Re: [PATCH v2] iio/gyro/bmg160: Use millidegrees for temperature scale

[Jonathan Cameron <jic23@kernel.org>]

On Wed, 13 Feb 2019 08:41:47 +0100
Mike Looijmans <mike.looijmans@topic.nl> wrote:

> Standard unit for temperature is millidegrees Celcius, whereas this driver
> was reporting in degrees. Fix the scale factor in the driver.
> 
> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Applied to the fixes-togreg branch of iio.git and marked for stable.

Thanks,

Jonathan
> ---
> v2: Don't touch val2 when returning IIO_VAL_INT
>     Only touch val when returning a value
> 
>  drivers/iio/gyro/bmg160_core.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/iio/gyro/bmg160_core.c b/drivers/iio/gyro/bmg160_core.c
> index 63ca316..92c07ab 100644
> --- a/drivers/iio/gyro/bmg160_core.c
> +++ b/drivers/iio/gyro/bmg160_core.c
> @@ -582,11 +582,10 @@ static int bmg160_read_raw(struct iio_dev *indio_dev,
>  	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
>  		return bmg160_get_filter(data, val);
>  	case IIO_CHAN_INFO_SCALE:
> -		*val = 0;
>  		switch (chan->type) {
>  		case IIO_TEMP:
> -			*val2 = 500000;
> -			return IIO_VAL_INT_PLUS_MICRO;
> +			*val = 500;
> +			return IIO_VAL_INT;
>  		case IIO_ANGL_VEL:
>  		{
>  			int i;
> @@ -594,6 +593,7 @@ static int bmg160_read_raw(struct iio_dev *indio_dev,
>  			for (i = 0; i < ARRAY_SIZE(bmg160_scale_table); ++i) {
>  				if (bmg160_scale_table[i].dps_range ==
>  							data->dps_range) {
> +					*val = 0;
>  					*val2 = bmg160_scale_table[i].scale;
>  					return IIO_VAL_INT_PLUS_MICRO;
>  				}