From: Sean Christopherson <sean.j.christopherson@intel.com>
To: Yang Weijiang <weijiang.yang@intel.com>
Cc: pbonzini@redhat.com, kvm@vger.kernel.org, mst@redhat.com,
rkrcmar@redhat.com, jmattson@google.com,
linux-kernel@vger.kernel.org, yu-cheng.yu@intel.com
Subject: Re: [RFC PATCH v4 7/8] KVM:x86: load guest fpu state when accessing MSRs managed by XSAVES
Date: Tue, 2 Apr 2019 13:39:50 -0700 [thread overview]
Message-ID: <20190402203950.GL31303@linux.intel.com> (raw)
In-Reply-To: <20190318150351.15550-8-weijiang.yang@intel.com>
On Mon, Mar 18, 2019 at 11:03:50PM +0800, Yang Weijiang wrote:
> From: Sean Christopherson <sean.j.christopherson@intel.com>
>
> A handful of CET MSRs are not context switched through "traditional"
> methods, e.g. VMCS or manual switching, but rather are passed through
> to the guest and are saved and restored by XSAVES/XRSTORS, i.e. the
> guest's FPU state.
>
> Load the guest's FPU state if userspace is accessing MSRs whose values
> are managed by XSAVES so that the MSR helper, e.g. vmx_{get,set}_msr(),
> can simply do {RD,WR}MSR to access the guest's value.
>
> Note that guest_cpuid_has() is not queried as host userspace is allowed
> to access MSRs that have not been exposed to the guest, e.g. it might do
> KVM_SET_MSRS prior to KVM_SET_CPUID2.
>
> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
> Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Needs Co-developed-by: since you made modifications to the patch I sent.
> ---
> arch/x86/kvm/x86.c | 32 +++++++++++++++++++++++++++++++-
> 1 file changed, 31 insertions(+), 1 deletion(-)
>
> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index a0f8b71b2132..ed747dfbff69 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
> @@ -104,6 +104,8 @@ static void enter_smm(struct kvm_vcpu *vcpu);
> static void __kvm_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags);
> static void store_regs(struct kvm_vcpu *vcpu);
> static int sync_regs(struct kvm_vcpu *vcpu);
> +static void kvm_load_guest_fpu(struct kvm_vcpu *vcpu);
> +static void kvm_put_guest_fpu(struct kvm_vcpu *vcpu);
>
> struct kvm_x86_ops *kvm_x86_ops __read_mostly;
> EXPORT_SYMBOL_GPL(kvm_x86_ops);
> @@ -2889,6 +2891,12 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
> }
> EXPORT_SYMBOL_GPL(kvm_get_msr_common);
>
> +static bool is_xsaves_msr(u32 index)
> +{
> + return index == MSR_IA32_U_CET ||
> + (index >= MSR_IA32_PL0_SSP && index <= MSR_IA32_PL3_SSP);
> +}
> +
> /*
> * Read or write a bunch of msrs. All parameters are kernel addresses.
> *
> @@ -2899,11 +2907,33 @@ static int __msr_io(struct kvm_vcpu *vcpu, struct kvm_msrs *msrs,
> int (*do_msr)(struct kvm_vcpu *vcpu,
> unsigned index, u64 *data))
> {
> + bool fpu_loaded = false;
> + bool xss_loaded = false;
> int i;
> + u64 cet_bits = XFEATURE_MASK_SHSTK_USER | XFEATURE_MASK_SHSTK_KERNEL;
> + u64 host_xss = 0;
> +
> + for (i = 0; i < msrs->nmsrs; ++i) {
> + if (!fpu_loaded && is_xsaves_msr(entries[i].index)) {
> + if (!kvm_x86_ops->xsaves_supported())
> + continue;
> +
> + if (!xss_loaded) {
> + rdmsrl(MSR_IA32_XSS, host_xss);
Rather than do rdmsr(), we can query host_xss via kvm_x86_ops, e.g.:
if (!kvm_x86_ops->xsaves_supported() ||
!kvm_x86_ops->supported_xss())
continue;
> + xss_loaded = true;
> + }
> +
> + if ((host_xss & cet_bits) != cet_bits)
> + continue;
>
> - for (i = 0; i < msrs->nmsrs; ++i)
> + kvm_load_guest_fpu(vcpu);
> + fpu_loaded = true;
> + }
> if (do_msr(vcpu, entries[i].index, &entries[i].data))
> break;
> + }
> + if (fpu_loaded)
> + kvm_put_guest_fpu(vcpu);
>
> return i;
> }
> --
> 2.17.1
>
next prev parent reply other threads:[~2019-04-02 20:39 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-18 15:03 [RFC PATCH v4 0/8] This patch-set is to enable Guest CET support Yang Weijiang
2019-03-18 15:03 ` [RFC PATCH v4 1/8] KVM:VMX: Define CET VMCS fields and bits Yang Weijiang
2019-04-02 19:57 ` Sean Christopherson
2019-03-18 15:03 ` [RFC PATCH v4 2/8] KVM:CPUID: Add CET CPUID support for Guest Yang Weijiang
2019-04-02 20:21 ` Sean Christopherson
2019-04-02 20:40 ` Sean Christopherson
2019-03-18 15:03 ` [RFC PATCH v4 3/8] KVM:CPUID: Fix xsaves area size calculation for CPUID.(EAX=0xD,ECX=1) Yang Weijiang
2019-04-02 20:27 ` Sean Christopherson
2019-03-18 15:03 ` [RFC PATCH v4 4/8] KVM:VMX: Pass through host CET related MSRs to Guest Yang Weijiang
2019-04-02 20:27 ` Sean Christopherson
2019-04-02 20:46 ` Yang Weijiang
2019-03-18 15:03 ` [RFC PATCH v4 5/8] KVM:VMX: Load Guest CET via VMCS when CET is enabled in Guest Yang Weijiang
2019-04-02 20:30 ` Sean Christopherson
2019-03-18 15:03 ` [RFC PATCH v4 6/8] KVM:x86: Allow Guest to set supported bits in XSS Yang Weijiang
2019-03-18 15:03 ` [RFC PATCH v4 7/8] KVM:x86: load guest fpu state when accessing MSRs managed by XSAVES Yang Weijiang
2019-04-02 20:39 ` Sean Christopherson [this message]
2019-03-18 15:03 ` [RFC PATCH v4 8/8] KVM:x86: Add user-space read/write interface for CET MSRs Yang Weijiang
2019-04-02 20:35 ` Sean Christopherson
2019-03-25 20:45 ` [RFC PATCH v4 0/8] This patch-set is to enable Guest CET support Yang Weijiang
2019-03-26 22:31 ` Sean Christopherson
2019-04-02 20:10 ` Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190402203950.GL31303@linux.intel.com \
--to=sean.j.christopherson@intel.com \
--cc=jmattson@google.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=rkrcmar@redhat.com \
--cc=weijiang.yang@intel.com \
--cc=yu-cheng.yu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.