All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexandru Gagniuc <mr.nuke.me@gmail.com>
To: bhelgaas@google.com
Cc: austin_bolen@dell.com, alex_gagniuc@dellteam.com,
	keith.busch@intel.com, Shyam_Iyer@Dell.com, lukas@wunner.de,
	okaya@kernel.org, linux-pci@vger.kernel.org,
	Alexandru Gagniuc <mr.nuke.me@gmail.com>,
	"Rafael J. Wysocki" <rafael.j.wysocki@intel.com>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	Oza Pawandeep <poza@codeaurora.org>,
	linux-kernel@vger.kernel.org
Subject: [PATCH RFC v2 1/4] PCI: hotplug: Add support for disabling in-band presence
Date: Tue, 19 Feb 2019 19:20:27 -0600	[thread overview]
Message-ID: <20190220012031.10741-2-mr.nuke.me@gmail.com> (raw)
In-Reply-To: <20190220012031.10741-1-mr.nuke.me@gmail.com>

The presence detect state (PDS) is normally a logical or of in-band
and out-of-band presence. In PCIe 4.0, there is the option to disable
in-band presence so that the PDS bit always reflects the state of the
out-of-band presence.

The recommendation of the PCIe spec is to disable in-band presence
whenever supported.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
---
 drivers/pci/hotplug/pciehp.h     |  1 +
 drivers/pci/hotplug/pciehp_hpc.c | 12 +++++++++++-
 include/linux/pci.h              |  1 +
 include/uapi/linux/pci_regs.h    |  2 ++
 4 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index 506e1d923a1f..6f729ce4a7b9 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -98,6 +98,7 @@ struct controller {
 	struct pcie_device *pcie;
 
 	u32 slot_cap;				/* capabilities and quirks */
+	unsigned int inband_presence_disabled:1;
 
 	u16 slot_ctrl;				/* control register access */
 	struct mutex ctrl_lock;
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 7dd443aea5a5..f77dc7c38f9a 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -824,7 +824,7 @@ static inline void dbg_ctrl(struct controller *ctrl)
 struct controller *pcie_init(struct pcie_device *dev)
 {
 	struct controller *ctrl;
-	u32 slot_cap, link_cap;
+	u32 slot_cap, slot_cap2, link_cap;
 	u8 poweron;
 	struct pci_dev *pdev = dev->port;
 	struct pci_bus *subordinate = pdev->subordinate;
@@ -846,6 +846,9 @@ struct controller *pcie_init(struct pcie_device *dev)
 	if (pdev->is_thunderbolt)
 		slot_cap |= PCI_EXP_SLTCAP_NCCS;
 
+	if (pdev->no_in_band_presence)
+		ctrl->inband_presence_disabled = 1;
+
 	ctrl->slot_cap = slot_cap;
 	mutex_init(&ctrl->ctrl_lock);
 	mutex_init(&ctrl->state_lock);
@@ -882,6 +885,13 @@ struct controller *pcie_init(struct pcie_device *dev)
 		FLAG(link_cap, PCI_EXP_LNKCAP_DLLLARC),
 		pdev->broken_cmd_compl ? " (with Cmd Compl erratum)" : "");
 
+	pcie_capability_read_dword(pdev, PCI_EXP_SLTCAP2, &slot_cap2);
+	if (slot_cap2 & PCI_EXP_SLTCAP2_IBPD) {
+		pcie_write_cmd_nowait(ctrl, PCI_EXP_SLTCTL_IBPD_DISABLE,
+				      PCI_EXP_SLTCTL_IBPD_DISABLE);
+		ctrl->inband_presence_disabled = 1;
+	}
+
 	/*
 	 * If empty slot's power status is on, turn power off.  The IRQ isn't
 	 * requested yet, so avoid triggering a notification with this command.
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 65f1d8c2f082..9d08cdbca459 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -413,6 +413,7 @@ struct pci_dev {
 	unsigned int	non_compliant_bars:1;	/* Broken BARs; ignore them */
 	unsigned int	is_probed:1;		/* Device probing in progress */
 	unsigned int	link_active_reporting:1;/* Device capable of reporting link active */
+	unsigned int	no_in_band_presence:1;	/* Device does not report in-band presence */
 	unsigned int	no_vf_scan:1;		/* Don't scan for VFs after IOV enablement */
 	pci_dev_flags_t dev_flags;
 	atomic_t	enable_cnt;	/* pci_enable_device has been called */
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index e1e9888c85e6..5423dc476c77 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -597,6 +597,7 @@
 #define  PCI_EXP_SLTCTL_PWR_OFF        0x0400 /* Power Off */
 #define  PCI_EXP_SLTCTL_EIC	0x0800	/* Electromechanical Interlock Control */
 #define  PCI_EXP_SLTCTL_DLLSCE	0x1000	/* Data Link Layer State Changed Enable */
+#define  PCI_EXP_SLTCTL_IBPD_DISABLE	0x4000 /* In-band PD disable */
 #define PCI_EXP_SLTSTA		26	/* Slot Status */
 #define  PCI_EXP_SLTSTA_ABP	0x0001	/* Attention Button Pressed */
 #define  PCI_EXP_SLTSTA_PFD	0x0002	/* Power Fault Detected */
@@ -667,6 +668,7 @@
 #define PCI_EXP_LNKSTA2		50	/* Link Status 2 */
 #define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2	52	/* v2 endpoints with link end here */
 #define PCI_EXP_SLTCAP2		52	/* Slot Capabilities 2 */
+#define  PCI_EXP_SLTCAP2_IBPD	0x0001	/* In-band PD Disable Supported */
 #define PCI_EXP_SLTCTL2		56	/* Slot Control 2 */
 #define PCI_EXP_SLTSTA2		58	/* Slot Status 2 */
 
-- 
2.19.2


  reply	other threads:[~2019-02-20  1:20 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-20  1:20 [PATCH RFC v2 0/4] PCI: pciehp: Do not turn off slot if presence comes up after link Alexandru Gagniuc
2019-02-20  1:20 ` Alexandru Gagniuc [this message]
2019-02-21  7:19   ` [PATCH RFC v2 1/4] PCI: hotplug: Add support for disabling in-band presence Lukas Wunner
2019-02-21 18:05     ` Alex_Gagniuc
2019-02-20  1:20 ` [PATCH RFC v2 2/4] PCI: pciehp: Do not turn off slot if presence comes up after link Alexandru Gagniuc
2019-02-21  7:36   ` Lukas Wunner
2019-02-22 19:56     ` Alex_Gagniuc
2019-02-23  6:49       ` Lukas Wunner
2019-02-24 22:27         ` Alex_Gagniuc
2019-02-20  1:20 ` [PATCH RFC v2 3/4] PCI: hotplug: Wait for PDS when in-band presence is disabled Alexandru Gagniuc
2019-02-20  1:20 ` [PATCH RFC v2 4/4] PCI: hotplug: Add quirk For Dell nvme pcie switches Alexandru Gagniuc
2019-02-21  7:56   ` Lukas Wunner
2019-02-21 18:35     ` Alex_Gagniuc
2019-02-22  1:20       ` Joe Perches
2019-02-22  2:04       ` Oliver
2019-02-22 19:19         ` Alex_Gagniuc
2019-02-21 15:38 ` [PATCH RFC v2 0/4] PCI: pciehp: Do not turn off slot if presence comes up after link Lukas Wunner
2019-02-21 18:17   ` Alex_Gagniuc
2019-04-19  0:01 ` Bjorn Helgaas
2019-04-19 15:22   ` [PATCH v3 " Alexandru Gagniuc
2019-04-19 15:22     ` [PATCH v3 1/4] PCI: hotplug: Add support for disabling in-band presence Alexandru Gagniuc
2019-04-19 15:22     ` [PATCH v3 2/4] PCI: pciehp: Do not turn off slot if presence comes up after link Alexandru Gagniuc
2019-04-19 15:22     ` [PATCH v3 3/4] PCI: hotplug: Wait for PDS when in-band presence is disabled Alexandru Gagniuc
2019-04-19 15:22     ` [PATCH v3 4/4] PCI: hotplug: Add quirk For Dell nvme pcie switches Alexandru Gagniuc
2019-04-19 21:00       ` Alan J. Wylie

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190220012031.10741-2-mr.nuke.me@gmail.com \
    --to=mr.nuke.me@gmail.com \
    --cc=Shyam_Iyer@Dell.com \
    --cc=alex_gagniuc@dellteam.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=austin_bolen@dell.com \
    --cc=bhelgaas@google.com \
    --cc=keith.busch@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=mika.westerberg@linux.intel.com \
    --cc=okaya@kernel.org \
    --cc=poza@codeaurora.org \
    --cc=rafael.j.wysocki@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.