* [PATCH v3 2/2] rtc: Add ASPEED RTC driver
@ 2019-03-27 1:02 ` Joel Stanley
0 siblings, 0 replies; 20+ messages in thread
From: Joel Stanley @ 2019-03-27 1:02 UTC (permalink / raw)
To: Alexandre Belloni, Alessandro Zummo, Rob Herring, Mark Rutland
Cc: Andrew Jeffery, linux-rtc, linux-aspeed, linux-arm-kernel,
devicetree
Read and writes the time to the non-battery backed RTC in the ASPEED BMC
system on chip families.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
v3:
- Use %ptR
- Remove spinlock, as callback happen under the rtc_device.ops_lock
v2: Address review from Alexandre
- Use devm_rtc_allocate_device
- Fill in range_min
- Direcly fill in tm struct
- Return EINVAL when RTC is not enabled
v1: https://lore.kernel.org/linux-arm-kernel/20181003133155.27494-2-joel@jms.id.au/
Update kconfig text
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
drivers/rtc/Kconfig | 11 ++++
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-aspeed.c | 138 +++++++++++++++++++++++++++++++++++++++
3 files changed, 150 insertions(+)
create mode 100644 drivers/rtc/rtc-aspeed.c
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index dc0d66e80038..fd1321875cb1 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1841,6 +1841,17 @@ config RTC_DRV_RTD119X
If you say yes here, you get support for the RTD1295 SoC
Real Time Clock.
+config RTC_DRV_ASPEED
+ tristate "ASPEED RTC"
+ depends on OF
+ depends on ARCH_ASPEED || COMPILE_TEST
+ help
+ If you say yes here you get support for the ASPEED BMC SoC real time
+ clocks.
+
+ This driver can also be built as a module, if so, the module
+ will be called "rtc-aspeed".
+
comment "HID Sensor RTC drivers"
config RTC_DRV_HID_SENSOR_TIME
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index fe3962496685..9d997faa2c26 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_RTC_DRV_AC100) += rtc-ac100.o
obj-$(CONFIG_RTC_DRV_ARMADA38X) += rtc-armada38x.o
obj-$(CONFIG_RTC_DRV_AS3722) += rtc-as3722.o
obj-$(CONFIG_RTC_DRV_ASM9260) += rtc-asm9260.o
+obj-$(CONFIG_RTC_DRV_ASPEED) += rtc-aspeed.o
obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o
obj-$(CONFIG_RTC_DRV_AT91SAM9) += rtc-at91sam9.o
obj-$(CONFIG_RTC_DRV_AU1XXX) += rtc-au1xxx.o
diff --git a/drivers/rtc/rtc-aspeed.c b/drivers/rtc/rtc-aspeed.c
new file mode 100644
index 000000000000..bd709feea695
--- /dev/null
+++ b/drivers/rtc/rtc-aspeed.c
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2015 IBM Corp.
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/io.h>
+
+struct aspeed_rtc {
+ struct rtc_device *rtc_dev;
+ void __iomem *base;
+};
+
+#define RTC_TIME 0x00
+#define RTC_YEAR 0x04
+#define RTC_CTRL 0x10
+
+#define RTC_UNLOCK BIT(1)
+#define RTC_ENABLE BIT(0)
+
+static int aspeed_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct aspeed_rtc *rtc = dev_get_drvdata(dev);
+ unsigned int cent, year;
+ unsigned long flags;
+ u32 reg1, reg2;
+
+ if (!(readl(rtc->base + RTC_CTRL) & RTC_ENABLE)) {
+ dev_dbg(dev, "%s failing as rtc disabled\n", __func__);
+ return -EINVAL;
+ }
+
+ do {
+ reg2 = readl(rtc->base + RTC_YEAR);
+ reg1 = readl(rtc->base + RTC_TIME);
+ } while (reg2 != readl(rtc->base + RTC_YEAR));
+
+ tm->tm_mday = (reg1 >> 24) & 0x1f;
+ tm->tm_hour = (reg1 >> 16) & 0x1f;
+ tm->tm_min = (reg1 >> 8) & 0x3f;
+ tm->tm_sec = (reg1 >> 0) & 0x3f;
+
+ cent = (reg2 >> 16) & 0x1f;
+ year = (reg2 >> 8) & 0x7f;
+ tm->tm_mon = ((reg2 >> 0) & 0x0f) - 1;
+ tm->tm_year = year + (cent * 100) - 1900;
+
+ dev_dbg(dev, "%s %ptR", __func__, tm);
+
+ return 0;
+}
+
+static int aspeed_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct aspeed_rtc *rtc = dev_get_drvdata(dev);
+ unsigned long flags;
+ u32 reg1, reg2, ctrl;
+ int year, cent;
+
+ cent = (tm->tm_year + 1900) / 100;
+ year = tm->tm_year % 100;
+
+ reg1 = (tm->tm_mday << 24) | (tm->tm_hour << 16) | (tm->tm_min << 8) |
+ tm->tm_sec;
+
+ reg2 = ((cent & 0x1f) << 16) | ((year & 0x7f) << 8) |
+ ((tm->tm_mon + 1) & 0xf);
+
+ ctrl = readl(rtc->base + RTC_CTRL);
+ writel(ctrl | RTC_UNLOCK, rtc->base + RTC_CTRL);
+
+ writel(reg1, rtc->base + RTC_TIME);
+ writel(reg2, rtc->base + RTC_YEAR);
+
+ /* Re-lock and ensure enable is set now that a time is programmed */
+ writel(ctrl | RTC_ENABLE, rtc->base + RTC_CTRL);
+
+ return 0;
+}
+
+static const struct rtc_class_ops aspeed_rtc_ops = {
+ .read_time = aspeed_rtc_read_time,
+ .set_time = aspeed_rtc_set_time,
+};
+
+static int aspeed_rtc_probe(struct platform_device *pdev)
+{
+ struct aspeed_rtc *rtc;
+ struct resource *res;
+ int ret;
+
+ rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+ if (!rtc)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ rtc->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(rtc->base))
+ return PTR_ERR(rtc->base);
+
+ rtc->rtc_dev = devm_rtc_allocate_device(&pdev->dev);
+ if (IS_ERR(rtc->rtc_dev))
+ return PTR_ERR(rtc->rtc_dev);
+
+ platform_set_drvdata(pdev, rtc);
+
+ rtc->rtc_dev->ops = &aspeed_rtc_ops;
+ rtc->rtc_dev->range_min = RTC_TIMESTAMP_BEGIN_1900;
+ rtc->rtc_dev->range_max = 38814989399LL; /* 3199-12-31 23:59:59 */
+
+ ret = rtc_register_device(rtc->rtc_dev);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static const struct of_device_id aspeed_rtc_match[] = {
+ { .compatible = "aspeed,ast2400-rtc", },
+ { .compatible = "aspeed,ast2500-rtc", },
+ { .compatible = "aspeed,ast2600-rtc", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, aspeed_rtc_match);
+
+static struct platform_driver aspeed_rtc_driver = {
+ .driver = {
+ .name = "aspeed-rtc",
+ .of_match_table = of_match_ptr(aspeed_rtc_match),
+ },
+};
+
+module_platform_driver_probe(aspeed_rtc_driver, aspeed_rtc_probe);
+
+MODULE_DESCRIPTION("ASPEED RTC driver");
+MODULE_AUTHOR("Joel Stanley <joel@jms.id.au>");
+MODULE_LICENSE("GPL");
--
2.20.1
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v3 2/2] rtc: Add ASPEED RTC driver
@ 2019-03-27 1:02 ` Joel Stanley
0 siblings, 0 replies; 20+ messages in thread
From: Joel Stanley @ 2019-03-27 1:02 UTC (permalink / raw)
To: Alexandre Belloni, Alessandro Zummo, Rob Herring, Mark Rutland
Cc: Andrew Jeffery, linux-rtc, linux-aspeed, linux-arm-kernel,
devicetree
Read and writes the time to the non-battery backed RTC in the ASPEED BMC
system on chip families.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
v3:
- Use %ptR
- Remove spinlock, as callback happen under the rtc_device.ops_lock
v2: Address review from Alexandre
- Use devm_rtc_allocate_device
- Fill in range_min
- Direcly fill in tm struct
- Return EINVAL when RTC is not enabled
v1: https://lore.kernel.org/linux-arm-kernel/20181003133155.27494-2-joel@jms.id.au/
Update kconfig text
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
drivers/rtc/Kconfig | 11 ++++
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-aspeed.c | 138 +++++++++++++++++++++++++++++++++++++++
3 files changed, 150 insertions(+)
create mode 100644 drivers/rtc/rtc-aspeed.c
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index dc0d66e80038..fd1321875cb1 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1841,6 +1841,17 @@ config RTC_DRV_RTD119X
If you say yes here, you get support for the RTD1295 SoC
Real Time Clock.
+config RTC_DRV_ASPEED
+ tristate "ASPEED RTC"
+ depends on OF
+ depends on ARCH_ASPEED || COMPILE_TEST
+ help
+ If you say yes here you get support for the ASPEED BMC SoC real time
+ clocks.
+
+ This driver can also be built as a module, if so, the module
+ will be called "rtc-aspeed".
+
comment "HID Sensor RTC drivers"
config RTC_DRV_HID_SENSOR_TIME
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index fe3962496685..9d997faa2c26 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_RTC_DRV_AC100) += rtc-ac100.o
obj-$(CONFIG_RTC_DRV_ARMADA38X) += rtc-armada38x.o
obj-$(CONFIG_RTC_DRV_AS3722) += rtc-as3722.o
obj-$(CONFIG_RTC_DRV_ASM9260) += rtc-asm9260.o
+obj-$(CONFIG_RTC_DRV_ASPEED) += rtc-aspeed.o
obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o
obj-$(CONFIG_RTC_DRV_AT91SAM9) += rtc-at91sam9.o
obj-$(CONFIG_RTC_DRV_AU1XXX) += rtc-au1xxx.o
diff --git a/drivers/rtc/rtc-aspeed.c b/drivers/rtc/rtc-aspeed.c
new file mode 100644
index 000000000000..bd709feea695
--- /dev/null
+++ b/drivers/rtc/rtc-aspeed.c
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2015 IBM Corp.
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/io.h>
+
+struct aspeed_rtc {
+ struct rtc_device *rtc_dev;
+ void __iomem *base;
+};
+
+#define RTC_TIME 0x00
+#define RTC_YEAR 0x04
+#define RTC_CTRL 0x10
+
+#define RTC_UNLOCK BIT(1)
+#define RTC_ENABLE BIT(0)
+
+static int aspeed_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct aspeed_rtc *rtc = dev_get_drvdata(dev);
+ unsigned int cent, year;
+ unsigned long flags;
+ u32 reg1, reg2;
+
+ if (!(readl(rtc->base + RTC_CTRL) & RTC_ENABLE)) {
+ dev_dbg(dev, "%s failing as rtc disabled\n", __func__);
+ return -EINVAL;
+ }
+
+ do {
+ reg2 = readl(rtc->base + RTC_YEAR);
+ reg1 = readl(rtc->base + RTC_TIME);
+ } while (reg2 != readl(rtc->base + RTC_YEAR));
+
+ tm->tm_mday = (reg1 >> 24) & 0x1f;
+ tm->tm_hour = (reg1 >> 16) & 0x1f;
+ tm->tm_min = (reg1 >> 8) & 0x3f;
+ tm->tm_sec = (reg1 >> 0) & 0x3f;
+
+ cent = (reg2 >> 16) & 0x1f;
+ year = (reg2 >> 8) & 0x7f;
+ tm->tm_mon = ((reg2 >> 0) & 0x0f) - 1;
+ tm->tm_year = year + (cent * 100) - 1900;
+
+ dev_dbg(dev, "%s %ptR", __func__, tm);
+
+ return 0;
+}
+
+static int aspeed_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct aspeed_rtc *rtc = dev_get_drvdata(dev);
+ unsigned long flags;
+ u32 reg1, reg2, ctrl;
+ int year, cent;
+
+ cent = (tm->tm_year + 1900) / 100;
+ year = tm->tm_year % 100;
+
+ reg1 = (tm->tm_mday << 24) | (tm->tm_hour << 16) | (tm->tm_min << 8) |
+ tm->tm_sec;
+
+ reg2 = ((cent & 0x1f) << 16) | ((year & 0x7f) << 8) |
+ ((tm->tm_mon + 1) & 0xf);
+
+ ctrl = readl(rtc->base + RTC_CTRL);
+ writel(ctrl | RTC_UNLOCK, rtc->base + RTC_CTRL);
+
+ writel(reg1, rtc->base + RTC_TIME);
+ writel(reg2, rtc->base + RTC_YEAR);
+
+ /* Re-lock and ensure enable is set now that a time is programmed */
+ writel(ctrl | RTC_ENABLE, rtc->base + RTC_CTRL);
+
+ return 0;
+}
+
+static const struct rtc_class_ops aspeed_rtc_ops = {
+ .read_time = aspeed_rtc_read_time,
+ .set_time = aspeed_rtc_set_time,
+};
+
+static int aspeed_rtc_probe(struct platform_device *pdev)
+{
+ struct aspeed_rtc *rtc;
+ struct resource *res;
+ int ret;
+
+ rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+ if (!rtc)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ rtc->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(rtc->base))
+ return PTR_ERR(rtc->base);
+
+ rtc->rtc_dev = devm_rtc_allocate_device(&pdev->dev);
+ if (IS_ERR(rtc->rtc_dev))
+ return PTR_ERR(rtc->rtc_dev);
+
+ platform_set_drvdata(pdev, rtc);
+
+ rtc->rtc_dev->ops = &aspeed_rtc_ops;
+ rtc->rtc_dev->range_min = RTC_TIMESTAMP_BEGIN_1900;
+ rtc->rtc_dev->range_max = 38814989399LL; /* 3199-12-31 23:59:59 */
+
+ ret = rtc_register_device(rtc->rtc_dev);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static const struct of_device_id aspeed_rtc_match[] = {
+ { .compatible = "aspeed,ast2400-rtc", },
+ { .compatible = "aspeed,ast2500-rtc", },
+ { .compatible = "aspeed,ast2600-rtc", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, aspeed_rtc_match);
+
+static struct platform_driver aspeed_rtc_driver = {
+ .driver = {
+ .name = "aspeed-rtc",
+ .of_match_table = of_match_ptr(aspeed_rtc_match),
+ },
+};
+
+module_platform_driver_probe(aspeed_rtc_driver, aspeed_rtc_probe);
+
+MODULE_DESCRIPTION("ASPEED RTC driver");
+MODULE_AUTHOR("Joel Stanley <joel@jms.id.au>");
+MODULE_LICENSE("GPL");
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v3 2/2] rtc: Add ASPEED RTC driver
@ 2019-03-27 1:02 ` Joel Stanley
0 siblings, 0 replies; 20+ messages in thread
From: Joel Stanley @ 2019-03-27 1:02 UTC (permalink / raw)
To: Alexandre Belloni, Alessandro Zummo, Rob Herring, Mark Rutland
Cc: Andrew Jeffery, linux-rtc, devicetree, linux-arm-kernel,
linux-aspeed
Read and writes the time to the non-battery backed RTC in the ASPEED BMC
system on chip families.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
v3:
- Use %ptR
- Remove spinlock, as callback happen under the rtc_device.ops_lock
v2: Address review from Alexandre
- Use devm_rtc_allocate_device
- Fill in range_min
- Direcly fill in tm struct
- Return EINVAL when RTC is not enabled
v1: https://lore.kernel.org/linux-arm-kernel/20181003133155.27494-2-joel@jms.id.au/
Update kconfig text
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
drivers/rtc/Kconfig | 11 ++++
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-aspeed.c | 138 +++++++++++++++++++++++++++++++++++++++
3 files changed, 150 insertions(+)
create mode 100644 drivers/rtc/rtc-aspeed.c
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index dc0d66e80038..fd1321875cb1 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1841,6 +1841,17 @@ config RTC_DRV_RTD119X
If you say yes here, you get support for the RTD1295 SoC
Real Time Clock.
+config RTC_DRV_ASPEED
+ tristate "ASPEED RTC"
+ depends on OF
+ depends on ARCH_ASPEED || COMPILE_TEST
+ help
+ If you say yes here you get support for the ASPEED BMC SoC real time
+ clocks.
+
+ This driver can also be built as a module, if so, the module
+ will be called "rtc-aspeed".
+
comment "HID Sensor RTC drivers"
config RTC_DRV_HID_SENSOR_TIME
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index fe3962496685..9d997faa2c26 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_RTC_DRV_AC100) += rtc-ac100.o
obj-$(CONFIG_RTC_DRV_ARMADA38X) += rtc-armada38x.o
obj-$(CONFIG_RTC_DRV_AS3722) += rtc-as3722.o
obj-$(CONFIG_RTC_DRV_ASM9260) += rtc-asm9260.o
+obj-$(CONFIG_RTC_DRV_ASPEED) += rtc-aspeed.o
obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o
obj-$(CONFIG_RTC_DRV_AT91SAM9) += rtc-at91sam9.o
obj-$(CONFIG_RTC_DRV_AU1XXX) += rtc-au1xxx.o
diff --git a/drivers/rtc/rtc-aspeed.c b/drivers/rtc/rtc-aspeed.c
new file mode 100644
index 000000000000..bd709feea695
--- /dev/null
+++ b/drivers/rtc/rtc-aspeed.c
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2015 IBM Corp.
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/io.h>
+
+struct aspeed_rtc {
+ struct rtc_device *rtc_dev;
+ void __iomem *base;
+};
+
+#define RTC_TIME 0x00
+#define RTC_YEAR 0x04
+#define RTC_CTRL 0x10
+
+#define RTC_UNLOCK BIT(1)
+#define RTC_ENABLE BIT(0)
+
+static int aspeed_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct aspeed_rtc *rtc = dev_get_drvdata(dev);
+ unsigned int cent, year;
+ unsigned long flags;
+ u32 reg1, reg2;
+
+ if (!(readl(rtc->base + RTC_CTRL) & RTC_ENABLE)) {
+ dev_dbg(dev, "%s failing as rtc disabled\n", __func__);
+ return -EINVAL;
+ }
+
+ do {
+ reg2 = readl(rtc->base + RTC_YEAR);
+ reg1 = readl(rtc->base + RTC_TIME);
+ } while (reg2 != readl(rtc->base + RTC_YEAR));
+
+ tm->tm_mday = (reg1 >> 24) & 0x1f;
+ tm->tm_hour = (reg1 >> 16) & 0x1f;
+ tm->tm_min = (reg1 >> 8) & 0x3f;
+ tm->tm_sec = (reg1 >> 0) & 0x3f;
+
+ cent = (reg2 >> 16) & 0x1f;
+ year = (reg2 >> 8) & 0x7f;
+ tm->tm_mon = ((reg2 >> 0) & 0x0f) - 1;
+ tm->tm_year = year + (cent * 100) - 1900;
+
+ dev_dbg(dev, "%s %ptR", __func__, tm);
+
+ return 0;
+}
+
+static int aspeed_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct aspeed_rtc *rtc = dev_get_drvdata(dev);
+ unsigned long flags;
+ u32 reg1, reg2, ctrl;
+ int year, cent;
+
+ cent = (tm->tm_year + 1900) / 100;
+ year = tm->tm_year % 100;
+
+ reg1 = (tm->tm_mday << 24) | (tm->tm_hour << 16) | (tm->tm_min << 8) |
+ tm->tm_sec;
+
+ reg2 = ((cent & 0x1f) << 16) | ((year & 0x7f) << 8) |
+ ((tm->tm_mon + 1) & 0xf);
+
+ ctrl = readl(rtc->base + RTC_CTRL);
+ writel(ctrl | RTC_UNLOCK, rtc->base + RTC_CTRL);
+
+ writel(reg1, rtc->base + RTC_TIME);
+ writel(reg2, rtc->base + RTC_YEAR);
+
+ /* Re-lock and ensure enable is set now that a time is programmed */
+ writel(ctrl | RTC_ENABLE, rtc->base + RTC_CTRL);
+
+ return 0;
+}
+
+static const struct rtc_class_ops aspeed_rtc_ops = {
+ .read_time = aspeed_rtc_read_time,
+ .set_time = aspeed_rtc_set_time,
+};
+
+static int aspeed_rtc_probe(struct platform_device *pdev)
+{
+ struct aspeed_rtc *rtc;
+ struct resource *res;
+ int ret;
+
+ rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+ if (!rtc)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ rtc->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(rtc->base))
+ return PTR_ERR(rtc->base);
+
+ rtc->rtc_dev = devm_rtc_allocate_device(&pdev->dev);
+ if (IS_ERR(rtc->rtc_dev))
+ return PTR_ERR(rtc->rtc_dev);
+
+ platform_set_drvdata(pdev, rtc);
+
+ rtc->rtc_dev->ops = &aspeed_rtc_ops;
+ rtc->rtc_dev->range_min = RTC_TIMESTAMP_BEGIN_1900;
+ rtc->rtc_dev->range_max = 38814989399LL; /* 3199-12-31 23:59:59 */
+
+ ret = rtc_register_device(rtc->rtc_dev);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static const struct of_device_id aspeed_rtc_match[] = {
+ { .compatible = "aspeed,ast2400-rtc", },
+ { .compatible = "aspeed,ast2500-rtc", },
+ { .compatible = "aspeed,ast2600-rtc", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, aspeed_rtc_match);
+
+static struct platform_driver aspeed_rtc_driver = {
+ .driver = {
+ .name = "aspeed-rtc",
+ .of_match_table = of_match_ptr(aspeed_rtc_match),
+ },
+};
+
+module_platform_driver_probe(aspeed_rtc_driver, aspeed_rtc_probe);
+
+MODULE_DESCRIPTION("ASPEED RTC driver");
+MODULE_AUTHOR("Joel Stanley <joel@jms.id.au>");
+MODULE_LICENSE("GPL");
--
2.20.1
^ permalink raw reply related [flat|nested] 20+ messages in thread* [PATCH v3 2/2] rtc: Add ASPEED RTC driver
2019-03-27 1:02 ` Joel Stanley
(?)
(?)
@ 2019-03-27 10:37 ` Alexandre Belloni
-1 siblings, 0 replies; 20+ messages in thread
From: Alexandre Belloni @ 2019-03-27 10:37 UTC (permalink / raw)
To: linux-aspeed
On 27/03/2019 11:32:15+1030, Joel Stanley wrote:
> Read and writes the time to the non-battery backed RTC in the ASPEED BMC
> system on chip families.
>
> Signed-off-by: Joel Stanley <joel@jms.id.au>
> ---
> v3:
> - Use %ptR
> - Remove spinlock, as callback happen under the rtc_device.ops_lock
> v2: Address review from Alexandre
> - Use devm_rtc_allocate_device
> - Fill in range_min
> - Direcly fill in tm struct
> - Return EINVAL when RTC is not enabled
>
> v1: https://lore.kernel.org/linux-arm-kernel/20181003133155.27494-2-joel at jms.id.au/
>
> Update kconfig text
>
> Signed-off-by: Joel Stanley <joel@jms.id.au>
> ---
> drivers/rtc/Kconfig | 11 ++++
> drivers/rtc/Makefile | 1 +
> drivers/rtc/rtc-aspeed.c | 138 +++++++++++++++++++++++++++++++++++++++
> 3 files changed, 150 insertions(+)
> create mode 100644 drivers/rtc/rtc-aspeed.c
>
Applied, thanks.
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v3 2/2] rtc: Add ASPEED RTC driver
@ 2019-03-27 10:37 ` Alexandre Belloni
0 siblings, 0 replies; 20+ messages in thread
From: Alexandre Belloni @ 2019-03-27 10:37 UTC (permalink / raw)
To: Joel Stanley
Cc: Mark Rutland, Alessandro Zummo, linux-aspeed, devicetree,
Andrew Jeffery, Rob Herring, linux-arm-kernel, linux-rtc
On 27/03/2019 11:32:15+1030, Joel Stanley wrote:
> Read and writes the time to the non-battery backed RTC in the ASPEED BMC
> system on chip families.
>
> Signed-off-by: Joel Stanley <joel@jms.id.au>
> ---
> v3:
> - Use %ptR
> - Remove spinlock, as callback happen under the rtc_device.ops_lock
> v2: Address review from Alexandre
> - Use devm_rtc_allocate_device
> - Fill in range_min
> - Direcly fill in tm struct
> - Return EINVAL when RTC is not enabled
>
> v1: https://lore.kernel.org/linux-arm-kernel/20181003133155.27494-2-joel@jms.id.au/
>
> Update kconfig text
>
> Signed-off-by: Joel Stanley <joel@jms.id.au>
> ---
> drivers/rtc/Kconfig | 11 ++++
> drivers/rtc/Makefile | 1 +
> drivers/rtc/rtc-aspeed.c | 138 +++++++++++++++++++++++++++++++++++++++
> 3 files changed, 150 insertions(+)
> create mode 100644 drivers/rtc/rtc-aspeed.c
>
Applied, thanks.
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v3 2/2] rtc: Add ASPEED RTC driver
@ 2019-03-27 10:37 ` Alexandre Belloni
0 siblings, 0 replies; 20+ messages in thread
From: Alexandre Belloni @ 2019-03-27 10:37 UTC (permalink / raw)
To: Joel Stanley
Cc: Mark Rutland, Alessandro Zummo, linux-aspeed, devicetree,
Andrew Jeffery, Rob Herring, linux-arm-kernel, linux-rtc
On 27/03/2019 11:32:15+1030, Joel Stanley wrote:
> Read and writes the time to the non-battery backed RTC in the ASPEED BMC
> system on chip families.
>
> Signed-off-by: Joel Stanley <joel@jms.id.au>
> ---
> v3:
> - Use %ptR
> - Remove spinlock, as callback happen under the rtc_device.ops_lock
> v2: Address review from Alexandre
> - Use devm_rtc_allocate_device
> - Fill in range_min
> - Direcly fill in tm struct
> - Return EINVAL when RTC is not enabled
>
> v1: https://lore.kernel.org/linux-arm-kernel/20181003133155.27494-2-joel@jms.id.au/
>
> Update kconfig text
>
> Signed-off-by: Joel Stanley <joel@jms.id.au>
> ---
> drivers/rtc/Kconfig | 11 ++++
> drivers/rtc/Makefile | 1 +
> drivers/rtc/rtc-aspeed.c | 138 +++++++++++++++++++++++++++++++++++++++
> 3 files changed, 150 insertions(+)
> create mode 100644 drivers/rtc/rtc-aspeed.c
>
Applied, thanks.
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v3 2/2] rtc: Add ASPEED RTC driver
@ 2019-03-27 10:37 ` Alexandre Belloni
0 siblings, 0 replies; 20+ messages in thread
From: Alexandre Belloni @ 2019-03-27 10:37 UTC (permalink / raw)
To: Joel Stanley
Cc: Alessandro Zummo, Rob Herring, Mark Rutland, Andrew Jeffery,
linux-rtc, devicetree, linux-arm-kernel, linux-aspeed
On 27/03/2019 11:32:15+1030, Joel Stanley wrote:
> Read and writes the time to the non-battery backed RTC in the ASPEED BMC
> system on chip families.
>
> Signed-off-by: Joel Stanley <joel@jms.id.au>
> ---
> v3:
> - Use %ptR
> - Remove spinlock, as callback happen under the rtc_device.ops_lock
> v2: Address review from Alexandre
> - Use devm_rtc_allocate_device
> - Fill in range_min
> - Direcly fill in tm struct
> - Return EINVAL when RTC is not enabled
>
> v1: https://lore.kernel.org/linux-arm-kernel/20181003133155.27494-2-joel@jms.id.au/
>
> Update kconfig text
>
> Signed-off-by: Joel Stanley <joel@jms.id.au>
> ---
> drivers/rtc/Kconfig | 11 ++++
> drivers/rtc/Makefile | 1 +
> drivers/rtc/rtc-aspeed.c | 138 +++++++++++++++++++++++++++++++++++++++
> 3 files changed, 150 insertions(+)
> create mode 100644 drivers/rtc/rtc-aspeed.c
>
Applied, thanks.
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 20+ messages in thread