From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: qemu-devel@nongnu.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>,
peter.maydell@linaro.org, richard.henderson@linaro.org
Subject: [Qemu-devel] [PATCH RFC v7 00/12] Add RX archtecture support
Date: Mon, 15 Apr 2019 14:35:18 +0900 [thread overview]
Message-ID: <20190415053531.77264-1-ysato@users.sourceforge.jp> (raw)
Hello.
This patch series is added Renesas RX target emulation.
It was corrected because the correspondence to registerfield was insufficient.
My git repository is bellow.
git://git.pf.osdn.net/gitroot/y/ys/ysato/qemu.git
Testing binaries bellow.
u-boot
Download - https://osdn.net/users/ysato/pf/qemu/dl/u-boot.bin.gz
starting
$ gzip -d u-boot.bin.gz
$ qemu-system-rx -bios u-boot.bin
linux and pico-root (only sash)
Download - https://osdn.net/users/ysato/pf/qemu/dl/zImage (kernel)
https://osdn.net/users/ysato/pf/qemu/dl/rx-qemu.dtb (DeviceTree)
starting
$ qemu-system-rx -kernel zImage -dtb rx-qemu.dtb -append "earlycon"
Changes v6.
Add FIELD_DP8 and FIELD_DP16 to hw/registerfields.h.
Fixed registerfield support in timer and serial emulation.
Yoshinori Sato (12):
target/rx: TCG translation
target/rx: TCG helper
target/rx: CPU definition
target/rx: RX disassembler
target/rx: Miscellaneous files
hw/intc: RX62N interrupt controller (ICUa)
hw/timer: RX62N internal timer modules
hw/char: RX62N serical communication interface (SCI)
hw/rx: RX Target hardware definition
Add rx-softmmu
MAINTAINERS: Add RX
hw/registerfields.h: Add 8bit and 16bit register macros.
configure | 8 +
default-configs/rx-softmmu.mak | 7 +
include/disas/bfd.h | 5 +
include/hw/char/renesas_sci.h | 45 +
include/hw/intc/rx_icu.h | 49 +
include/hw/registerfields.h | 28 +-
include/hw/rx/rx.h | 7 +
include/hw/rx/rx62n.h | 54 +
include/hw/timer/renesas_cmt.h | 33 +
include/hw/timer/renesas_tmr.h | 46 +
include/sysemu/arch_init.h | 1 +
target/rx/cpu-qom.h | 52 +
target/rx/cpu.h | 197 ++++
target/rx/helper.h | 31 +
arch_init.c | 2 +
hw/char/renesas_sci.c | 341 ++++++
hw/intc/rx_icu.c | 373 ++++++
hw/rx/rx62n.c | 226 ++++
hw/rx/rxqemu.c | 100 ++
hw/timer/renesas_cmt.c | 277 +++++
hw/timer/renesas_tmr.c | 458 ++++++++
target/rx/cpu.c | 232 ++++
target/rx/disas.c | 1481 ++++++++++++++++++++++++
target/rx/gdbstub.c | 112 ++
target/rx/helper.c | 148 +++
target/rx/monitor.c | 38 +
target/rx/op_helper.c | 481 ++++++++
target/rx/translate.c | 2433 ++++++++++++++++++++++++++++++++++++++++
MAINTAINERS | 19 +
hw/Kconfig | 1 +
hw/char/Kconfig | 3 +
hw/char/Makefile.objs | 2 +-
hw/intc/Makefile.objs | 1 +
hw/rx/Kconfig | 2 +
hw/rx/Makefile.objs | 1 +
hw/timer/Kconfig | 6 +
hw/timer/Makefile.objs | 3 +
target/rx/Makefile.objs | 11 +
target/rx/insns.decode | 617 ++++++++++
39 files changed, 7929 insertions(+), 2 deletions(-)
create mode 100644 default-configs/rx-softmmu.mak
create mode 100644 include/hw/char/renesas_sci.h
create mode 100644 include/hw/intc/rx_icu.h
create mode 100644 include/hw/rx/rx.h
create mode 100644 include/hw/rx/rx62n.h
create mode 100644 include/hw/timer/renesas_cmt.h
create mode 100644 include/hw/timer/renesas_tmr.h
create mode 100644 target/rx/cpu-qom.h
create mode 100644 target/rx/cpu.h
create mode 100644 target/rx/helper.h
create mode 100644 hw/char/renesas_sci.c
create mode 100644 hw/intc/rx_icu.c
create mode 100644 hw/rx/rx62n.c
create mode 100644 hw/rx/rxqemu.c
create mode 100644 hw/timer/renesas_cmt.c
create mode 100644 hw/timer/renesas_tmr.c
create mode 100644 target/rx/cpu.c
create mode 100644 target/rx/disas.c
create mode 100644 target/rx/gdbstub.c
create mode 100644 target/rx/helper.c
create mode 100644 target/rx/monitor.c
create mode 100644 target/rx/op_helper.c
create mode 100644 target/rx/translate.c
create mode 100644 hw/rx/Kconfig
create mode 100644 hw/rx/Makefile.objs
create mode 100644 target/rx/Makefile.objs
create mode 100644 target/rx/insns.decode
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, richard.henderson@linaro.org,
Yoshinori Sato <ysato@users.sourceforge.jp>
Subject: [Qemu-devel] [PATCH RFC v7 00/12] Add RX archtecture support
Date: Mon, 15 Apr 2019 14:35:18 +0900 [thread overview]
Message-ID: <20190415053531.77264-1-ysato@users.sourceforge.jp> (raw)
Message-ID: <20190415053518.aeAwxCsTpu7aazB5rNKe7Ka6Nl3k5WlOHUK7-KB0hYM@z> (raw)
Hello.
This patch series is added Renesas RX target emulation.
It was corrected because the correspondence to registerfield was insufficient.
My git repository is bellow.
git://git.pf.osdn.net/gitroot/y/ys/ysato/qemu.git
Testing binaries bellow.
u-boot
Download - https://osdn.net/users/ysato/pf/qemu/dl/u-boot.bin.gz
starting
$ gzip -d u-boot.bin.gz
$ qemu-system-rx -bios u-boot.bin
linux and pico-root (only sash)
Download - https://osdn.net/users/ysato/pf/qemu/dl/zImage (kernel)
https://osdn.net/users/ysato/pf/qemu/dl/rx-qemu.dtb (DeviceTree)
starting
$ qemu-system-rx -kernel zImage -dtb rx-qemu.dtb -append "earlycon"
Changes v6.
Add FIELD_DP8 and FIELD_DP16 to hw/registerfields.h.
Fixed registerfield support in timer and serial emulation.
Yoshinori Sato (12):
target/rx: TCG translation
target/rx: TCG helper
target/rx: CPU definition
target/rx: RX disassembler
target/rx: Miscellaneous files
hw/intc: RX62N interrupt controller (ICUa)
hw/timer: RX62N internal timer modules
hw/char: RX62N serical communication interface (SCI)
hw/rx: RX Target hardware definition
Add rx-softmmu
MAINTAINERS: Add RX
hw/registerfields.h: Add 8bit and 16bit register macros.
configure | 8 +
default-configs/rx-softmmu.mak | 7 +
include/disas/bfd.h | 5 +
include/hw/char/renesas_sci.h | 45 +
include/hw/intc/rx_icu.h | 49 +
include/hw/registerfields.h | 28 +-
include/hw/rx/rx.h | 7 +
include/hw/rx/rx62n.h | 54 +
include/hw/timer/renesas_cmt.h | 33 +
include/hw/timer/renesas_tmr.h | 46 +
include/sysemu/arch_init.h | 1 +
target/rx/cpu-qom.h | 52 +
target/rx/cpu.h | 197 ++++
target/rx/helper.h | 31 +
arch_init.c | 2 +
hw/char/renesas_sci.c | 341 ++++++
hw/intc/rx_icu.c | 373 ++++++
hw/rx/rx62n.c | 226 ++++
hw/rx/rxqemu.c | 100 ++
hw/timer/renesas_cmt.c | 277 +++++
hw/timer/renesas_tmr.c | 458 ++++++++
target/rx/cpu.c | 232 ++++
target/rx/disas.c | 1481 ++++++++++++++++++++++++
target/rx/gdbstub.c | 112 ++
target/rx/helper.c | 148 +++
target/rx/monitor.c | 38 +
target/rx/op_helper.c | 481 ++++++++
target/rx/translate.c | 2433 ++++++++++++++++++++++++++++++++++++++++
MAINTAINERS | 19 +
hw/Kconfig | 1 +
hw/char/Kconfig | 3 +
hw/char/Makefile.objs | 2 +-
hw/intc/Makefile.objs | 1 +
hw/rx/Kconfig | 2 +
hw/rx/Makefile.objs | 1 +
hw/timer/Kconfig | 6 +
hw/timer/Makefile.objs | 3 +
target/rx/Makefile.objs | 11 +
target/rx/insns.decode | 617 ++++++++++
39 files changed, 7929 insertions(+), 2 deletions(-)
create mode 100644 default-configs/rx-softmmu.mak
create mode 100644 include/hw/char/renesas_sci.h
create mode 100644 include/hw/intc/rx_icu.h
create mode 100644 include/hw/rx/rx.h
create mode 100644 include/hw/rx/rx62n.h
create mode 100644 include/hw/timer/renesas_cmt.h
create mode 100644 include/hw/timer/renesas_tmr.h
create mode 100644 target/rx/cpu-qom.h
create mode 100644 target/rx/cpu.h
create mode 100644 target/rx/helper.h
create mode 100644 hw/char/renesas_sci.c
create mode 100644 hw/intc/rx_icu.c
create mode 100644 hw/rx/rx62n.c
create mode 100644 hw/rx/rxqemu.c
create mode 100644 hw/timer/renesas_cmt.c
create mode 100644 hw/timer/renesas_tmr.c
create mode 100644 target/rx/cpu.c
create mode 100644 target/rx/disas.c
create mode 100644 target/rx/gdbstub.c
create mode 100644 target/rx/helper.c
create mode 100644 target/rx/monitor.c
create mode 100644 target/rx/op_helper.c
create mode 100644 target/rx/translate.c
create mode 100644 hw/rx/Kconfig
create mode 100644 hw/rx/Makefile.objs
create mode 100644 target/rx/Makefile.objs
create mode 100644 target/rx/insns.decode
--
2.11.0
next reply other threads:[~2019-04-15 5:35 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-15 5:35 Yoshinori Sato [this message]
2019-04-15 5:35 ` [Qemu-devel] [PATCH RFC v7 00/12] Add RX archtecture support Yoshinori Sato
2019-04-15 5:35 ` [Qemu-devel] [PATCH RFC v7 01/12] target/rx: TCG translation Yoshinori Sato
2019-04-15 5:35 ` Yoshinori Sato
2019-04-15 5:35 ` [Qemu-devel] [PATCH RFC v7 02/12] target/rx: TCG helper Yoshinori Sato
2019-04-15 5:35 ` Yoshinori Sato
2019-04-15 5:35 ` [Qemu-devel] [PATCH RFC v7 03/12] target/rx: CPU definition Yoshinori Sato
2019-04-15 5:35 ` Yoshinori Sato
2019-04-15 5:35 ` [Qemu-devel] [PATCH RFC v7 04/12] target/rx: RX disassembler Yoshinori Sato
2019-04-15 5:35 ` Yoshinori Sato
2019-04-15 5:35 ` [Qemu-devel] [PATCH RFC v7 05/12] target/rx: Miscellaneous files Yoshinori Sato
2019-04-15 5:35 ` Yoshinori Sato
2019-04-15 5:35 ` [Qemu-devel] [PATCH RFC v7 06/12] hw/intc: RX62N interrupt controller (ICUa) Yoshinori Sato
2019-04-15 5:35 ` Yoshinori Sato
2019-04-15 5:35 ` [Qemu-devel] [PATCH RFC v7 07/12] hw/timer: RX62N internal timer modules Yoshinori Sato
2019-04-15 5:35 ` Yoshinori Sato
2019-04-15 5:35 ` [Qemu-devel] [PATCH RFC v7 08/12] hw/char: RX62N serical communication interface (SCI) Yoshinori Sato
2019-04-15 5:35 ` Yoshinori Sato
2019-04-15 5:35 ` [Qemu-devel] [PATCH RFC v7 09/12] hw/rx: RX Target hardware definition Yoshinori Sato
2019-04-15 5:35 ` Yoshinori Sato
2019-04-15 5:35 ` [Qemu-devel] [PATCH RFC v7 10/12] Add rx-softmmu Yoshinori Sato
2019-04-15 5:35 ` Yoshinori Sato
2019-04-15 5:35 ` [Qemu-devel] [PATCH RFC v7 11/12] MAINTAINERS: Add RX Yoshinori Sato
2019-04-15 5:35 ` Yoshinori Sato
2019-04-15 5:35 ` [Qemu-devel] [PATCH RFC v7 12/12] hw/registerfields.h: Add 8bit and 16bit register macros Yoshinori Sato
2019-04-15 5:35 ` Yoshinori Sato
2019-04-15 5:35 ` [Qemu-devel] [PATCH RFC v7 12/12] include/hw/regiserfields.h: Add 8bit and 16bit registers Yoshinori Sato
2019-04-15 5:35 ` Yoshinori Sato
2019-04-15 5:50 ` [Qemu-devel] [PATCH RFC v7 00/12] Add RX archtecture support no-reply
2019-04-15 5:50 ` no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190415053531.77264-1-ysato@users.sourceforge.jp \
--to=ysato@users.sourceforge.jp \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.