[PATCH v2 02/19] locking/lockdep: Add description and explanation in lockdep design doc

[Yuyang Du <duyuyang@gmail.com>]

More words are added to lockdep design document regarding key concepts,
which helps people understand the design as well as read the reports.

Signed-off-by: Yuyang Du <duyuyang@gmail.com>
---
 Documentation/locking/lockdep-design.txt | 89 +++++++++++++++++++++++---------
 1 file changed, 64 insertions(+), 25 deletions(-)

diff --git a/Documentation/locking/lockdep-design.txt b/Documentation/locking/lockdep-design.txt
index 49f58a0..621d8f4 100644
--- a/Documentation/locking/lockdep-design.txt
+++ b/Documentation/locking/lockdep-design.txt
@@ -10,56 +10,95 @@ Lock-class
 The basic object the validator operates upon is a 'class' of locks.
 
 A class of locks is a group of locks that are logically the same with
-respect to locking rules, even if the locks may have multiple (possibly
-tens of thousands of) instantiations. For example a lock in the inode
-struct is one class, while each inode has its own instantiation of that
-lock class.
-
-The validator tracks the 'state' of lock-classes, and it tracks
-dependencies between different lock-classes. The validator maintains a
-rolling proof that the state and the dependencies are correct.
-
-Unlike an lock instantiation, the lock-class itself never goes away: when
-a lock-class is used for the first time after bootup it gets registered,
-and all subsequent uses of that lock-class will be attached to this
-lock-class.
+respect to locking rules, even if the locks may have multiple (possibly tens
+of thousands of) instantiations. For example a lock in the inode struct is
+one class, while each inode has its own instantiation of that lock class.
+
+The validator tracks the 'usage state' of lock-classes, and it tracks the
+dependencies between different lock-classes. The dependency can be
+understood as lock order, where L1 -> L2 suggests L1 depends on L2, which
+can also be expressed as a forward dependency (L1 -> L2) or a backward
+dependency (L2 <- L1). From lockdep's perspective, the two locks (L1 and L2)
+are not necessarily related as opposed to in some modules an order must be
+followed. Here it just means that order ever happened. The validator
+maintains a continuing effort to prove that the lock usages and their
+dependencies are correct or the validator will shoot a splat if they are
+potentially incorrect.
+
+Unlike a lock instance, a lock-class itself never goes away: when a
+lock-class's instance is used for the first time after bootup the class gets
+registered, and all (subsequent) instances of that lock-class will be mapped
+to the lock-class.
 
 State
 -----
 
-The validator tracks lock-class usage history into 4 * nSTATEs + 1 separate
-state bits:
+The validator tracks lock-class usage history and divides the usage into
+(4 usages * n STATEs + 1) categories:
 
+Where the 4 usages can be:
 - 'ever held in STATE context'
 - 'ever held as readlock in STATE context'
 - 'ever held with STATE enabled'
 - 'ever held as readlock with STATE enabled'
 
-Where STATE can be either one of (kernel/locking/lockdep_states.h)
- - hardirq
- - softirq
+Where the n STATEs are coded in kernel/locking/lockdep_states.h and as of
+now they include:
+- hardirq
+- softirq
 
+Where the last 1 category is:
 - 'ever used'                                       [ == !unused        ]
 
-When locking rules are violated, these state bits are presented in the
-locking error messages, inside curlies. A contrived example:
+When locking rules are violated, these usage bits are presented in the
+locking error messages, inside curlies, with a total of 2 * n STATEs bits.
+See a contrived example:
 
    modprobe/2287 is trying to acquire lock:
-    (&sio_locks[i].lock){-.-...}, at: [<c02867fd>] mutex_lock+0x21/0x24
+    (&sio_locks[i].lock){-.-.}, at: [<c02867fd>] mutex_lock+0x21/0x24
 
    but task is already holding lock:
-    (&sio_locks[i].lock){-.-...}, at: [<c02867fd>] mutex_lock+0x21/0x24
+    (&sio_locks[i].lock){-.-.}, at: [<c02867fd>] mutex_lock+0x21/0x24
 
 
-The bit position indicates STATE, STATE-read, for each of the states listed
-above, and the character displayed in each indicates:
+For a given lock, the bit positions from left to right indicate the usage
+of the lock and readlock (if exists), for each of the n STATEs listed
+above respectively, and the character displayed at each bit position
+indicates:
 
    '.'  acquired while irqs disabled and not in irq context
    '-'  acquired in irq context
    '+'  acquired with irqs enabled
    '?'  acquired in irq context with irqs enabled.
 
-Unused mutexes cannot be part of the cause of an error.
+The bits are illustrated with an example:
+
+    (&sio_locks[i].lock){-.-.}, at: [<c02867fd>] mutex_lock+0x21/0x24
+                         ||||
+                         ||| \-> softirq disabled and not in softirq context
+                         || \--> acquired in softirq context
+                         | \---> hardirq disabled and not in hardirq context
+                          \----> acquired in hardirq context
+
+
+For a given STATE, whether the lock is ever acquired in that STATE context
+and whether that STATE is enabled yields four possible cases as shown in the
+table below. It is worth noting that the bit character is able to indicate
+which exact case is for the lock as of the reporting time.
+
+   -------------------------------------------------
+  |              | enabled in irq | disabled in irq |
+   -------------------------------------------------
+  | ever in irq  |        ?       |        -        |
+   -------------------------------------------------
+  | never in irq |        +       |        .        |
+   -------------------------------------------------
+
+The character '-' suggests irq is disabled because if otherwise, the
+charactor '?' would have been shown instead. Similar deduction can be
+applied for '+' too.
+
+Unused locks (e.g., mutexes) cannot be part of the cause of an error.
 
 
 Single-lock state rules:
-- 
1.8.3.1