From: Brian Foster <bfoster@redhat.com>
To: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: guaneryu@gmail.com, linux-xfs@vger.kernel.org, fstests@vger.kernel.org
Subject: Re: [PATCH 2/2] generic: check the behavior of programs opening a lot of O_TMPFILE files
Date: Wed, 13 Feb 2019 10:44:15 -0500 [thread overview]
Message-ID: <20190213154415.GD42812@bfoster> (raw)
In-Reply-To: <20190213051142.GC32253@magnolia>
On Tue, Feb 12, 2019 at 09:11:42PM -0800, Darrick J. Wong wrote:
> On Tue, Feb 12, 2019 at 08:51:19PM -0800, Darrick J. Wong wrote:
> > On Tue, Feb 12, 2019 at 09:04:36AM -0500, Brian Foster wrote:
> > > On Mon, Feb 11, 2019 at 06:17:54PM -0800, Darrick J. Wong wrote:
> > > > From: Darrick J. Wong <darrick.wong@oracle.com>
> > > >
> > > > Create a test (+ helper program) that opens as many unlinked files as it
> > > > possibly can on the scratch filesystem, then closes all the files at
> > > > once to stress-test unlinked file cleanup. Add an xfs-specific test to
> > > > make sure that the fallback code doesn't bitrot.
> > > >
> > > > Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
> > > > ---
> > > > src/Makefile | 2 -
> > > > src/tmpfile.c | 127 +++++++++++++++++++++++++++++++++++++++++++++++++
> > > > tests/generic/710 | 65 +++++++++++++++++++++++++
> > > > tests/generic/710.out | 2 +
> > > > tests/generic/711 | 73 ++++++++++++++++++++++++++++
> > > > tests/generic/711.out | 2 +
> > > > tests/generic/group | 2 +
> > > > tests/xfs/736 | 71 +++++++++++++++++++++++++++
> > > > tests/xfs/736.out | 2 +
> > > > tests/xfs/737 | 79 ++++++++++++++++++++++++++++++
> > > > tests/xfs/737.out | 2 +
> > > > tests/xfs/group | 2 +
> > > > 12 files changed, 428 insertions(+), 1 deletion(-)
> > > > create mode 100644 src/tmpfile.c
> > > > create mode 100755 tests/generic/710
> > > > create mode 100644 tests/generic/710.out
> > > > create mode 100755 tests/generic/711
> > > > create mode 100644 tests/generic/711.out
> > > > create mode 100755 tests/xfs/736
> > > > create mode 100644 tests/xfs/736.out
> > > > create mode 100755 tests/xfs/737
> > > > create mode 100644 tests/xfs/737.out
> > > >
> > > >
...
> >
> > > I'm wondering if we should have a log recovery test as well, btw.
> >
> > Yes. I'll turn g/710 and x/736 into the log recovery tests.
> >
> > (Oh wow flood of asserts this is going to take a while to straighten
> > out)
>
> NFI what this is about, but here's the crash:
>
> XFS: Assertion failed: VFS_I(ip)->i_nlink == 0, file: fs/xfs/xfs_log_recover.c, line: 5072
Heh, we somehow end up with (what looks like) a linked inode on the
unlinked list..?
Brian
> WARNING: CPU: 0 PID: 2936 at fs/xfs/xfs_message.c:104 assfail+0x27/0x2a [xfs]
> Modules linked in: xfs libcrc32c bfq dax_pmem nd_pmem device_dax sch_fq_codel ip_tables x_tables nfsv4 af_packet
> CPU: 0 PID: 2936 Comm: mount Tainted: G W 4.20.0-rc6-djw #rc6
> Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1 04/01/2014
> RIP: 0010:assfail+0x27/0x2a [xfs]
> Code: 0f 0b c3 0f 1f 44 00 00 48 89 f1 41 89 d0 48 c7 c6 50 aa 34 a0 48 89 fa 31 ff e8 6d f9 ff ff 80 3d 9c 58 0a 00 00 74 02 0f 0b <0f> 0b c3 48 8b b3 a8 02 00 00 48 c7 c7 c8 ae 34 a0 c6 05 08 54 0a
> RSP: 0018:ffffc90003607c90 EFLAGS: 00010246
> RAX: 0000000000000000 RBX: ffff88802f763a80 RCX: 0000000000000000
> RDX: 00000000ffffffc0 RSI: 000000000000000a RDI: ffffffffa033ce6f
> RBP: ffff88802f763c50 R08: 0000000000000000 R09: 0000000000000000
> R10: 000000000000000a R11: f000000000000000 R12: 0000000000000000
> R13: 0000000000000000 R14: ffff88803d6b5000 R15: 0000000000000000
> FS: 00007f67fe2ea080(0000) GS:ffff88803e800000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 000055ac0c1ec1d8 CR3: 000000003d47e006 CR4: 00000000001606b0
> Call Trace:
> xlog_recover_process_one_iunlink+0x15e/0x170 [xfs]
> xlog_recover_process_iunlinks.isra.50+0x7c/0xc0 [xfs]
> xlog_recover_finish+0x33/0xa0 [xfs]
> xfs_log_mount_finish+0x5f/0x100 [xfs]
> xfs_mountfs+0x568/0x990 [xfs]
> ? xfs_mru_cache_create+0x172/0x1d0 [xfs]
> xfs_fs_fill_super+0x4d1/0x6d0 [xfs]
> ? xfs_test_remount_options+0x60/0x60 [xfs]
> mount_bdev+0x17f/0x1b0
> mount_fs+0x15/0x7d
> vfs_kern_mount.part.43+0x54/0x160
> do_mount+0x1d2/0xd90
> ? memdup_user+0x4b/0x70
> ksys_mount+0xba/0xd0
> __x64_sys_mount+0x21/0x30
> do_syscall_64+0x50/0x160
> entry_SYSCALL_64_after_hwframe+0x49/0xbe
> RIP: 0033:0x7f67fdbad3ca
> Code: 48 8b 0d c1 8a 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 8e 8a 2c 00 f7 d8 64 89 01 48
> RSP: 002b:00007fff05981278 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5
> RAX: ffffffffffffffda RBX: 000055ac0c1e4a40 RCX: 00007f67fdbad3ca
> RDX: 000055ac0c1ebd90 RSI: 000055ac0c1e4c40 RDI: 000055ac0c1e4c20
> RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
> R10: 00000000c0ed0000 R11: 0000000000000206 R12: 000055ac0c1e4c20
> R13: 000055ac0c1ebd90 R14: 0000000000000000 R15: 00007f67fe0ce8a4
> irq event stamp: 60960
> hardirqs last enabled at (60959): [<ffffffff810cac15>] console_unlock+0x435/0x5e0
> hardirqs last disabled at (60960): [<ffffffff81001ba0>] trace_hardirqs_off_thunk+0x1a/0x1c
> softirqs last enabled at (60956): [<ffffffff81a003a8>] __do_softirq+0x3a8/0x4bd
> softirqs last disabled at (60943): [<ffffffff8106166c>] irq_exit+0xbc/0xe0
> ---[ end trace f0ce4aa6d3ed581f ]---
>
> <over and over and over>
>
> XFS (pmem4): xfs_do_force_shutdown(0x8) called from line 368 of file fs/xfs/xfs_trans.c. Return address = ffffffffa02edf93
> XFS (pmem4): Corruption of in-memory data detected. Shutting down filesystem
> XFS (pmem4): Please unmount the filesystem and rectify the problem(s)
> XFS (pmem4): xfs_imap_to_bp: xfs_trans_read_buf() returned error -5.
> XFS (pmem4): xlog_recover_clear_agi_bucket: failed to clear agi 0. Continuing.
>
> <over and over and over>
>
> Reproduces on scsi disk too. Nightnight.
>
> --D
>
> > > > +for i in $(seq 1 $nr_cpus); do
> > > > + wait
> > > > +done
> > >
> > > Can't we just pass the pids forked by the loop above? Though the manpage
> > > says wait should wait for all child pids as it is, so perhaps the loop
> > > is unnecessary?
> >
> > Oh, I did not know that. Thanks for the review!
> >
> > > Brian
> > >
> > > > +
> > > > +# Unmount to prove that we can clean it all
> > > > +echo umount >> $seqres.full
> > > > +before=$(date +%s)
> > > > +_scratch_unmount
> > > > +after=$(date +%s)
> > > > +echo "Unmount took $((after - before))s." >> $seqres.full
> > > > +
> > > > +# Mount so that we can run the usual checks
> > > > +echo silence is golden
> > > > +_scratch_mount
> > > > +status=0
> > > > +exit
> > > > diff --git a/tests/generic/711.out b/tests/generic/711.out
> > > > new file mode 100644
> > > > index 00000000..cbbe36e9
> > > > --- /dev/null
> > > > +++ b/tests/generic/711.out
> > > > @@ -0,0 +1,2 @@
> > > > +QA output created by 711
> > > > +silence is golden
> > > > diff --git a/tests/generic/group b/tests/generic/group
> > > > index f56eb475..26999ca1 100644
> > > > --- a/tests/generic/group
> > > > +++ b/tests/generic/group
> > > > @@ -529,3 +529,5 @@
> > > > 524 auto quick
> > > > 525 auto quick rw
> > > > 709 auto quick
> > > > +710 auto quick unlink
> > > > +711 auto quick unlink
> > > > diff --git a/tests/xfs/736 b/tests/xfs/736
> > > > new file mode 100755
> > > > index 00000000..e33de0ae
> > > > --- /dev/null
> > > > +++ b/tests/xfs/736
> > > > @@ -0,0 +1,71 @@
> > > > +#! /bin/bash
> > > > +# SPDX-License-Identifier: GPL-2.0+
> > > > +# Copyright (c) 2019 Oracle, Inc. All Rights Reserved.
> > > > +#
> > > > +# FS QA Test No. 736
> > > > +#
> > > > +# Stress test creating a lot of unlinked O_TMPFILE files and closing them
> > > > +# all at once, checking that we don't blow up the filesystem. This is sort
> > > > +# of a performance test for the xfs unlinked inode backref patchset, but it
> > > > +# applies to most other filesystems.
> > > > +#
> > > > +# Here we force the use of the slow iunlink bucket walk code in a single
> > > > +# threaded situation.
> > > > +#
> > > > +seq=`basename $0`
> > > > +seqres=$RESULT_DIR/$seq
> > > > +echo "QA output created by $seq"
> > > > +tmp=/tmp/$$
> > > > +status=1 # failure is the default!
> > > > +testfile=$TEST_DIR/$seq.txt
> > > > +trap "_cleanup; exit \$status" 0 1 2 3 15
> > > > +
> > > > +_cleanup()
> > > > +{
> > > > + cd /
> > > > + rm -f $tmp.*
> > > > +}
> > > > +
> > > > +# get standard environment, filters and checks
> > > > +. ./common/rc
> > > > +. ./common/attr
> > > > +. ./common/filter
> > > > +. ./common/inject
> > > > +
> > > > +# real QA test starts here
> > > > +_supported_fs generic
> > > > +_supported_os Linux
> > > > +_require_xfs_io_error_injection "iunlink_fallback"
> > > > +_require_scratch
> > > > +
> > > > +rm -f $seqres.full
> > > > +_scratch_mkfs >> $seqres.full 2>&1
> > > > +_scratch_mount
> > > > +
> > > > +# Set ULIMIT_NOFILE to min(file-max, 30000 files per LOAD_FACTOR)
> > > > +# so that this test doesn't take forever or OOM the box
> > > > +max_files=$((30000 * LOAD_FACTOR))
> > > > +max_allowable_files=$(cat /proc/sys/fs/file-max)
> > > > +test $max_files -gt $max_allowable_files && max_files=$max_allowable_files
> > > > +ulimit -n $max_files
> > > > +
> > > > +# Force xfs to use the iunlinked fallback 50% of the time
> > > > +_scratch_inject_error "iunlink_fallback" "2"
> > > > +
> > > > +# Open a lot of unlinked files
> > > > +echo create >> $seqres.full
> > > > +program=$PWD/src/tmpfile
> > > > +(cd $SCRATCH_MNT ; $program >> $seqres.full)
> > > > +
> > > > +# Unmount to prove that we can clean it all
> > > > +echo umount >> $seqres.full
> > > > +before=$(date +%s)
> > > > +_scratch_unmount
> > > > +after=$(date +%s)
> > > > +echo "Unmount took $((after - before))s." >> $seqres.full
> > > > +
> > > > +# Mount so that we can run the usual checks
> > > > +echo silence is golden
> > > > +_scratch_mount
> > > > +status=0
> > > > +exit
> > > > diff --git a/tests/xfs/736.out b/tests/xfs/736.out
> > > > new file mode 100644
> > > > index 00000000..0258a248
> > > > --- /dev/null
> > > > +++ b/tests/xfs/736.out
> > > > @@ -0,0 +1,2 @@
> > > > +QA output created by 736
> > > > +silence is golden
> > > > diff --git a/tests/xfs/737 b/tests/xfs/737
> > > > new file mode 100755
> > > > index 00000000..47e65607
> > > > --- /dev/null
> > > > +++ b/tests/xfs/737
> > > > @@ -0,0 +1,79 @@
> > > > +#! /bin/bash
> > > > +# SPDX-License-Identifier: GPL-2.0+
> > > > +# Copyright (c) 2019 Oracle, Inc. All Rights Reserved.
> > > > +#
> > > > +# FS QA Test No. 737
> > > > +#
> > > > +# Stress test creating a lot of unlinked O_TMPFILE files and closing them
> > > > +# all at once, checking that we don't blow up the filesystem. This is sort
> > > > +# of a performance test for the xfs unlinked inode backref patchset, but it
> > > > +# applies to most other filesystems.
> > > > +#
> > > > +# Here we force the use of the slow iunlink bucket walk code, using every
> > > > +# CPU possible.
> > > > +#
> > > > +seq=`basename $0`
> > > > +seqres=$RESULT_DIR/$seq
> > > > +echo "QA output created by $seq"
> > > > +tmp=/tmp/$$
> > > > +status=1 # failure is the default!
> > > > +testfile=$TEST_DIR/$seq.txt
> > > > +trap "_cleanup; exit \$status" 0 1 2 3 15
> > > > +
> > > > +_cleanup()
> > > > +{
> > > > + cd /
> > > > + rm -f $tmp.*
> > > > +}
> > > > +
> > > > +# get standard environment, filters and checks
> > > > +. ./common/rc
> > > > +. ./common/attr
> > > > +. ./common/filter
> > > > +. ./common/inject
> > > > +
> > > > +# real QA test starts here
> > > > +_supported_fs generic
> > > > +_supported_os Linux
> > > > +_require_xfs_io_error_injection "iunlink_fallback"
> > > > +_require_scratch
> > > > +
> > > > +rm -f $seqres.full
> > > > +_scratch_mkfs >> $seqres.full 2>&1
> > > > +_scratch_mount
> > > > +
> > > > +# Load up all the CPUs, two threads per CPU.
> > > > +nr_cpus=$(( $(getconf _NPROCESSORS_ONLN) * 2 ))
> > > > +
> > > > +# Set ULIMIT_NOFILE to min(file-max, 30000 files per cpu per LOAD_FACTOR)
> > > > +# so that this test doesn't take forever or OOM the box
> > > > +max_files=$((30000 * LOAD_FACTOR))
> > > > +max_allowable_files=$(( $(cat /proc/sys/fs/file-max) / nr_cpus ))
> > > > +test $max_files -gt $max_allowable_files && max_files=$max_allowable_files
> > > > +ulimit -n $max_files
> > > > +
> > > > +# Force xfs to use the iunlinked fallback 50% of the time
> > > > +_scratch_inject_error "iunlink_fallback" "2"
> > > > +
> > > > +# Open a lot of unlinked files
> > > > +echo create >> $seqres.full
> > > > +program=$PWD/src/tmpfile
> > > > +for i in $(seq 1 $nr_cpus); do
> > > > + (mkdir $SCRATCH_MNT/$i ; cd $SCRATCH_MNT/$i ; $program >> $seqres.full) &
> > > > +done
> > > > +for i in $(seq 1 $nr_cpus); do
> > > > + wait
> > > > +done
> > > > +
> > > > +# Unmount to prove that we can clean it all
> > > > +echo umount >> $seqres.full
> > > > +before=$(date +%s)
> > > > +_scratch_unmount
> > > > +after=$(date +%s)
> > > > +echo "Unmount took $((after - before))s." >> $seqres.full
> > > > +
> > > > +# Mount so that we can run the usual checks
> > > > +echo silence is golden
> > > > +_scratch_mount
> > > > +status=0
> > > > +exit
> > > > diff --git a/tests/xfs/737.out b/tests/xfs/737.out
> > > > new file mode 100644
> > > > index 00000000..bdc4966d
> > > > --- /dev/null
> > > > +++ b/tests/xfs/737.out
> > > > @@ -0,0 +1,2 @@
> > > > +QA output created by 737
> > > > +silence is golden
> > > > diff --git a/tests/xfs/group b/tests/xfs/group
> > > > index 7b7d69f1..d3189cd5 100644
> > > > --- a/tests/xfs/group
> > > > +++ b/tests/xfs/group
> > > > @@ -497,3 +497,5 @@
> > > > 497 dangerous_fuzzers dangerous_scrub dangerous_online_repair
> > > > 498 dangerous_fuzzers dangerous_norepair
> > > > 499 auto quick
> > > > +736 auto quick unlink
> > > > +737 auto quick unlink
> > > >
next prev parent reply other threads:[~2019-02-13 15:44 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-12 2:17 [PATCH 0/2] fstests: incore unlinked list Darrick J. Wong
2019-02-12 2:17 ` [PATCH 1/2] inject: skip tests when knob dir exists but knob doesn't Darrick J. Wong
2019-02-12 14:03 ` Brian Foster
2019-02-12 2:17 ` [PATCH 2/2] generic: check the behavior of programs opening a lot of O_TMPFILE files Darrick J. Wong
2019-02-12 2:42 ` Amir Goldstein
2019-02-13 4:33 ` Darrick J. Wong
2019-02-12 14:04 ` Brian Foster
2019-02-13 4:51 ` Darrick J. Wong
2019-02-13 5:11 ` Darrick J. Wong
2019-02-13 15:44 ` Brian Foster [this message]
2019-02-13 15:44 ` Brian Foster
2019-02-13 16:20 ` Darrick J. Wong
2019-02-13 16:36 ` Brian Foster
2019-02-13 20:49 ` [PATCH v2 " Darrick J. Wong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190213154415.GD42812@bfoster \
--to=bfoster@redhat.com \
--cc=darrick.wong@oracle.com \
--cc=fstests@vger.kernel.org \
--cc=guaneryu@gmail.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.