe()

[Tony Lindgren]

Commit 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
them with ti-sysc") started producing a warning for pwm-omap-dmtimer:

WARNING: CPU: 0 PID: 77 at drivers/bus/omap_l3_noc.c:147
l3_interrupt_handler+0x2f8/0x388
44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4PER2 (Idle):
Data Access in Supervisor mode during Functional access
...
__pm_runtime_idle
omap_dm_timer_disable
pwm_omap_dmtimer_start
pwm_omap_dmtimer_enable
pwm_apply_state
pwm_vibrator_start
pwm_vibrator_play_work

This is because the timer that pwm-omap-dmtimer is using is now being
probed with ti-sysc interconnect target module instead of omap_device
and the ti-sysc quirk for SYSC_QUIRK_LEGACY_IDLE is not fully
compatible with what omap_device has been doing.

We could fix this by reverting the timer changes and have the timer
probe again with omap_device. Or we could add more quirk handling to
ti-sysc driver. But as these options don't work nicely as longer term
solutions, let's just make timers probe with ti-sysc without any
quirks.

To do this, all we need to do is remove quirks for timers for ti-sysc,
and drop the bogus pm_runtime_irq_safe() flag for timer-ti-dm.

We should not use pm_runtime_irq_safe() anyways for drivers as it will
take a permanent use count on the parent device blocking the parent
devices from idling and has been forcing ti-sysc driver to use a
quirk flag.

Note that we will move the timer data to DEBUG section later on in
clean-up patches.

Fixes: 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
them with ti-sysc")
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/bus/ti-sysc.c             | 4 ++--
 drivers/clocksource/timer-ti-dm.c | 1 -
 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -879,10 +879,10 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 	SYSC_QUIRK("smartreflex", 0, -1, 0x38, -1, 0x00000000, 0xffffffff,
 		   SYSC_QUIRK_LEGACY_IDLE),
 	SYSC_QUIRK("timer", 0, 0, 0x10, 0x14, 0x00000015, 0xffffffff,
-		   SYSC_QUIRK_LEGACY_IDLE),
+		   0),
 	/* Some timers on omap4 and later */
 	SYSC_QUIRK("timer", 0, 0, 0x10, -1, 0x4fff1301, 0xffffffff,
-		   SYSC_QUIRK_LEGACY_IDLE),
+		   0),
 	SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000052, 0xffffffff,
 		   SYSC_QUIRK_LEGACY_IDLE),
 	/* Uarts on omap4 and later */
diff --git a/drivers/clocksource/timer-ti-dm.c b/drivers/clocksource/timer-ti-dm.c
--- a/drivers/clocksource/timer-ti-dm.c
+++ b/drivers/clocksource/timer-ti-dm.c
@@ -868,7 +868,6 @@ static int omap_dm_timer_probe(struct platform_device *pdev)
 	timer->pdev = pdev;
 
 	pm_runtime_enable(dev);
-	pm_runtime_irq_safe(dev);
 
 	if (!timer->reserved) {
 		ret = pm_runtime_get_sync(dev);
-- 
2.20.1

[PATCH 2/3] bus: ti-sysc: Fix timer handling with drop pm_runtime_irq_safe()

[Tony Lindgren]

Commit 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
them with ti-sysc") started producing a warning for pwm-omap-dmtimer:

WARNING: CPU: 0 PID: 77 at drivers/bus/omap_l3_noc.c:147
l3_interrupt_handler+0x2f8/0x388
44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4PER2 (Idle):
Data Access in Supervisor mode during Functional access
...
__pm_runtime_idle
omap_dm_timer_disable
pwm_omap_dmtimer_start
pwm_omap_dmtimer_enable
pwm_apply_state
pwm_vibrator_start
pwm_vibrator_play_work

This is because the timer that pwm-omap-dmtimer is using is now being
probed with ti-sysc interconnect target module instead of omap_device
and the ti-sysc quirk for SYSC_QUIRK_LEGACY_IDLE is not fully
compatible with what omap_device has been doing.

We could fix this by reverting the timer changes and have the timer
probe again with omap_device. Or we could add more quirk handling to
ti-sysc driver. But as these options don't work nicely as longer term
solutions, let's just make timers probe with ti-sysc without any
quirks.

To do this, all we need to do is remove quirks for timers for ti-sysc,
and drop the bogus pm_runtime_irq_safe() flag for timer-ti-dm.

We should not use pm_runtime_irq_safe() anyways for drivers as it will
take a permanent use count on the parent device blocking the parent
devices from idling and has been forcing ti-sysc driver to use a
quirk flag.

Note that we will move the timer data to DEBUG section later on in
clean-up patches.

Fixes: 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
them with ti-sysc")
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/bus/ti-sysc.c             | 4 ++--
 drivers/clocksource/timer-ti-dm.c | 1 -
 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -879,10 +879,10 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 	SYSC_QUIRK("smartreflex", 0, -1, 0x38, -1, 0x00000000, 0xffffffff,
 		   SYSC_QUIRK_LEGACY_IDLE),
 	SYSC_QUIRK("timer", 0, 0, 0x10, 0x14, 0x00000015, 0xffffffff,
-		   SYSC_QUIRK_LEGACY_IDLE),
+		   0),
 	/* Some timers on omap4 and later */
 	SYSC_QUIRK("timer", 0, 0, 0x10, -1, 0x4fff1301, 0xffffffff,
-		   SYSC_QUIRK_LEGACY_IDLE),
+		   0),
 	SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000052, 0xffffffff,
 		   SYSC_QUIRK_LEGACY_IDLE),
 	/* Uarts on omap4 and later */
diff --git a/drivers/clocksource/timer-ti-dm.c b/drivers/clocksource/timer-ti-dm.c
--- a/drivers/clocksource/timer-ti-dm.c
+++ b/drivers/clocksource/timer-ti-dm.c
@@ -868,7 +868,6 @@ static int omap_dm_timer_probe(struct platform_device *pdev)
 	timer->pdev = pdev;
 
 	pm_runtime_enable(dev);
-	pm_runtime_irq_safe(dev);
 
 	if (!timer->reserved) {
 		ret = pm_runtime_get_sync(dev);
-- 
2.20.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/3] bus: ti-sysc: Fix timer handling with drop pm_runtime_irq_safe()

[Andreas Kemnade]

[-- Attachment #1.1: Type: text/plain, Size: 1761 bytes --]

On Tue, 22 Jan 2019 09:57:16 -0800
Tony Lindgren <tony@atomide.com> wrote:

> Commit 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
> them with ti-sysc") started producing a warning for pwm-omap-dmtimer:
> 
> WARNING: CPU: 0 PID: 77 at drivers/bus/omap_l3_noc.c:147
> l3_interrupt_handler+0x2f8/0x388
> 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4PER2 (Idle):
> Data Access in Supervisor mode during Functional access
> ...
> __pm_runtime_idle
> omap_dm_timer_disable
> pwm_omap_dmtimer_start
> pwm_omap_dmtimer_enable
> pwm_apply_state
> pwm_vibrator_start
> pwm_vibrator_play_work
> 
> This is because the timer that pwm-omap-dmtimer is using is now being
> probed with ti-sysc interconnect target module instead of omap_device
> and the ti-sysc quirk for SYSC_QUIRK_LEGACY_IDLE is not fully
> compatible with what omap_device has been doing.
> 
> We could fix this by reverting the timer changes and have the timer
> probe again with omap_device. Or we could add more quirk handling to
> ti-sysc driver. But as these options don't work nicely as longer term
> solutions, let's just make timers probe with ti-sysc without any
> quirks.
> 
> To do this, all we need to do is remove quirks for timers for ti-sysc,
> and drop the bogus pm_runtime_irq_safe() flag for timer-ti-dm.
> 
> We should not use pm_runtime_irq_safe() anyways for drivers as it will
> take a permanent use count on the parent device blocking the parent
> devices from idling and has been forcing ti-sysc driver to use a
> quirk flag.
> 
> Note that we will move the timer data to DEBUG section later on in
> clean-up patches.
> 
together with 1/3 it fixes things on pyra.

Tested-By: Andreas Kemnade <andreas@kemnade.info>

[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/3] bus: ti-sysc: Fix timer handling with drop pm_runtime_irq_safe()

[Andreas Kemnade]

[-- Attachment #1: Type: text/plain, Size: 1761 bytes --]

On Tue, 22 Jan 2019 09:57:16 -0800
Tony Lindgren <tony@atomide.com> wrote:

> Commit 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
> them with ti-sysc") started producing a warning for pwm-omap-dmtimer:
> 
> WARNING: CPU: 0 PID: 77 at drivers/bus/omap_l3_noc.c:147
> l3_interrupt_handler+0x2f8/0x388
> 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4PER2 (Idle):
> Data Access in Supervisor mode during Functional access
> ...
> __pm_runtime_idle
> omap_dm_timer_disable
> pwm_omap_dmtimer_start
> pwm_omap_dmtimer_enable
> pwm_apply_state
> pwm_vibrator_start
> pwm_vibrator_play_work
> 
> This is because the timer that pwm-omap-dmtimer is using is now being
> probed with ti-sysc interconnect target module instead of omap_device
> and the ti-sysc quirk for SYSC_QUIRK_LEGACY_IDLE is not fully
> compatible with what omap_device has been doing.
> 
> We could fix this by reverting the timer changes and have the timer
> probe again with omap_device. Or we could add more quirk handling to
> ti-sysc driver. But as these options don't work nicely as longer term
> solutions, let's just make timers probe with ti-sysc without any
> quirks.
> 
> To do this, all we need to do is remove quirks for timers for ti-sysc,
> and drop the bogus pm_runtime_irq_safe() flag for timer-ti-dm.
> 
> We should not use pm_runtime_irq_safe() anyways for drivers as it will
> take a permanent use count on the parent device blocking the parent
> devices from idling and has been forcing ti-sysc driver to use a
> quirk flag.
> 
> Note that we will move the timer data to DEBUG section later on in
> clean-up patches.
> 
together with 1/3 it fixes things on pyra.

Tested-By: Andreas Kemnade <andreas@kemnade.info>

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 2/3] bus: ti-sysc: Fix timer handling with drop pm_runtime_irq_safe()

[H. Nikolaus Schaller]

> Am 26.01.2019 um 19:41 schrieb Andreas Kemnade <andreas@kemnade.info>:
> 
> On Tue, 22 Jan 2019 09:57:16 -0800
> Tony Lindgren <tony@atomide.com> wrote:
> 
>> Commit 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
>> them with ti-sysc") started producing a warning for pwm-omap-dmtimer:
>> 
>> WARNING: CPU: 0 PID: 77 at drivers/bus/omap_l3_noc.c:147
>> l3_interrupt_handler+0x2f8/0x388
>> 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4PER2 (Idle):
>> Data Access in Supervisor mode during Functional access
>> ...
>> __pm_runtime_idle
>> omap_dm_timer_disable
>> pwm_omap_dmtimer_start
>> pwm_omap_dmtimer_enable
>> pwm_apply_state
>> pwm_vibrator_start
>> pwm_vibrator_play_work
>> 
>> This is because the timer that pwm-omap-dmtimer is using is now being
>> probed with ti-sysc interconnect target module instead of omap_device
>> and the ti-sysc quirk for SYSC_QUIRK_LEGACY_IDLE is not fully
>> compatible with what omap_device has been doing.
>> 
>> We could fix this by reverting the timer changes and have the timer
>> probe again with omap_device. Or we could add more quirk handling to
>> ti-sysc driver. But as these options don't work nicely as longer term
>> solutions, let's just make timers probe with ti-sysc without any
>> quirks.
>> 
>> To do this, all we need to do is remove quirks for timers for ti-sysc,
>> and drop the bogus pm_runtime_irq_safe() flag for timer-ti-dm.
>> 
>> We should not use pm_runtime_irq_safe() anyways for drivers as it will
>> take a permanent use count on the parent device blocking the parent
>> devices from idling and has been forcing ti-sysc driver to use a
>> quirk flag.
>> 
>> Note that we will move the timer data to DEBUG section later on in
>> clean-up patches.
>> 
> together with 1/3 it fixes things on pyra.
> 
> Tested-By: Andreas Kemnade <andreas@kemnade.info>

H. Nikolaus Schaller <hns@goldelico.com>

Re: [PATCH 2/3] bus: ti-sysc: Fix timer handling with drop pm_runtime_irq_safe()

[H. Nikolaus Schaller]

> Am 26.01.2019 um 19:41 schrieb Andreas Kemnade <andreas@kemnade.info>:
> 
> On Tue, 22 Jan 2019 09:57:16 -0800
> Tony Lindgren <tony@atomide.com> wrote:
> 
>> Commit 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
>> them with ti-sysc") started producing a warning for pwm-omap-dmtimer:
>> 
>> WARNING: CPU: 0 PID: 77 at drivers/bus/omap_l3_noc.c:147
>> l3_interrupt_handler+0x2f8/0x388
>> 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4PER2 (Idle):
>> Data Access in Supervisor mode during Functional access
>> ...
>> __pm_runtime_idle
>> omap_dm_timer_disable
>> pwm_omap_dmtimer_start
>> pwm_omap_dmtimer_enable
>> pwm_apply_state
>> pwm_vibrator_start
>> pwm_vibrator_play_work
>> 
>> This is because the timer that pwm-omap-dmtimer is using is now being
>> probed with ti-sysc interconnect target module instead of omap_device
>> and the ti-sysc quirk for SYSC_QUIRK_LEGACY_IDLE is not fully
>> compatible with what omap_device has been doing.
>> 
>> We could fix this by reverting the timer changes and have the timer
>> probe again with omap_device. Or we could add more quirk handling to
>> ti-sysc driver. But as these options don't work nicely as longer term
>> solutions, let's just make timers probe with ti-sysc without any
>> quirks.
>> 
>> To do this, all we need to do is remove quirks for timers for ti-sysc,
>> and drop the bogus pm_runtime_irq_safe() flag for timer-ti-dm.
>> 
>> We should not use pm_runtime_irq_safe() anyways for drivers as it will
>> take a permanent use count on the parent device blocking the parent
>> devices from idling and has been forcing ti-sysc driver to use a
>> quirk flag.
>> 
>> Note that we will move the timer data to DEBUG section later on in
>> clean-up patches.
>> 
> together with 1/3 it fixes things on pyra.
> 
> Tested-By: Andreas Kemnade <andreas@kemnade.info>

H. Nikolaus Schaller <hns@goldelico.com>

Re: [PATCH 2/3] bus: ti-sysc: Fix timer handling with drop pm_runtime_irq_safe()

[H. Nikolaus Schaller]

> Am 26.01.2019 um 19:41 schrieb Andreas Kemnade <andreas@kemnade.info>:
> 
> On Tue, 22 Jan 2019 09:57:16 -0800
> Tony Lindgren <tony@atomide.com> wrote:
> 
>> Commit 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
>> them with ti-sysc") started producing a warning for pwm-omap-dmtimer:
>> 
>> WARNING: CPU: 0 PID: 77 at drivers/bus/omap_l3_noc.c:147
>> l3_interrupt_handler+0x2f8/0x388
>> 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4PER2 (Idle):
>> Data Access in Supervisor mode during Functional access
>> ...
>> __pm_runtime_idle
>> omap_dm_timer_disable
>> pwm_omap_dmtimer_start
>> pwm_omap_dmtimer_enable
>> pwm_apply_state
>> pwm_vibrator_start
>> pwm_vibrator_play_work
>> 
>> This is because the timer that pwm-omap-dmtimer is using is now being
>> probed with ti-sysc interconnect target module instead of omap_device
>> and the ti-sysc quirk for SYSC_QUIRK_LEGACY_IDLE is not fully
>> compatible with what omap_device has been doing.
>> 
>> We could fix this by reverting the timer changes and have the timer
>> probe again with omap_device. Or we could add more quirk handling to
>> ti-sysc driver. But as these options don't work nicely as longer term
>> solutions, let's just make timers probe with ti-sysc without any
>> quirks.
>> 
>> To do this, all we need to do is remove quirks for timers for ti-sysc,
>> and drop the bogus pm_runtime_irq_safe() flag for timer-ti-dm.
>> 
>> We should not use pm_runtime_irq_safe() anyways for drivers as it will
>> take a permanent use count on the parent device blocking the parent
>> devices from idling and has been forcing ti-sysc driver to use a
>> quirk flag.
>> 
>> Note that we will move the timer data to DEBUG section later on in
>> clean-up patches.
>> 
> together with 1/3 it fixes things on pyra.
> 
> Tested-By: Andreas Kemnade <andreas@kemnade.info>

H. Nikolaus Schaller <hns@goldelico.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 3/3] ARM: dts: Configure clock parent for pwm vibra

[Tony Lindgren]

Commit 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
them with ti-sysc") moved some omap4 timers to probe with ti-sysc
interconnect target module. Turns out this broke pwm-omap-dmtimer
for reparenting of the timer clock.

With ti-sysc, we can now configure the clock sources in the dts with
assigned-clocks and assigned-clock-parents.

Fixes: 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
them with ti-sysc")
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap4-droid4-xt894.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -644,6 +644,17 @@
 	};
 };
 
+/* Configure pwm clock source for timers 8 & 9 */
+&timer8 {
+	assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
+	assigned-clock-parents = <&sys_clkin_ck>;
+};
+
+&timer9 {
+	assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
+	assigned-clock-parents = <&sys_clkin_ck>;
+};
+
 /*
  * As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for
  * uart1 wakeirq.
-- 
2.20.1

[PATCH 3/3] ARM: dts: Configure clock parent for pwm vibra

[Tony Lindgren]

Commit 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
them with ti-sysc") moved some omap4 timers to probe with ti-sysc
interconnect target module. Turns out this broke pwm-omap-dmtimer
for reparenting of the timer clock.

With ti-sysc, we can now configure the clock sources in the dts with
assigned-clocks and assigned-clock-parents.

Fixes: 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
them with ti-sysc")
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/omap4-droid4-xt894.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -644,6 +644,17 @@
 	};
 };
 
+/* Configure pwm clock source for timers 8 & 9 */
+&timer8 {
+	assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
+	assigned-clock-parents = <&sys_clkin_ck>;
+};
+
+&timer9 {
+	assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
+	assigned-clock-parents = <&sys_clkin_ck>;
+};
+
 /*
  * As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for
  * uart1 wakeirq.
-- 
2.20.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel