From: Greg KH <gregkh@linuxfoundation.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org
Subject: [GIT PULL] USB/PHY driver patches for 5.1-rc1
Date: Wed, 6 Mar 2019 11:35:31 +0100 [thread overview]
Message-ID: <20190306103531.GA10871@kroah.com> (raw)
The following changes since commit d13937116f1e82bf508a6325111b322c30c85eb9:
Linux 5.0-rc6 (2019-02-10 14:42:20 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git tags/usb-5.1-rc1
for you to fetch changes up to 1c7cf3d5e1c181caca75012b65252288c18a25f2:
wusb: Remove unnecessary static function ckhdid_printf (2019-03-01 20:53:41 +0100)
----------------------------------------------------------------
USB/PHY patches for 5.1-rc1
Here is the big USB/PHY driver pull request for 5.1-rc1.
The usual set of gadget driver updates, phy driver updates (you will
have a merge issue with Kconfig and Makefile), xhci updates, and typec
additions. Also included in here are a lot of small cleanups and fixes
and driver updates where needed.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----------------------------------------------------------------
Abel Vesa (1):
phy: freescale: Break dependency on SOC_IMX8MQ for USB PHY
Alan Stern (1):
USB: gadget: Improve kerneldoc for usb_ep_dequeue()
Andrzej Pietrasiewicz (4):
usb: dwc2: gadget: Add scatter-gather mode
usb: gadget: move non-super speed code out of usb_ep_autoconfig_ss()
usb: gadget: f_fs: preserve wMaxPacketSize across usb_ep_autoconfig() call
usb: gadget: Change Andrzej Pietrasiewicz's e-mail address
Andy Shevchenko (1):
usb: dwc3: drd: Defer probe if extcon device is not found
Balaji Manoharan (1):
usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI
Bharath Vedartham (1):
USB: storage: karma: add whitespace after declarations
Christoph Hellwig (2):
fotg210-udc: remove a bogus dma_sync_single_for_device call
fotg210-udc: pass struct device to DMA API functions
Chunfeng Yun (2):
usb: devio: update max count of DPs per interval for ISOC
usb: xhci: remove unused member 'parent' in xhci_regset struct
Colin Ian King (6):
usb: host: u132-hcd: fix a couple of indentation issues
usb: gadget: fix various indentation issues
USB: musb: fix indentation issue on a return statement
usb: host: oxu210hp-hcd: fix indentation issue
USB: renesas_usbhs: fix spelling mistake "doens't" -> "doesn't"
usb: typec: mux: remove redundant check on variable match
Daniele Palmas (1):
USB: serial: option: add Telit ME910 ECM composition
Dmitry Osipenko (1):
usb: chipidea: tegra: Fix missed ci_hdrc_remove_device()
Dmitry Torokhov (1):
usb: core: add option of only authorizing internal devices
Enric Balletbo i Serra (3):
phy: rockchip-inno-usb2: fix misspelling and kernel-doc documentation
dt-bindings: phy-rockchip-inno-usb2: add documentation for extcon property
phy: phy-rockchip-inno-usb2: drop reading the utmi-avalid property
Fabrizio Castro (4):
usb: gadget: udc: renesas_usb3: Add bindings for r8a774c0
dt-bindings: usb: renesas_usbhs: Add r8a774c0 support
usb: gadget: udc: renesas_usb3: add support for r8a774c0
dt-bindings: rcar-gen3-phy-usb2: Add r8a774c0 support
Felipe Balbi (10):
usb: dwc3: gadget: add dwc3_request status tracking
usb: dwc3: gadget: prevent dwc3_request from being queued twice
usb: dwc3: gadget: remove req->started flag
usb: dwc3: gadget: clear DWC3_EP_TRANSFER_STARTED on cmd complete
usb: dwc3: gadget: don't use resource_index as a flag
usb: dwc3: gadget: early giveback if End Transfer already completed
usb: dwc3: gadget: remove DWC3_EP_END_TRANSFER_PENDING
usb: dwc3: trace: pass trace buffer size to decoding functions
usb: dwc3: debug: purge usage of strcat
usb: dwc3: gadget: don't enable interrupt when disabling endpoint
Greg Kroah-Hartman (10):
Merge 5.0-rc2 into usb-next
USB: add missing SPDX lines to Kconfig and Makefiles
USB: remove README file
USB: host: whci: rename Kbuild file
Merge 5.0-rc4 into usb-next
Merge 5.0-rc6 into usb-next
Merge tag 'phy-for-5.1' of git://git.kernel.org/.../kishon/linux-phy into usb-next
Merge tag 'usb-for-v5.1' of git://git.kernel.org/.../balbi/usb into usb-next
Merge tag 'usb-serial-5.1-rc1' of https://git.kernel.org/.../johan/usb-serial into usb-next
Merge tag 'usb-serial-5.1-rc1-2' of https://git.kernel.org/.../johan/usb-serial into usb-next
Gregory CLEMENT (1):
phy: armada375-usb2: switch to SPDX license identifier
Guenter Roeck (1):
usb: typec: tcpm: Remove unused functions
Guido Kiener (1):
udc: net2280: Fix net2280_disable
Gustavo A. R. Silva (7):
USB: core: urb: Use struct_size() in kmalloc()
xhci: Use struct_size() in kzalloc()
uwb: use struct_size() in kzalloc()
USB: musb: mark expected switch fall-through
usb: dwc2: use struct_size() in kzalloc()
usb: core: config: Use struct_size() in kzalloc()
usb: wusbcore: wa-xfer: use struct_size() helper
Heikki Krogerus (13):
usb: typec: displayport: Move the Configuration VDO helpers to the header
usb: typec: Prepare alt mode enter/exit reporting for UCSI alt mode support
usb: typec: ucsi: Remove debug.h file
usb: typec: tps6598x: Check mode of operation
platform/x86: intel_cht_int33fe: Prepare for better mux naming scheme
usb: typec: Rationalize the API for the muxes
platform/x86: intel_cht_int33fe: Remove old style mux connections
device connection: Prepare support for firmware described connections
usb: roles: Find the muxes by also matching against the device node
usb: typec: Find the ports by also matching against the device node
device connection: Find device connections also from device graphs
usb: typec: mux: Find the muxes by also matching against the device node
device connection: Add fwnode member to struct device_connection
Icenowy Zheng (1):
USB: serial: cp210x: add GPIO support for CP2104
Ivan Mironov (1):
USB: serial: cp210x: add ID for Ingenico 3070
Jakub Wilk (1):
usb: core: Fix typo in description of "authorized_default"
Jan-Marek Glogowski (1):
usb: handle warm-reset port requests on hub resume
Jean-Philippe Menil (1):
usb: xhci: fix build warning - missing prototype
Jeffrey Hugo (5):
dt-bindings: usb: Add support for msm8998
usb: dwc3: qcom: Add support for MSM8998
dt-bindings: phy-qcom: Add support for msm8998 usb
phy: qcom-qmp: Add QMP V3 USB3 PHY support for msm8998
phy: qcom-qusb2: Add QUSB2 PHY support for msm8998
Jiri Slaby (4):
usb: sisusb_con, convert addr macros to functions
usb: sisusb_con, cleanup configs
usb: sisusb: let files build only when needed
usb: sisusb: remove useless macros and compact the code
Joe Perches (1):
wusb: Remove unnecessary static function ckhdid_printf
Johanna Abrahamsson (1):
USB: serial: cp210x: add minimum baud rate for CP2105 SCI
John Stultz (1):
usb: f_fs: Avoid crash due to out-of-scope stack ptr access
Jon Flatley (1):
usb: Change "wired" to "hardwired" for connect_type
Julia Lawall (2):
usb: gadget: udc: reduce indentation
usb: gadget: udc: reduce indentation
Jun Li (2):
usb: typec: tpcm: improve error handling of tcpm_register_port
usb: chipidea: imx: remove unused header files
Kai-Heng Feng (2):
USB: Add new USB LPM helpers
USB: Consolidate LPM checks to avoid enabling LPM twice
Karoly Pados (1):
USB: serial: cp210x: fix GPIO in autosuspend
Keyur Patel (1):
usb: core: Replace hardcoded check with inline function from usb.h
Mans Rullgard (4):
USB: serial: cp210x: support all gpios on CP2102N QFN28 package
USB: serial: ftdi_sio: add ID for Hjelmslund Electronics USB485
usb: core: skip interfaces disabled in devicetree
usb: core: make default autosuspend delay configurable
Marc Gonzalez (3):
phy: qcom-ufs: Use iopoll.h readl_poll_timeout macro
dt-bindings: phy-qcom-qmp: Add qcom,msm8998-qmp-ufs-phy
phy: qcom-qmp: Add QMP UFS PHY support for msm8998
Marco Felsch (2):
dt-bindings: usb: usb251xb: add documentation for data lane swapping
usb: usb251xb: add usb data lane port swap feature
Marek Szyprowski (1):
usb: misc: usb3503: Add system sleep support in non-I2C mode
Matteo Croce (1):
usb: gadget: aspeed: fix typo
Maxime Ripard (5):
phy: dphy: Remove unused header
phy: dphy: Change units of wakeup and init parameters
phy: dphy: Clarify lanes parameter documentation
dt-bindings: phy: Move the Cadence D-PHY bindings
phy: Add Cadence D-PHY support
Michał Mirosław (1):
usb: gadget: u_serial: process RX in workqueue instead of tasklet
Minas Harutyunyan (1):
usb: dwc2: Fix EP TxFIFO number setting
Miquel Raynal (10):
usb: core: comply to PHY framework
usb: ehci-orion: avoid double PHY initialization
usb: ehci-orion: add S2RAM support
phy: mvebu-cp110-comphy: fix port check in ->xlate()
phy: add A3700 COMPHY support
dt-bindings: phy: mvebu-comphy: extend the file to describe a3700 bindings
MAINTAINERS: phy: add entry for Armada 3700 COMPHY driver
phy: add A3700 UTMI PHY driver
dt-bindings: phy: mvebu-utmi: add UTMI PHY bindings
MAINTAINERS: phy: fill Armada 3700 PHY drivers entry
Nicolas Ferre (2):
USB: host: ohci-at91: add sam9x60-sfr definition for ohci
dt-bindings: arm: atmel: add new sam9x60 SFR binding
Nicolas Saenz Julienne (1):
usb: hub: add retry routine after intr URB submit error
Nikolaus Voss (1):
usb: typec: tps6598x: handle block writes separately with plain-I2C adapters
Nikolay Yakimov (1):
USB: Fix configuration selection issues introduced in v4.20.0
Ofer Heifetz (1):
usb: host: xhci: mvebu: add reset on resume quirk
Paul Cercueil (4):
Documentation: dt: Add binding info for jz4740-musb driver
usb: musb: jz4740: Add support for devicetree
usb: musb: Kconfig: Drop dependency on MACH_JZ4740 for jz4740
usb: musb: Kconfig: Drop dependency on CONFIG_USB for jz4740
Paul Elder (1):
usb: gadget: uvc: add uvcg_warn macro
Paul Gortmaker (3):
phy: make phy-core explicitly non-modular
phy: make phy-mvebu-sata explicitly non-modular
phy: make phy-armada375-usb2 explicitly non-modular
Paul Kocialkowski (2):
usb: chipidea: Grab the (legacy) USB PHY by phandle first
usb: chipidea: Refactor USB PHY selection and keep a single PHY
Peter Chen (1):
usb: misc: usbtest: add super-speed isoc support
Philipp Puschmann (2):
dt-bindings: usb: ci-hdrc-usb2: add property power-active-high
usb: chipidea: imx: set power polarity
Prabhat Chand Pandey (1):
usb: xhci: dbc: Fixing typo error.
Qingmin Liu (1):
phy: bcm-sr-pcie: Change operation when PIPEMUX=1
Ran Wang (3):
usb: ehci: fsl: Update register accessing for arm/arm64 platforms
usb: kconfig: remove dependency FSL_SOC for ehci fsl driver
drivers: usb :fsl: Remove USB Errata checking code
Roger Quadros (7):
usb: dwc3: gadget: Fix OTG events when gadget driver isn't loaded
dt-bindings: usb: keystone-usb: Add ti,am654-dwc3 support
usb: dwc3: keystone: Add support for ti,am654-dwc3
phy: ti: usb2: Fix logic on -EPROBE_DEFER
phy: ti: Don't depend on OMAP_OCP2SCP
dt-bindings: phy: ti: Add support for AM654x USB2 PHY
phy: ti: usb2: Add support for AM654 USB2 PHY
Shuah Khan (2):
usbip: Fix vhci_urb_enqueue() URB null transfer buffer error path
usbip: Fix vep_free_request() null pointer checks on input args
Suwan Kim (2):
usb: core: Simplify return value of usb_get_configuration()
usb: core: Move variable initialization to appropriate place
Sven Van Asbroeck (1):
usb: phy: twl6030-usb: fix possible use-after-free on remove
Thierry Reding (1):
xhci: tegra: Prevent error pointer dereference
Thinh Nguyen (2):
usb: dwc3: haps: Workaround matching VID PID
usb: dwc3: Reset num_trbs after skipping
Yoshihiro Shimoda (2):
usb: renesas_usbhs: replace udelay() with usleep_range()
usb: renesas_usbhs: replace udelay() with usleep_range()
YueHaibing (6):
usb: ftdi-elan: remove a unnecessary variable 'empty_packets'
usb: ftdi-elan: Fix if == else warnings in ftdi_elan_respond_engine
usb: gadget: Remove dead branch code
usb: typec: mux: Fix unsigned comparison with less than zero
usb: host: oxu210hp-hcd: remove set but not used variables 'uframes, transfer_buffer_length'
cdc-wdm: pass return value of recover_from_urb_loss
liangshengjun (1):
usb: gadget: function: sync f_uac1 ac header baInterfaceNr
Documentation/ABI/testing/sysfs-bus-usb | 2 +-
Documentation/admin-guide/kernel-parameters.txt | 3 +-
.../devicetree/bindings/arm/atmel-sysregs.txt | 1 +
.../bindings/display/bridge/cdns,dsi.txt | 21 --
.../devicetree/bindings/phy/cdns,dphy.txt | 20 ++
.../devicetree/bindings/phy/phy-mvebu-comphy.txt | 65 +++-
.../devicetree/bindings/phy/phy-mvebu-utmi.txt | 38 ++
.../bindings/phy/phy-rockchip-inno-usb2.txt | 2 +
.../devicetree/bindings/phy/qcom-qmp-phy.txt | 9 +
.../devicetree/bindings/phy/qcom-qusb2-phy.txt | 1 +
.../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 2 +
Documentation/devicetree/bindings/phy/ti-phy.txt | 1 +
.../devicetree/bindings/usb/ci-hdrc-usb2.txt | 1 +
.../bindings/usb/ingenic,jz4740-musb.txt | 24 ++
.../devicetree/bindings/usb/keystone-usb.txt | 6 +-
.../devicetree/bindings/usb/qcom,dwc3.txt | 1 +
.../devicetree/bindings/usb/renesas_usb3.txt | 1 +
.../devicetree/bindings/usb/renesas_usbhs.txt | 1 +
Documentation/devicetree/bindings/usb/usb251xb.txt | 4 +
Documentation/usb/authorization.txt | 4 +-
MAINTAINERS | 8 +
drivers/base/devcon.c | 62 +++-
drivers/phy/broadcom/phy-bcm-sr-pcie.c | 4 +-
drivers/phy/cadence/Kconfig | 13 +-
drivers/phy/cadence/Makefile | 1 +
drivers/phy/cadence/cdns-dphy.c | 391 +++++++++++++++++++++
drivers/phy/freescale/Kconfig | 2 +-
drivers/phy/marvell/Kconfig | 21 ++
drivers/phy/marvell/Makefile | 2 +
drivers/phy/marvell/phy-armada375-usb2.c | 13 +-
drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 318 +++++++++++++++++
drivers/phy/marvell/phy-mvebu-a3700-utmi.c | 278 +++++++++++++++
drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 2 -
drivers/phy/marvell/phy-mvebu-sata.c | 9 +-
drivers/phy/phy-core-mipi-dphy.c | 8 +-
drivers/phy/phy-core.c | 12 +-
drivers/phy/qualcomm/phy-qcom-qmp.c | 143 ++++++++
drivers/phy/qualcomm/phy-qcom-qmp.h | 4 +
drivers/phy/qualcomm/phy-qcom-qusb2.c | 40 +++
drivers/phy/qualcomm/phy-qcom-ufs-i.h | 19 +-
drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 48 ++-
drivers/phy/ti/Kconfig | 6 +-
drivers/phy/ti/phy-omap-usb2.c | 105 +++---
drivers/platform/x86/intel_cht_int33fe.c | 15 +-
drivers/usb/Kconfig | 1 +
drivers/usb/README | 54 ---
drivers/usb/atm/Kconfig | 1 +
drivers/usb/chipidea/Kconfig | 2 +
drivers/usb/chipidea/ci_hdrc_imx.c | 6 +-
drivers/usb/chipidea/ci_hdrc_imx.h | 1 +
drivers/usb/chipidea/ci_hdrc_tegra.c | 1 +
drivers/usb/chipidea/core.c | 46 ++-
drivers/usb/chipidea/usbmisc_imx.c | 7 +
drivers/usb/class/Kconfig | 1 +
drivers/usb/class/cdc-wdm.c | 2 +-
drivers/usb/core/Kconfig | 13 +
drivers/usb/core/config.c | 14 +-
drivers/usb/core/devio.c | 10 +-
drivers/usb/core/driver.c | 23 +-
drivers/usb/core/generic.c | 44 ++-
drivers/usb/core/hcd.c | 56 +--
drivers/usb/core/hub.c | 66 +++-
drivers/usb/core/hub.h | 2 +
drivers/usb/core/message.c | 10 +-
drivers/usb/core/phy.c | 28 ++
drivers/usb/core/phy.h | 2 +
drivers/usb/core/sysfs.c | 5 +-
drivers/usb/core/urb.c | 5 +-
drivers/usb/core/usb.c | 37 +-
drivers/usb/core/usb.h | 10 +-
drivers/usb/dwc2/Kconfig | 2 +
drivers/usb/dwc2/gadget.c | 114 ++++--
drivers/usb/dwc2/hcd.c | 4 +-
drivers/usb/dwc3/Kconfig | 8 +-
drivers/usb/dwc3/core.h | 12 +-
drivers/usb/dwc3/debug.h | 156 ++++----
drivers/usb/dwc3/drd.c | 9 +-
drivers/usb/dwc3/dwc3-haps.c | 9 +
drivers/usb/dwc3/dwc3-keystone.c | 11 +-
drivers/usb/dwc3/dwc3-qcom.c | 1 +
drivers/usb/dwc3/gadget.c | 65 ++--
drivers/usb/dwc3/gadget.h | 4 +-
drivers/usb/dwc3/trace.h | 10 +-
drivers/usb/gadget/Kconfig | 1 +
drivers/usb/gadget/epautoconf.c | 41 ++-
drivers/usb/gadget/function/f_fs.c | 12 +
drivers/usb/gadget/function/f_uac1.c | 10 +-
drivers/usb/gadget/function/u_ecm.h | 2 +-
drivers/usb/gadget/function/u_eem.h | 2 +-
drivers/usb/gadget/function/u_ether_configfs.h | 2 +-
drivers/usb/gadget/function/u_fs.h | 2 +-
drivers/usb/gadget/function/u_gether.h | 2 +-
drivers/usb/gadget/function/u_hid.h | 2 +-
drivers/usb/gadget/function/u_midi.h | 2 +-
drivers/usb/gadget/function/u_ncm.h | 2 +-
drivers/usb/gadget/function/u_printer.h | 2 +-
drivers/usb/gadget/function/u_rndis.h | 2 +-
drivers/usb/gadget/function/u_serial.c | 35 +-
drivers/usb/gadget/function/u_uac2.h | 2 +-
drivers/usb/gadget/function/u_uvc.h | 2 +-
drivers/usb/gadget/function/uvc.h | 2 +
drivers/usb/gadget/function/uvc_configfs.c | 10 +-
drivers/usb/gadget/function/uvc_configfs.h | 2 +-
drivers/usb/gadget/function/uvc_v4l2.h | 2 +-
drivers/usb/gadget/function/uvc_video.h | 2 +-
drivers/usb/gadget/legacy/Kconfig | 1 +
drivers/usb/gadget/legacy/inode.c | 40 +--
drivers/usb/gadget/u_f.c | 2 +-
drivers/usb/gadget/u_f.h | 2 +-
drivers/usb/gadget/u_os_desc.h | 2 +-
drivers/usb/gadget/udc/Kconfig | 1 +
drivers/usb/gadget/udc/aspeed-vhub/epn.c | 2 +-
drivers/usb/gadget/udc/aspeed-vhub/hub.c | 2 +-
drivers/usb/gadget/udc/bdc/Kconfig | 2 +
drivers/usb/gadget/udc/bdc/bdc_cmd.c | 4 +-
drivers/usb/gadget/udc/core.c | 8 +-
drivers/usb/gadget/udc/fotg210-udc.c | 11 +-
drivers/usb/gadget/udc/net2280.c | 6 +-
drivers/usb/gadget/udc/renesas_usb3.c | 4 +
drivers/usb/gadget/udc/snps_udc_core.c | 17 +-
drivers/usb/host/Kconfig | 8 +-
drivers/usb/host/ehci-fsl.c | 69 ++--
drivers/usb/host/ehci-orion.c | 44 ++-
drivers/usb/host/fsl-mph-dr-of.c | 6 +
drivers/usb/host/ohci-at91.c | 7 +-
drivers/usb/host/oxu210hp-hcd.c | 10 +-
drivers/usb/host/u132-hcd.c | 6 +-
drivers/usb/host/whci/{Kbuild => Makefile} | 2 +
drivers/usb/host/xhci-dbgcap.c | 6 +-
drivers/usb/host/xhci-debugfs.h | 1 -
drivers/usb/host/xhci-mem.c | 2 +-
drivers/usb/host/xhci-mvebu.c | 11 +
drivers/usb/host/xhci-mvebu.h | 6 +
drivers/usb/host/xhci-pci.c | 1 +
drivers/usb/host/xhci-plat.c | 7 +
drivers/usb/host/xhci-tegra.c | 4 +-
drivers/usb/host/xhci.c | 3 +-
drivers/usb/image/Kconfig | 1 +
drivers/usb/isp1760/Kconfig | 2 +
drivers/usb/misc/Kconfig | 1 +
drivers/usb/misc/ftdi-elan.c | 26 --
drivers/usb/misc/sisusbvga/Kconfig | 1 +
drivers/usb/misc/sisusbvga/Makefile | 3 +-
drivers/usb/misc/sisusbvga/sisusb.c | 32 +-
drivers/usb/misc/sisusbvga/sisusb.h | 15 +-
drivers/usb/misc/sisusbvga/sisusb_con.c | 127 +++----
drivers/usb/misc/sisusbvga/sisusb_init.c | 5 -
drivers/usb/misc/usb251xb.c | 15 +-
drivers/usb/misc/usb3503.c | 38 +-
drivers/usb/misc/usbtest.c | 28 +-
drivers/usb/mon/Kconfig | 1 +
drivers/usb/mtu3/Kconfig | 2 +
drivers/usb/musb/Kconfig | 5 +-
drivers/usb/musb/jz4740.c | 10 +
drivers/usb/musb/musb_host.c | 4 +-
drivers/usb/phy/Kconfig | 1 +
drivers/usb/phy/phy-twl6030-usb.c | 2 +-
drivers/usb/renesas_usbhs/mod_host.c | 2 +-
drivers/usb/renesas_usbhs/rcar3.c | 2 +-
drivers/usb/renesas_usbhs/rza.c | 2 +-
drivers/usb/roles/Kconfig | 2 +
drivers/usb/roles/Makefile | 2 +
drivers/usb/roles/class.c | 21 +-
drivers/usb/serial/Kconfig | 1 +
drivers/usb/serial/cp210x.c | 130 ++++++-
drivers/usb/serial/ftdi_sio.c | 2 +
drivers/usb/serial/ftdi_sio_ids.h | 6 +
drivers/usb/serial/option.c | 2 +
drivers/usb/storage/Kconfig | 1 +
drivers/usb/storage/karma.c | 2 +
drivers/usb/typec/Kconfig | 1 +
drivers/usb/typec/altmodes/Kconfig | 1 +
drivers/usb/typec/altmodes/Makefile | 2 +
drivers/usb/typec/altmodes/displayport.c | 4 -
drivers/usb/typec/class.c | 33 +-
drivers/usb/typec/mux.c | 94 ++++-
drivers/usb/typec/mux/Kconfig | 2 +
drivers/usb/typec/tcpm/Kconfig | 2 +
drivers/usb/typec/tcpm/tcpm.c | 68 +---
drivers/usb/typec/tps6598x.c | 79 ++++-
drivers/usb/typec/ucsi/Kconfig | 2 +
drivers/usb/typec/ucsi/debug.h | 65 ----
drivers/usb/typec/ucsi/trace.c | 59 ++++
drivers/usb/typec/ucsi/trace.h | 7 +-
drivers/usb/usbip/Kconfig | 2 +
drivers/usb/usbip/vhci_hcd.c | 6 +-
drivers/usb/usbip/vudc_dev.c | 3 +-
drivers/usb/wusbcore/Kconfig | 1 +
drivers/usb/wusbcore/cbaf.c | 15 +-
drivers/usb/wusbcore/dev-sysfs.c | 5 +-
drivers/usb/wusbcore/devconnect.c | 2 +-
drivers/usb/wusbcore/wa-xfer.c | 15 +-
drivers/usb/wusbcore/wusbhc.c | 6 +-
drivers/uwb/drp-ie.c | 5 +-
include/linux/device.h | 6 +
include/linux/fsl_devices.h | 7 +-
include/linux/phy/phy-mipi-dphy.h | 13 +-
include/linux/usb/hcd.h | 10 +-
include/linux/usb/role.h | 2 +
include/linux/usb/tcpm.h | 6 -
include/linux/usb/typec_dp.h | 4 +
include/linux/usb/typec_mux.h | 3 +-
include/linux/usb/wusb.h | 16 -
203 files changed, 2951 insertions(+), 1110 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.txt
create mode 100644 Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt
create mode 100644 Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt
create mode 100644 drivers/phy/cadence/cdns-dphy.c
create mode 100644 drivers/phy/marvell/phy-mvebu-a3700-comphy.c
create mode 100644 drivers/phy/marvell/phy-mvebu-a3700-utmi.c
delete mode 100644 drivers/usb/README
rename drivers/usb/host/whci/{Kbuild => Makefile} (79%)
delete mode 100644 drivers/usb/typec/ucsi/debug.h
next reply other threads:[~2019-03-06 10:35 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-06 10:35 Greg KH [this message]
2019-03-07 1:20 ` [GIT PULL] USB/PHY driver patches for 5.1-rc1 pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190306103531.GA10871@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.