Re: [PATCH v2 2/2] dpaa2-eth: add XDP_REDIRECT support

[Jesper Dangaard Brouer <brouer@redhat.com>]

On Fri, 1 Mar 2019 17:47:24 +0000
Ioana Ciornei <ioana.ciornei@nxp.com> wrote:

> +static int dpaa2_eth_xdp_xmit_frame(struct net_device *net_dev,
> +				    struct xdp_frame *xdpf)
> +{
> +	struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
> +	struct device *dev = net_dev->dev.parent;
> +	struct rtnl_link_stats64 *percpu_stats;
> +	struct dpaa2_eth_drv_stats *percpu_extras;
> +	unsigned int needed_headroom;
> +	struct dpaa2_eth_swa *swa;
> +	struct dpaa2_eth_fq *fq;
> +	struct dpaa2_fd fd;
> +	void *buffer_start, *aligned_start;
> +	dma_addr_t addr;
> +	int err, i;
> +
> +	/* We require a minimum headroom to be able to transmit the frame.
> +	 * Otherwise return an error and let the original net_device handle it
> +	 */
> +	needed_headroom = dpaa2_eth_needed_headroom(priv, NULL);
> +	if (xdpf->headroom < needed_headroom)
> +		return -EINVAL;
> +
> +	percpu_stats = this_cpu_ptr(priv->percpu_stats);
> +	percpu_extras = this_cpu_ptr(priv->percpu_extras);
> +
> +	/* Setup the FD fields */
> +	memset(&fd, 0, sizeof(fd));
> +
> +	/* Align FD address, if possible */
> +	buffer_start = xdpf->data - needed_headroom;
> +	aligned_start = PTR_ALIGN(buffer_start - DPAA2_ETH_TX_BUF_ALIGN,
> +				  DPAA2_ETH_TX_BUF_ALIGN);
> +	if (aligned_start >= xdpf->data - xdpf->headroom)
> +		buffer_start = aligned_start;
> +
> +	swa = (struct dpaa2_eth_swa *)buffer_start;
> +	/* fill in necessary fields here */
> +	swa->type = DPAA2_ETH_SWA_XDP;
> +	swa->xdp.dma_size = xdpf->data + xdpf->len - buffer_start;
> +	swa->xdp.xdpf = xdpf;
> +
> +	addr = dma_map_single(dev, buffer_start,
> +			      swa->xdp.dma_size,
> +			      DMA_BIDIRECTIONAL);
> +	if (unlikely(dma_mapping_error(dev, addr))) {
> +		percpu_stats->tx_dropped++;
> +		return -ENOMEM;
> +	}
> +
> +	dpaa2_fd_set_addr(&fd, addr);
> +	dpaa2_fd_set_offset(&fd, xdpf->data - buffer_start);
> +	dpaa2_fd_set_len(&fd, xdpf->len);
> +	dpaa2_fd_set_format(&fd, dpaa2_fd_single);
> +	dpaa2_fd_set_ctrl(&fd, FD_CTRL_PTA);
> +
> +	fq = &priv->fq[smp_processor_id()];

It is guaranteed that you have one FQ per CPU in the system?

> +	for (i = 0; i < DPAA2_ETH_ENQUEUE_RETRIES; i++) {
> +		err = priv->enqueue(priv, fq, &fd, 0);
> +		if (err != -EBUSY)
> +			break;


-- 
Best regards,
  Jesper Dangaard Brouer
  MSc.CS, Principal Kernel Engineer at Red Hat
  LinkedIn: http://www.linkedin.com/in/brouer