[Qemu-devel] [PATCH 8/8] file-posix: Make auto-read-only dynamic

[Kevin Wolf <kwolf@redhat.com>]

Until now, with auto-read-only=on we tried to open the file read-write
first and if that failed, read-only was tried. This is actually not good
enough for libvirt, which gives QEMU SELinux permissions for read-write
only as soon as it actually intends to write to the image. So we need to
be able to switch between read-only and read-write at runtime.

This patch makes auto-read-only dynamic, i.e. the file is opened
read-only as long as no user of the node has requested write
permissions, but it is automatically reopened read-write as soon as the
first writer is attached. Conversely, if the last writer goes away, the
file is reopened read-only again.

bs->read_only is no longer set for auto-read-only=on files even if the
file descriptor is opened read-only because it will be transparently
upgraded as soon as a writer is attached. This changes the output of
qemu-iotests 232.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 block/file-posix.c         | 36 +++++++++++++++++-------------------
 tests/qemu-iotests/232.out | 12 ++++++------
 2 files changed, 23 insertions(+), 25 deletions(-)

diff --git a/block/file-posix.c b/block/file-posix.c
index bcfb38ec4b..6718bc2e9c 100644
--- a/block/file-posix.c
+++ b/block/file-posix.c
@@ -376,13 +376,21 @@ static void raw_probe_alignment(BlockDriverState *bs, int fd, Error **errp)
     }
 }
 
-static void raw_parse_flags(int bdrv_flags, int *open_flags)
+static void raw_parse_flags(int bdrv_flags, int *open_flags, bool has_writers)
 {
+    bool read_write = false;
     assert(open_flags != NULL);
 
     *open_flags |= O_BINARY;
     *open_flags &= ~O_ACCMODE;
-    if (bdrv_flags & BDRV_O_RDWR) {
+
+    if (bdrv_flags & BDRV_O_AUTO_RDONLY) {
+        read_write = has_writers;
+    } else if (bdrv_flags & BDRV_O_RDWR) {
+        read_write = true;
+    }
+
+    if (read_write) {
         *open_flags |= O_RDWR;
     } else {
         *open_flags |= O_RDONLY;
@@ -518,24 +526,12 @@ static int raw_open_common(BlockDriverState *bs, QDict *options,
                                                false);
 
     s->open_flags = open_flags;
-    raw_parse_flags(bdrv_flags, &s->open_flags);
+    raw_parse_flags(bdrv_flags, &s->open_flags, false);
 
     s->fd = -1;
     fd = qemu_open(filename, s->open_flags, 0644);
     ret = fd < 0 ? -errno : 0;
 
-    if (ret == -EACCES || ret == -EROFS) {
-        /* Try to degrade to read-only, but if it doesn't work, still use the
-         * normal error message. */
-        if (bdrv_apply_auto_read_only(bs, NULL, NULL) == 0) {
-            bdrv_flags &= ~BDRV_O_RDWR;
-            raw_parse_flags(bdrv_flags, &s->open_flags);
-            assert(!(s->open_flags & O_CREAT));
-            fd = qemu_open(filename, s->open_flags);
-            ret = fd < 0 ? -errno : 0;
-        }
-    }
-
     if (ret < 0) {
         error_setg_errno(errp, -ret, "Could not open '%s'", filename);
         if (ret == -EROFS) {
@@ -846,12 +842,14 @@ static int raw_handle_perm_lock(BlockDriverState *bs,
 }
 
 static int raw_reconfigure_getfd(BlockDriverState *bs, int flags,
-                                 int *open_flags, bool force_dup,
+                                 int *open_flags, uint64_t perm, bool force_dup,
                                  Error **errp)
 {
     BDRVRawState *s = bs->opaque;
     int fd = -1;
     int ret;
+    bool has_writers = perm &
+        (BLK_PERM_WRITE | BLK_PERM_WRITE_UNCHANGED | BLK_PERM_RESIZE);
     int fcntl_flags = O_APPEND | O_NONBLOCK;
 #ifdef O_NOATIME
     fcntl_flags |= O_NOATIME;
@@ -862,7 +860,7 @@ static int raw_reconfigure_getfd(BlockDriverState *bs, int flags,
         *open_flags |= O_NONBLOCK;
     }
 
-    raw_parse_flags(flags, open_flags);
+    raw_parse_flags(flags, open_flags, has_writers);
 
 #ifdef O_ASYNC
     /* Not all operating systems have O_ASYNC, and those that don't
@@ -942,7 +940,7 @@ static int raw_reopen_prepare(BDRVReopenState *state,
     qemu_opts_to_qdict(opts, state->options);
 
     rs->fd = raw_reconfigure_getfd(state->bs, state->flags, &rs->open_flags,
-                                   true, &local_err);
+                                   state->perm, true, &local_err);
     if (local_err) {
         error_propagate(errp, local_err);
         ret = -1;
@@ -2715,7 +2713,7 @@ static int raw_check_perm(BlockDriverState *bs, uint64_t perm, uint64_t shared,
     } else {
         /* We may need a new fd if auto-read-only switches the mode */
         assert(!s->perm_change_fd);
-        ret = raw_reconfigure_getfd(bs, bs->open_flags, &open_flags,
+        ret = raw_reconfigure_getfd(bs, bs->open_flags, &open_flags, perm,
                                     false, errp);
         if (ret < 0) {
             return ret;
diff --git a/tests/qemu-iotests/232.out b/tests/qemu-iotests/232.out
index dcb683afa3..3bd1a920af 100644
--- a/tests/qemu-iotests/232.out
+++ b/tests/qemu-iotests/232.out
@@ -22,12 +22,12 @@ NODE_NAME: TEST_DIR/t.IMGFMT (file, read-only)
 NODE_NAME: TEST_DIR/t.IMGFMT (file, read-only)
 
 QEMU_PROG: -drive driver=file,file=TEST_DIR/t.IMGFMT,if=none,read-only=off,auto-read-only=off: Could not open 'TEST_DIR/t.IMGFMT': Permission denied
-NODE_NAME: TEST_DIR/t.IMGFMT (file, read-only)
-NODE_NAME: TEST_DIR/t.IMGFMT (file, read-only)
+NODE_NAME: TEST_DIR/t.IMGFMT (file)
+NODE_NAME: TEST_DIR/t.IMGFMT (file)
 
 QEMU_PROG: -drive driver=file,file=TEST_DIR/t.IMGFMT,if=none,auto-read-only=off: Could not open 'TEST_DIR/t.IMGFMT': Permission denied
-NODE_NAME: TEST_DIR/t.IMGFMT (file, read-only)
-NODE_NAME: TEST_DIR/t.IMGFMT (file, read-only)
+NODE_NAME: TEST_DIR/t.IMGFMT (file)
+NODE_NAME: TEST_DIR/t.IMGFMT (file)
 
 === -blockdev with read-write image: read-only/auto-read-only combinations ===
 
@@ -50,10 +50,10 @@ node0: TEST_DIR/t.IMGFMT (file, read-only)
 node0: TEST_DIR/t.IMGFMT (file, read-only)
 
 QEMU_PROG: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=node0,read-only=off,auto-read-only=off: Could not open 'TEST_DIR/t.IMGFMT': Permission denied
-node0: TEST_DIR/t.IMGFMT (file, read-only)
+node0: TEST_DIR/t.IMGFMT (file)
 QEMU_PROG: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=node0,read-only=off: Could not open 'TEST_DIR/t.IMGFMT': Permission denied
 
 QEMU_PROG: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=node0,auto-read-only=off: Could not open 'TEST_DIR/t.IMGFMT': Permission denied
-node0: TEST_DIR/t.IMGFMT (file, read-only)
+node0: TEST_DIR/t.IMGFMT (file)
 QEMU_PROG: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=node0: Could not open 'TEST_DIR/t.IMGFMT': Permission denied
 *** done
-- 
2.20.1