From: Stanislav Fomichev <sdf@google.com>
To: netdev@vger.kernel.org, bpf@vger.kernel.org
Cc: davem@davemloft.net, ast@kernel.org, daniel@iogearbox.net,
simon.horman@netronome.com, willemb@google.com,
peterpenkov96@gmail.com, Stanislav Fomichev <sdf@google.com>
Subject: [RFC bpf-next v2 9/9] net: flow_dissector: pass net argument to the eth_get_headlen
Date: Tue, 19 Mar 2019 15:19:48 -0700 [thread overview]
Message-ID: <20190319221948.170441-10-sdf@google.com> (raw)
In-Reply-To: <20190319221948.170441-1-sdf@google.com>
This is an example and for RFC only, just to show what the end result
would look like. In a proper submission, we need to introduce new
helper and convert each driver one by one to make sure we don't
break 'git bisect'.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2 +-
drivers/net/ethernet/hisilicon/hns/hns_enet.c | 3 ++-
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 3 ++-
drivers/net/ethernet/intel/fm10k/fm10k_main.c | 2 +-
drivers/net/ethernet/intel/i40e/i40e_txrx.c | 3 ++-
drivers/net/ethernet/intel/iavf/iavf_txrx.c | 2 +-
drivers/net/ethernet/intel/ice/ice_txrx.c | 2 +-
drivers/net/ethernet/intel/igb/igb_main.c | 2 +-
drivers/net/ethernet/intel/igc/igc_main.c | 2 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 +-
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 3 ++-
drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 3 ++-
drivers/net/tun.c | 3 ++-
include/linux/etherdevice.h | 2 +-
net/ethernet/eth.c | 5 +++--
15 files changed, 23 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 0bb9d7b3a2b6..664e6392f71d 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -899,7 +899,7 @@ static struct sk_buff *bnxt_rx_page_skb(struct bnxt *bp,
DMA_ATTR_WEAK_ORDERING);
if (unlikely(!payload))
- payload = eth_get_headlen(data_ptr, len);
+ payload = eth_get_headlen(dev_net(bp->dev), data_ptr, len);
skb = napi_alloc_skb(&rxr->bnapi->napi, payload);
if (!skb) {
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
index 60e7d7ae3787..caf075a7449c 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
@@ -603,7 +603,8 @@ static int hns_nic_poll_rx_skb(struct hns_nic_ring_data *ring_data,
} else {
ring->stats.seg_pkt_cnt++;
- pull_len = eth_get_headlen(va, HNS_RX_HEAD_SIZE);
+ pull_len = eth_get_headlen(dev_net(ndev), va,
+ HNS_RX_HEAD_SIZE);
memcpy(__skb_put(skb, pull_len), va,
ALIGN(pull_len, sizeof(long)));
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 1c1f17ec6be2..265bb8e47d48 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -2438,7 +2438,8 @@ static int hns3_alloc_skb(struct hns3_enet_ring *ring, int length,
ring->stats.seg_pkt_cnt++;
u64_stats_update_end(&ring->syncp);
- ring->pull_len = eth_get_headlen(va, HNS3_RX_HEAD_SIZE);
+ ring->pull_len = eth_get_headlen(dev_net(netdev), va,
+ HNS3_RX_HEAD_SIZE);
__skb_put(skb, ring->pull_len);
hns3_nic_reuse_page(skb, ring->frag_num++, ring, ring->pull_len,
desc_cb);
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_main.c b/drivers/net/ethernet/intel/fm10k/fm10k_main.c
index 5a0419421511..d1b4b259b90b 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_main.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_main.c
@@ -278,7 +278,7 @@ static bool fm10k_add_rx_frag(struct fm10k_rx_buffer *rx_buffer,
/* we need the header to contain the greater of either ETH_HLEN or
* 60 bytes if the skb->len is less than 60 for skb_pad.
*/
- pull_len = eth_get_headlen(va, FM10K_RX_HDR_LEN);
+ pull_len = eth_get_headlen(skb_net(skb), va, FM10K_RX_HDR_LEN);
/* align pull length to size of long to optimize memcpy performance */
memcpy(__skb_put(skb, pull_len), va, ALIGN(pull_len, sizeof(long)));
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 6c97667d20ef..9e42a3526360 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -2035,7 +2035,8 @@ static struct sk_buff *i40e_construct_skb(struct i40e_ring *rx_ring,
/* Determine available headroom for copy */
headlen = size;
if (headlen > I40E_RX_HDR_SIZE)
- headlen = eth_get_headlen(xdp->data, I40E_RX_HDR_SIZE);
+ headlen = eth_get_headlen(skb_net(skb), xdp->data,
+ I40E_RX_HDR_SIZE);
/* align pull length to size of long to optimize memcpy performance */
memcpy(__skb_put(skb, headlen), xdp->data,
diff --git a/drivers/net/ethernet/intel/iavf/iavf_txrx.c b/drivers/net/ethernet/intel/iavf/iavf_txrx.c
index 9b4d7cec2e18..d3c7fd521fd7 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_txrx.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_txrx.c
@@ -1315,7 +1315,7 @@ static struct sk_buff *iavf_construct_skb(struct iavf_ring *rx_ring,
/* Determine available headroom for copy */
headlen = size;
if (headlen > IAVF_RX_HDR_SIZE)
- headlen = eth_get_headlen(va, IAVF_RX_HDR_SIZE);
+ headlen = eth_get_headlen(skb_net(skb), va, IAVF_RX_HDR_SIZE);
/* align pull length to size of long to optimize memcpy performance */
memcpy(__skb_put(skb, headlen), va, ALIGN(headlen, sizeof(long)));
diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.c b/drivers/net/ethernet/intel/ice/ice_txrx.c
index c289d97f477d..665ac75bb8ed 100644
--- a/drivers/net/ethernet/intel/ice/ice_txrx.c
+++ b/drivers/net/ethernet/intel/ice/ice_txrx.c
@@ -704,7 +704,7 @@ static void ice_pull_tail(struct sk_buff *skb)
/* we need the header to contain the greater of either ETH_HLEN or
* 60 bytes if the skb->len is less than 60 for skb_pad.
*/
- pull_len = eth_get_headlen(va, ICE_RX_HDR_SIZE);
+ pull_len = eth_get_headlen(skb_net(skb), va, ICE_RX_HDR_SIZE);
/* align pull length to size of long to optimize memcpy performance */
skb_copy_to_linear_data(skb, va, ALIGN(pull_len, sizeof(long)));
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 69b230c53fed..55388c2b72b7 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -8048,7 +8048,7 @@ static struct sk_buff *igb_construct_skb(struct igb_ring *rx_ring,
/* Determine available headroom for copy */
headlen = size;
if (headlen > IGB_RX_HDR_LEN)
- headlen = eth_get_headlen(va, IGB_RX_HDR_LEN);
+ headlen = eth_get_headlen(skb_net(skb), va, IGB_RX_HDR_LEN);
/* align pull length to size of long to optimize memcpy performance */
memcpy(__skb_put(skb, headlen), va, ALIGN(headlen, sizeof(long)));
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 87a11879bf2d..9ea32e9d72c4 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -1150,7 +1150,7 @@ static struct sk_buff *igc_construct_skb(struct igc_ring *rx_ring,
/* Determine available headroom for copy */
headlen = size;
if (headlen > IGC_RX_HDR_LEN)
- headlen = eth_get_headlen(va, IGC_RX_HDR_LEN);
+ headlen = eth_get_headlen(skb_net(skb), va, IGC_RX_HDR_LEN);
/* align pull length to size of long to optimize memcpy performance */
memcpy(__skb_put(skb, headlen), va, ALIGN(headlen, sizeof(long)));
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index e100054a3765..2fd75d761522 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -1800,7 +1800,7 @@ static void ixgbe_pull_tail(struct ixgbe_ring *rx_ring,
* we need the header to contain the greater of either ETH_HLEN or
* 60 bytes if the skb->len is less than 60 for skb_pad.
*/
- pull_len = eth_get_headlen(va, IXGBE_RX_HDR_SIZE);
+ pull_len = eth_get_headlen(skb_net(skb), va, IXGBE_RX_HDR_SIZE);
/* align pull length to size of long to optimize memcpy performance */
skb_copy_to_linear_data(skb, va, ALIGN(pull_len, sizeof(long)));
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 49e23afa05a2..c45be7487d57 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -895,7 +895,8 @@ struct sk_buff *ixgbevf_construct_skb(struct ixgbevf_ring *rx_ring,
/* Determine available headroom for copy */
headlen = size;
if (headlen > IXGBEVF_RX_HDR_SIZE)
- headlen = eth_get_headlen(xdp->data, IXGBEVF_RX_HDR_SIZE);
+ headlen = eth_get_headlen(skb_net(skb), xdp->data,
+ IXGBEVF_RX_HDR_SIZE);
/* align pull length to size of long to optimize memcpy performance */
memcpy(__skb_put(skb, headlen), xdp->data,
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
index 25a8f8260c14..31beb9f92a2b 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
@@ -163,7 +163,8 @@ static inline u16 mlx5e_calc_min_inline(enum mlx5_inline_modes mode,
case MLX5_INLINE_MODE_NONE:
return 0;
case MLX5_INLINE_MODE_TCP_UDP:
- hlen = eth_get_headlen(skb->data, skb_headlen(skb));
+ hlen = eth_get_headlen(skb_net(skb), skb->data,
+ skb_headlen(skb));
if (hlen == ETH_HLEN && !skb_vlan_tag_present(skb))
hlen += VLAN_HLEN;
break;
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index e9ca1c088d0b..dc7e343e4f79 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -1966,7 +1966,8 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile,
if (frags) {
/* Exercise flow dissector code path. */
- u32 headlen = eth_get_headlen(skb->data, skb_headlen(skb));
+ u32 headlen = eth_get_headlen(skb_net(skb), skb->data,
+ skb_headlen(skb));
if (unlikely(headlen > skb_headlen(skb))) {
this_cpu_inc(tun->pcpu_stats->rx_dropped);
diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
index e2f3b21cd72a..782baa417685 100644
--- a/include/linux/etherdevice.h
+++ b/include/linux/etherdevice.h
@@ -33,7 +33,7 @@ struct device;
int eth_platform_get_mac_address(struct device *dev, u8 *mac_addr);
unsigned char *arch_get_platform_mac_address(void);
int nvmem_get_mac_address(struct device *dev, void *addrbuf);
-u32 eth_get_headlen(void *data, unsigned int max_len);
+u32 eth_get_headlen(struct net *net, void *data, unsigned int max_len);
__be16 eth_type_trans(struct sk_buff *skb, struct net_device *dev);
extern const struct header_ops eth_header_ops;
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
index 1e439549c419..a41e87816a48 100644
--- a/net/ethernet/eth.c
+++ b/net/ethernet/eth.c
@@ -119,13 +119,14 @@ EXPORT_SYMBOL(eth_header);
/**
* eth_get_headlen - determine the length of header for an ethernet frame
+ * @net: pointer to device network namespace
* @data: pointer to start of frame
* @len: total length of frame
*
* Make a best effort attempt to pull the length for all of the headers for
* a given frame in a linear buffer.
*/
-u32 eth_get_headlen(void *data, unsigned int len)
+u32 eth_get_headlen(struct net *net, void *data, unsigned int len)
{
const unsigned int flags = FLOW_DISSECTOR_F_PARSE_1ST_FRAG;
const struct ethhdr *eth = (const struct ethhdr *)data;
@@ -136,7 +137,7 @@ u32 eth_get_headlen(void *data, unsigned int len)
return len;
/* parse any remaining L2/L3 headers, check for L4 */
- if (!skb_flow_dissect_flow_keys_basic(NULL, NULL, &keys, data,
+ if (!skb_flow_dissect_flow_keys_basic(net, NULL, &keys, data,
eth->h_proto, sizeof(*eth),
len, flags))
return max_t(u32, keys.control.thoff, sizeof(*eth));
--
2.21.0.225.g810b269d1ac-goog
prev parent reply other threads:[~2019-03-19 22:20 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-19 22:19 [RFC bpf-next v2 0/9] net: flow_dissector: trigger BPF hook when called from eth_get_headlen Stanislav Fomichev
2019-03-19 22:19 ` [RFC bpf-next v2 1/9] net: introduce __init_skb{,_data,_shinfo} helpers Stanislav Fomichev
2019-03-21 3:39 ` Alexei Starovoitov
2019-03-21 4:44 ` Eric Dumazet
2019-03-21 13:58 ` Willem de Bruijn
2019-03-21 15:44 ` Stanislav Fomichev
2019-03-21 16:00 ` Alexei Starovoitov
2019-03-21 16:13 ` Willem de Bruijn
2019-03-21 20:56 ` Alexei Starovoitov
2019-03-21 21:13 ` Stanislav Fomichev
2019-03-19 22:19 ` [RFC bpf-next v2 2/9] net: introduce skb_net helper Stanislav Fomichev
2019-03-20 2:14 ` Willem de Bruijn
2019-03-20 16:49 ` Stanislav Fomichev
2019-03-19 22:19 ` [RFC bpf-next v2 3/9] net: plumb network namespace into __skb_flow_dissect Stanislav Fomichev
2019-03-19 22:19 ` [RFC bpf-next v2 4/9] net: flow_dissector: prepare for no-skb use case Stanislav Fomichev
2019-03-19 22:19 ` [RFC bpf-next v2 5/9] flow_dissector: allow access only to a subset of __sk_buff fields Stanislav Fomichev
2019-03-19 22:19 ` [RFC bpf-next v2 6/9] net: flow_dissector: handle no-skb use case Stanislav Fomichev
2019-03-19 22:19 ` [RFC bpf-next v2 7/9] bpf: when doing BPF_PROG_TEST_RUN for flow dissector use no-skb mode Stanislav Fomichev
2019-03-20 2:14 ` Willem de Bruijn
2019-03-20 16:57 ` Stanislav Fomichev
2019-03-20 18:29 ` Willem de Bruijn
2019-03-20 19:02 ` Stanislav Fomichev
2019-03-20 19:08 ` Willem de Bruijn
2019-03-20 19:19 ` Stanislav Fomichev
2019-03-20 19:23 ` Willem de Bruijn
2019-03-20 19:48 ` Stanislav Fomichev
2019-03-20 20:03 ` Willem de Bruijn
2019-03-19 22:19 ` [RFC bpf-next v2 8/9] selftests/bpf: add flow dissector bpf_skb_load_bytes helper test Stanislav Fomichev
2019-03-19 22:19 ` Stanislav Fomichev [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190319221948.170441-10-sdf@google.com \
--to=sdf@google.com \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=peterpenkov96@gmail.com \
--cc=simon.horman@netronome.com \
--cc=willemb@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.