[U-Boot] Kernel hang when replace older uboot with uboot master V2

[Lukasz Majewski <lukma@denx.de>]

On Tue, 19 Feb 2019 17:30:57 +0800
"rosysong at rosinson.com" <rosysong@rosinson.com> wrote:

> Hi all, 
>     And When I turn off the log, its bootlog like this:
> 
> U-Boot 2019.01-00079-g3420a6fc6e-dirty (Feb 19 2019 - 17:19:16 +0800)
> 
> Qualcomm Atheros QCA9561 ver 1 rev 0
> Model: AP152 Reference Board
> DRAM:  128 MiB
> Loading Environment from SPI Flash... SF: Detected w25q128bv with
> page size 256 Bytes, erase size 4 KiB, total 16 MiB, mapped at
> 9f000000 *** Warning - bad CRC, using default environment

Here is the culprit - the on-board (tuned, setup) envs are not
accessible (or read in a wrong way).

Apparently the default envs doesn't have proper root=... setup.

Please check the env related entries in Kconfig.


Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190219/51e4e19c/attachment.sig>