[U-Boot] Fixing dfu_alt_info field after DM conversion

[Lukasz Majewski <lukma@denx.de>]

Hi Fabio,

> Hi Lukasz,
> 
> Myself and Joris have been working on DM conversion of pico-mx7 and
> the the latest patches are available at:
> https://github.com/jorisoffouga/u-boot/commits/pico-imx7d/convert-dm
> 
> Things are working well so far, except eMMC flashing via DFU.
> 
> The following error is seen we flash u-boot-dtb.img:
> 
> => dfu 0 mmc 0  
> Request would exceed designated area!
> #Deferred dfu_flush() failed!=>
> 
> Joris found a way to fix this problem by doing:
> 
>  #define CONFIG_DFU_ENV_SETTINGS \
>          "dfu_alt_info=" \
>                  "spl raw 0x2 0x400;" \
> -                "u-boot raw 0x8a 0x400;" \
> +                "u-boot raw 0x8a 0x1000;" \

The change is as follows:

It defines the DFU alt setting "u-boot" to be "raw" (LBA addressed) -
starting from 0x8a LBA and with 0x400 * 512B = 512 KiB.

Probably your u-boot is larger than 512 KiB, so you need to increase
the "size" of the alt setting to be written to eMMC.

In short - yes this is an acceptable fix.

>                  "/boot/zImage ext4 0 1;" \
>                  "/boot/imx7d-pico-hobbit.dtb ext4 0 1;" \
>                  "/boot/imx7d-pico-pi.dtb ext4 0 1;" \
> 
> Is this an acceptable fix?
> 
> What does the last field in dfu_alt_info mean?
> 
> Thanks,
> 
> Fabio Estevam




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190323/20df994a/attachment.sig>