Re: [PATCH v3 1/2] iio/chemical/bme680: Report temperature in millidegrees

[Jonathan Cameron <jic23@kernel.org>]

On Wed,  6 Mar 2019 08:31:47 +0100
Mike Looijmans <mike.looijmans@topic.nl> wrote:

> The standard unit for temperature is millidegrees Celcius. Adapt the
> driver to report in millidegrees instead of degrees.
> 
> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
I tweaked the patch title to make it obvious this was a fix
(added the word fix ;)

Applied to the fixes-togreg branch of iio.git and marked for stable.

Thanks,

Jonathan

> ---
> v2: Remove unused 'addr7' variable                                                       
> v3: Split patch into temperature and SPI
> 
>  drivers/iio/chemical/bme680_core.c | 16 +++++++---------
>  1 file changed, 7 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/iio/chemical/bme680_core.c b/drivers/iio/chemical/bme680_core.c
> index 70c1fe4..fefe32b 100644
> --- a/drivers/iio/chemical/bme680_core.c
> +++ b/drivers/iio/chemical/bme680_core.c
> @@ -583,8 +583,7 @@ static int bme680_gas_config(struct bme680_data *data)
>  	return ret;
>  }
>  
> -static int bme680_read_temp(struct bme680_data *data,
> -			    int *val, int *val2)
> +static int bme680_read_temp(struct bme680_data *data, int *val)
>  {
>  	struct device *dev = regmap_get_device(data->regmap);
>  	int ret;
> @@ -617,10 +616,9 @@ static int bme680_read_temp(struct bme680_data *data,
>  	 * compensate_press/compensate_humid to get compensated
>  	 * pressure/humidity readings.
>  	 */
> -	if (val && val2) {
> -		*val = comp_temp;
> -		*val2 = 100;
> -		return IIO_VAL_FRACTIONAL;
> +	if (val) {
> +		*val = comp_temp * 10; /* Centidegrees to millidegrees */
> +		return IIO_VAL_INT;
>  	}
>  
>  	return ret;
> @@ -635,7 +633,7 @@ static int bme680_read_press(struct bme680_data *data,
>  	s32 adc_press;
>  
>  	/* Read and compensate temperature to get a reading of t_fine */
> -	ret = bme680_read_temp(data, NULL, NULL);
> +	ret = bme680_read_temp(data, NULL);
>  	if (ret < 0)
>  		return ret;
>  
> @@ -668,7 +666,7 @@ static int bme680_read_humid(struct bme680_data *data,
>  	u32 comp_humidity;
>  
>  	/* Read and compensate temperature to get a reading of t_fine */
> -	ret = bme680_read_temp(data, NULL, NULL);
> +	ret = bme680_read_temp(data, NULL);
>  	if (ret < 0)
>  		return ret;
>  
> @@ -761,7 +759,7 @@ static int bme680_read_raw(struct iio_dev *indio_dev,
>  	case IIO_CHAN_INFO_PROCESSED:
>  		switch (chan->type) {
>  		case IIO_TEMP:
> -			return bme680_read_temp(data, val, val2);
> +			return bme680_read_temp(data, val);
>  		case IIO_PRESSURE:
>  			return bme680_read_press(data, val, val2);
>  		case IIO_HUMIDITYRELATIVE: