From: Shawn Guo <shawnguo@kernel.org>
To: Alison Wang <alison.wang@nxp.com>
Cc: leoyang.li@nxp.com, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] arm64: dts: ls1028a: Add Audio DT nodes
Date: Fri, 1 Mar 2019 10:41:08 +0800 [thread overview]
Message-ID: <20190301024107.GN26041@dragon> (raw)
In-Reply-To: <20190220084457.31357-1-alison.wang@nxp.com>
On Wed, Feb 20, 2019 at 04:44:57PM +0800, Alison Wang wrote:
> This patch adds Audio DT nodes for LS1028ARDB and LS1028AQDS boards.
>
> Signed-off-by: Alison Wang <alison.wang@nxp.com>
> ---
> Changes in v2:
> - Modify some nodes' names.
> - Use GIC_SPI and IRQ_TYPE_LEVEL_HIGH.
>
> arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 62 ++++++++++++++++++++
> arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 63 +++++++++++++++++++++
> arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 57 +++++++++++++++++++
> 3 files changed, 182 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> index 14c79f4..b359068 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> @@ -32,6 +32,49 @@
> device_type = "memory";
> reg = <0x0 0x80000000 0x1 0x00000000>;
> };
> +
> + sys_mclk: clock-mclk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <25000000>;
> + };
> +
> + reg_1p8v: regulator-1p8v {
> + compatible = "regulator-fixed";
> + regulator-name = "1P8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + sound {
> + compatible = "simple-audio-card";
> + simple-audio-card,format = "i2s";
> + simple-audio-card,widgets =
> + "Microphone", "Microphone Jack",
> + "Headphone", "Headphone Jack",
> + "Speaker", "Speaker Ext",
> + "Line", "Line In Jack";
> + simple-audio-card,routing =
> + "MIC_IN", "Microphone Jack",
> + "Microphone Jack", "Mic Bias",
> + "LINE_IN", "Line In Jack",
> + "Headphone Jack", "HP_OUT",
> + "Speaker Ext", "LINE_OUT";
> +
> + simple-audio-card,cpu {
> + sound-dai = <&sai1>;
> + frame-master;
> + bitclock-master;
> + };
> +
> + simple-audio-card,codec {
> + sound-dai = <&sgtl5000>;
> + frame-master;
> + bitclock-master;
> + system-clock-frequency = <25000000>;
> + };
> + };
> };
>
> &duart0 {
> @@ -89,5 +132,24 @@
> reg = <0x57>;
> };
> };
> +
> + i2c@5 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x5>;
> +
> + sgtl5000: audio-codec@a {
> + #sound-dai-cells = <0>;
> + compatible = "fsl,sgtl5000";
> + reg = <0xa>;
> + VDDA-supply = <®_1p8v>;
> + VDDIO-supply = <®_1p8v>;
> + clocks = <&sys_mclk>;
> + };
> + };
> };
> };
> +
> +&sai1 {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> index fdeb417..50ca51a 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> @@ -28,6 +28,49 @@
> device_type = "memory";
> reg = <0x0 0x80000000 0x1 0x0000000>;
> };
> +
> + sys_mclk: clock-mclk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <25000000>;
> + };
> +
> + reg_1p8v: regulator-1p8v {
> + compatible = "regulator-fixed";
> + regulator-name = "1P8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + sound {
> + compatible = "simple-audio-card";
> + simple-audio-card,format = "i2s";
> + simple-audio-card,widgets =
> + "Microphone", "Microphone Jack",
> + "Headphone", "Headphone Jack",
> + "Speaker", "Speaker Ext",
> + "Line", "Line In Jack";
> + simple-audio-card,routing =
> + "MIC_IN", "Microphone Jack",
> + "Microphone Jack", "Mic Bias",
> + "LINE_IN", "Line In Jack",
> + "Headphone Jack", "HP_OUT",
> + "Speaker Ext", "LINE_OUT";
> +
> + simple-audio-card,cpu {
> + sound-dai = <&sai4>;
> + frame-master;
> + bitclock-master;
> + };
> +
> + simple-audio-card,codec {
> + sound-dai = <&sgtl5000>;
> + frame-master;
> + bitclock-master;
> + system-clock-frequency = <25000000>;
> + };
> + };
> };
>
> &i2c0 {
> @@ -39,6 +82,22 @@
> #address-cells = <1>;
> #size-cells = <0>;
>
> + i2c@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x1>;
> +
> + sgtl5000: audio-codec@a {
> + #sound-dai-cells = <0>;
> + compatible = "fsl,sgtl5000";
> + reg = <0xa>;
> + VDDA-supply = <®_1p8v>;
> + VDDIO-supply = <®_1p8v>;
> + clocks = <&sys_mclk>;
> + sclk-strength = <3>;
> + };
> + };
> +
> i2c@2 {
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -71,3 +130,7 @@
> &duart1 {
> status = "okay";
> };
> +
> +&sai4 {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index a8cf92a..de590ec 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -335,5 +335,62 @@
> <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
> };
> +
> + edma0: dma-controller@22c0000 {
Please sort the node in unit-address.
Shawn
> + #dma-cells = <2>;
> + compatible = "fsl,vf610-edma";
> + reg = <0x0 0x22c0000 0x0 0x10000>,
> + <0x0 0x22d0000 0x0 0x10000>,
> + <0x0 0x22e0000 0x0 0x10000>;
> + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "edma-tx", "edma-err";
> + dma-channels = <32>;
> + clock-names = "dmamux0", "dmamux1";
> + clocks = <&clockgen 4 1>,
> + <&clockgen 4 1>;
> + };
> +
> + sai1: audio-controller@f100000 {
> + #sound-dai-cells = <0>;
> + compatible = "fsl,vf610-sai";
> + reg = <0x0 0xf100000 0x0 0x10000>;
> + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 1>, <&clockgen 4 1>,
> + <&clockgen 4 1>, <&clockgen 4 1>;
> + clock-names = "bus", "mclk1", "mclk2", "mclk3";
> + dma-names = "tx", "rx";
> + dmas = <&edma0 1 4>,
> + <&edma0 1 3>;
> + status = "disabled";
> + };
> +
> + sai2: audio-controller@f110000 {
> + #sound-dai-cells = <0>;
> + compatible = "fsl,vf610-sai";
> + reg = <0x0 0xf110000 0x0 0x10000>;
> + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 1>, <&clockgen 4 1>,
> + <&clockgen 4 1>, <&clockgen 4 1>;
> + clock-names = "bus", "mclk1", "mclk2", "mclk3";
> + dma-names = "tx", "rx";
> + dmas = <&edma0 1 6>,
> + <&edma0 1 5>;
> + status = "disabled";
> + };
> +
> + sai4: audio-controller@f130000 {
> + #sound-dai-cells = <0>;
> + compatible = "fsl,vf610-sai";
> + reg = <0x0 0xf130000 0x0 0x10000>;
> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 1>, <&clockgen 4 1>,
> + <&clockgen 4 1>, <&clockgen 4 1>;
> + clock-names = "bus", "mclk1", "mclk2", "mclk3";
> + dma-names = "tx", "rx";
> + dmas = <&edma0 1 10>,
> + <&edma0 1 9>;
> + status = "disabled";
> + };
> };
> };
> --
> 1.7.1
>
next prev parent reply other threads:[~2019-03-01 2:41 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-20 8:44 [PATCH v2] arm64: dts: ls1028a: Add Audio DT nodes Alison Wang
2019-03-01 2:41 ` Shawn Guo [this message]
2019-03-01 7:35 ` Alison Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190301024107.GN26041@dragon \
--to=shawnguo@kernel.org \
--cc=alison.wang@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.