All of lore.kernel.org
 help / color / mirror / Atom feed
From: John Crispin <john@phrozen.org>
To: Johannes Berg <johannes@sipsolutions.net>,
	Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org,
	Srini Kode <skode@qti.qualcomm.com>,
	Rajkumar Manoharan <rmanohar@qti.qualcomm.com>,
	Shashidhar Lakkavalli <slakkavalli@datto.com>,
	Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>,
	John Crispin <john@phrozen.org>
Subject: [RFC V4 2/2] ath10k: add tx hw 802.11 encapusaltion offloading support
Date: Wed, 10 Apr 2019 09:35:14 +0200	[thread overview]
Message-ID: <20190410073514.12794-3-john@phrozen.org> (raw)
In-Reply-To: <20190410073514.12794-1-john@phrozen.org>

From: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>

This patch adds support for ethernet rxtx mode to the driver. The feature
is enabled via a new module parameter. If enabled to driver will enable
the feature on a per vif basis if all other requirements were met.

Testing on a IPQ4019 based hardware shows a increase in TCP throughput
of ~20% when the feature is enabled.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Signed-off-by: John Crispin <john@phrozen.org>
---
 drivers/net/wireless/ath/ath10k/core.c   | 11 +++++
 drivers/net/wireless/ath/ath10k/core.h   |  3 ++
 drivers/net/wireless/ath/ath10k/htt_tx.c | 24 +++++++----
 drivers/net/wireless/ath/ath10k/mac.c    | 70 +++++++++++++++++++++++++-------
 drivers/net/wireless/ath/ath10k/txrx.c   | 11 ++++-
 5 files changed, 94 insertions(+), 25 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index ac2cf3f1c7b4..e3db98df806d 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -30,6 +30,7 @@ static unsigned int ath10k_cryptmode_param;
 static bool uart_print;
 static bool skip_otp;
 static bool rawmode;
+static bool ethernetmode;
 
 unsigned long ath10k_coredump_mask = BIT(ATH10K_FW_CRASH_DUMP_REGISTERS) |
 				     BIT(ATH10K_FW_CRASH_DUMP_CE_DATA);
@@ -41,6 +42,7 @@ module_param(uart_print, bool, 0644);
 module_param(skip_otp, bool, 0644);
 module_param(rawmode, bool, 0644);
 module_param_named(coredump_mask, ath10k_coredump_mask, ulong, 0444);
+module_param(ethernetmode, bool, 0644);
 
 MODULE_PARM_DESC(debug_mask, "Debugging mask");
 MODULE_PARM_DESC(uart_print, "Uart target debugging");
@@ -48,6 +50,7 @@ MODULE_PARM_DESC(skip_otp, "Skip otp failure for calibration in testmode");
 MODULE_PARM_DESC(cryptmode, "Crypto mode: 0-hardware, 1-software");
 MODULE_PARM_DESC(rawmode, "Use raw 802.11 frame datapath");
 MODULE_PARM_DESC(coredump_mask, "Bitfield of what to include in firmware crash file");
+MODULE_PARM_DESC(ethernetmode, "Use ethernet frame datapath");
 
 static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 	{
@@ -2926,6 +2929,14 @@ static void ath10k_core_register_work(struct work_struct *work)
 	/* peer stats are enabled by default */
 	set_bit(ATH10K_FLAG_PEER_STATS, &ar->dev_flags);
 
+	if (ethernetmode && rawmode) {
+		ath10k_err(ar, "ethernet and raw mode cannot co-exist\n");
+		status = -EINVAL;
+		goto err;
+	}
+
+	ar->ethernetmode = ethernetmode;
+
 	status = ath10k_core_probe_fw(ar);
 	if (status) {
 		ath10k_err(ar, "could not probe fw (%d)\n", status);
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 27ec5557de88..30199a2d66b4 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -109,6 +109,7 @@ enum ath10k_skb_flags {
 	ATH10K_SKB_F_MGMT = BIT(3),
 	ATH10K_SKB_F_QOS = BIT(4),
 	ATH10K_SKB_F_RAW_TX = BIT(5),
+	ATH10K_SKB_F_HW_80211_ENCAP = BIT(6),
 };
 
 struct ath10k_skb_cb {
@@ -1187,6 +1188,8 @@ struct ath10k {
 	struct work_struct radar_confirmation_work;
 	struct ath10k_bus_params bus_param;
 
+	bool ethernetmode;
+
 	/* must be last */
 	u8 drv_priv[0] __aligned(sizeof(void *));
 };
diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index d8e9cc0bb772..ae4c48b8b706 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -1143,6 +1143,10 @@ static u8 ath10k_htt_tx_get_tid(struct sk_buff *skb, bool is_eth)
 	struct ieee80211_hdr *hdr = (void *)skb->data;
 	struct ath10k_skb_cb *cb = ATH10K_SKB_CB(skb);
 
+	/* Firmware takes care of tid classification for ethernet format */
+	if (cb->flags & ATH10K_SKB_F_HW_80211_ENCAP)
+		return skb->priority % IEEE80211_QOS_CTL_TID_MASK;
+
 	if (!is_eth && ieee80211_is_mgmt(hdr->frame_control))
 		return HTT_DATA_TX_EXT_TID_MGMT;
 	else if (cb->flags & ATH10K_SKB_F_QOS)
@@ -1351,15 +1355,17 @@ static int ath10k_htt_tx_32(struct ath10k_htt *htt,
 	txbuf_paddr = htt->txbuf.paddr +
 		      (sizeof(struct ath10k_htt_txbuf_32) * msdu_id);
 
-	if ((ieee80211_is_action(hdr->frame_control) ||
-	     ieee80211_is_deauth(hdr->frame_control) ||
-	     ieee80211_is_disassoc(hdr->frame_control)) &&
-	     ieee80211_has_protected(hdr->frame_control)) {
-		skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
-	} else if (!(skb_cb->flags & ATH10K_SKB_F_NO_HWCRYPT) &&
-		   txmode == ATH10K_HW_TXRX_RAW &&
-		   ieee80211_has_protected(hdr->frame_control)) {
-		skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+	if (!(info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP)) {
+		if ((ieee80211_is_action(hdr->frame_control) ||
+		     ieee80211_is_deauth(hdr->frame_control) ||
+		     ieee80211_is_disassoc(hdr->frame_control)) &&
+		    ieee80211_has_protected(hdr->frame_control)) {
+			skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+		} else if (!(skb_cb->flags & ATH10K_SKB_F_NO_HWCRYPT) &&
+			   txmode == ATH10K_HW_TXRX_RAW &&
+			   ieee80211_has_protected(hdr->frame_control)) {
+			skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+		}
 	}
 
 	skb_cb->paddr = dma_map_single(dev, msdu->data, msdu->len,
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index b73c23d4ce86..893296152c22 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3386,12 +3386,16 @@ ath10k_mac_tx_h_get_txmode(struct ath10k *ar,
 			   struct sk_buff *skb)
 {
 	const struct ieee80211_hdr *hdr = (void *)skb->data;
+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	const struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(skb);
 	__le16 fc = hdr->frame_control;
 
 	if (!vif || vif->type == NL80211_IFTYPE_MONITOR)
 		return ATH10K_HW_TXRX_RAW;
 
+	if (tx_info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP)
+		return ATH10K_HW_TXRX_ETHERNET;
+
 	if (ieee80211_is_mgmt(fc))
 		return ATH10K_HW_TXRX_MGMT;
 
@@ -3544,6 +3548,15 @@ static void ath10k_mac_tx_h_fill_cb(struct ath10k *ar,
 			ieee80211_is_data_qos(hdr->frame_control);
 
 	cb->flags = 0;
+	cb->vif = vif;
+	cb->txq = txq;
+	cb->airtime_est = airtime;
+
+	if (info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP) {
+		cb->flags |= ATH10K_SKB_F_HW_80211_ENCAP;
+		return;
+	}
+
 	if (!ath10k_tx_h_use_hwcrypto(vif, skb))
 		cb->flags |= ATH10K_SKB_F_NO_HWCRYPT;
 
@@ -3562,10 +3575,6 @@ static void ath10k_mac_tx_h_fill_cb(struct ath10k *ar,
 		cb->flags |= ATH10K_SKB_F_NO_HWCRYPT;
 		cb->flags |= ATH10K_SKB_F_RAW_TX;
 	}
-
-	cb->vif = vif;
-	cb->txq = txq;
-	cb->airtime_est = airtime;
 }
 
 bool ath10k_mac_tx_frm_has_freq(struct ath10k *ar)
@@ -3675,6 +3684,9 @@ static int ath10k_mac_tx(struct ath10k *ar,
 	const struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(skb);
 	int ret;
 
+	if (info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP)
+		goto skip_encap;
+
 	/* We should disable CCK RATE due to P2P */
 	if (info->flags & IEEE80211_TX_CTL_NO_CCK_RATE)
 		ath10k_dbg(ar, ATH10K_DBG_MAC, "IEEE80211_TX_CTL_NO_CCK_RATE\n");
@@ -3698,6 +3710,7 @@ static int ath10k_mac_tx(struct ath10k *ar,
 		}
 	}
 
+skip_encap:
 	if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) {
 		if (!ath10k_mac_tx_frm_has_freq(ar)) {
 			ath10k_dbg(ar, ATH10K_DBG_MAC, "queued offchannel skb %pK\n",
@@ -3747,6 +3760,7 @@ void ath10k_offchan_tx_work(struct work_struct *work)
 	int ret;
 	unsigned long time_left;
 	bool tmp_peer_created = false;
+	struct ieee80211_tx_info *info;
 
 	/* FW requirement: We must create a peer before FW will send out
 	 * an offchannel frame. Otherwise the frame will be stuck and
@@ -3766,8 +3780,14 @@ void ath10k_offchan_tx_work(struct work_struct *work)
 		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac offchannel skb %pK\n",
 			   skb);
 
-		hdr = (struct ieee80211_hdr *)skb->data;
-		peer_addr = ieee80211_get_DA(hdr);
+		info = IEEE80211_SKB_CB(skb);
+
+		if (info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP) {
+			peer_addr = skb->data;
+		} else {
+			hdr = (struct ieee80211_hdr *)skb->data;
+			peer_addr = ieee80211_get_DA(hdr);
+		}
 
 		spin_lock_bh(&ar->data_lock);
 		vdev_id = ar->scan.vdev_id;
@@ -4295,7 +4315,7 @@ static void ath10k_mac_op_tx(struct ieee80211_hw *hw,
 	struct ieee80211_vif *vif = info->control.vif;
 	struct ieee80211_sta *sta = control->sta;
 	struct ieee80211_txq *txq = NULL;
-	struct ieee80211_hdr *hdr = (void *)skb->data;
+	struct ieee80211_hdr *hdr;
 	enum ath10k_hw_txrx_mode txmode;
 	enum ath10k_mac_tx_path txpath;
 	bool is_htt;
@@ -4326,14 +4346,20 @@ static void ath10k_mac_op_tx(struct ieee80211_hw *hw,
 			return;
 		}
 
-		ret = ath10k_htt_tx_mgmt_inc_pending(htt, is_mgmt, is_presp);
-		if (ret) {
-			ath10k_dbg(ar, ATH10K_DBG_MAC, "failed to increase tx mgmt pending count: %d, dropping\n",
-				   ret);
-			ath10k_htt_tx_dec_pending(htt);
-			spin_unlock_bh(&ar->htt.tx_lock);
-			ieee80211_free_txskb(ar->hw, skb);
-			return;
+		if (is_mgmt) {
+			hdr = (struct ieee80211_hdr *)skb->data;
+			is_presp = ieee80211_is_probe_resp(hdr->frame_control);
+
+			ret = ath10k_htt_tx_mgmt_inc_pending(htt, is_mgmt,
+							     is_presp);
+			if (ret) {
+				ath10k_dbg(ar, ATH10K_DBG_MAC, "failed to increase tx mgmt pending count: %d, dropping\n",
+					   ret);
+				ath10k_htt_tx_dec_pending(htt);
+				spin_unlock_bh(&ar->htt.tx_lock);
+				ieee80211_free_txskb(ar->hw, skb);
+				return;
+			}
 		}
 		spin_unlock_bh(&ar->htt.tx_lock);
 	}
@@ -5094,6 +5120,7 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 	struct ath10k_vif *arvif = (void *)vif->drv_priv;
 	struct ath10k_peer *peer;
 	enum wmi_sta_powersave_param param;
+	int hw_encap = 0;
 	int ret = 0;
 	u32 value;
 	int bit;
@@ -5185,6 +5212,17 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 		break;
 	}
 
+	switch (vif->type) {
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_AP_VLAN:
+	case NL80211_IFTYPE_AP:
+		hw_encap = 1;
+		break;
+	default:
+		break;
+	}
+	ieee80211_set_hw_80211_encap(vif, ar->ethernetmode & hw_encap);
+
 	/* Using vdev_id as queue number will make it very easy to do per-vif
 	 * tx queue locking. This shouldn't wrap due to interface combinations
 	 * but do a modulo for correctness sake and prevent using offchannel tx
@@ -8602,6 +8640,8 @@ int ath10k_mac_register(struct ath10k *ar)
 	ieee80211_hw_set(ar->hw, QUEUE_CONTROL);
 	ieee80211_hw_set(ar->hw, SUPPORTS_TX_FRAG);
 	ieee80211_hw_set(ar->hw, REPORTS_LOW_ACK);
+	if (ar->ethernetmode)
+		ieee80211_hw_set(ar->hw, SUPPORTS_80211_ENCAP);
 
 	if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags))
 		ieee80211_hw_set(ar->hw, SW_CRYPTO_CONTROL);
diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index c5818d28f55a..bad5e7335c0e 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -50,6 +50,8 @@ int ath10k_txrx_tx_unref(struct ath10k_htt *htt,
 	struct ath10k_skb_cb *skb_cb;
 	struct ath10k_txq *artxq;
 	struct sk_buff *msdu;
+	struct ieee80211_vif *vif;
+	u8 flags;
 
 	ath10k_dbg(ar, ATH10K_DBG_HTT,
 		   "htt tx completion msdu_id %u status %d\n",
@@ -78,6 +80,9 @@ int ath10k_txrx_tx_unref(struct ath10k_htt *htt,
 		artxq->num_fw_queued--;
 	}
 
+	flags = skb_cb->flags;
+	vif = skb_cb->vif;
+
 	ath10k_htt_tx_free_msdu_id(htt, tx_done->msdu_id);
 	ath10k_htt_tx_dec_pending(htt);
 	if (htt->num_pending_tx == 0)
@@ -121,7 +126,11 @@ int ath10k_txrx_tx_unref(struct ath10k_htt *htt,
 		info->status.is_valid_ack_signal = true;
 	}
 
-	ieee80211_tx_status(htt->ar->hw, msdu);
+	if (flags & ATH10K_SKB_F_HW_80211_ENCAP)
+		ieee80211_tx_status_8023(htt->ar->hw, vif, msdu);
+	else
+		ieee80211_tx_status(htt->ar->hw, msdu);
+
 	/* we do not own the msdu anymore */
 
 	return 0;
-- 
2.11.0


  parent reply	other threads:[~2019-04-10  7:35 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-10  7:35 [RFC V4 0/2] mac80211: add 802.11 encapsulation offloading John Crispin
2019-04-10  7:35 ` [RFC V4 1/2] mac80211: add hw 80211 encapsulation offloading support John Crispin
2019-04-12 11:37   ` Johannes Berg
2019-04-10  7:35 ` John Crispin [this message]
2019-04-10 15:31   ` [RFC V4 2/2] ath10k: add tx hw 802.11 encapusaltion " Kalle Valo
2019-04-11 18:36     ` John Crispin
2019-04-12  3:56       ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190410073514.12794-3-john@phrozen.org \
    --to=john@phrozen.org \
    --cc=johannes@sipsolutions.net \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=rmanohar@qti.qualcomm.com \
    --cc=skode@qti.qualcomm.com \
    --cc=slakkavalli@datto.com \
    --cc=vthiagar@qti.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.