[PATCH] staging: olpc_dcon: Convert all uses of old GPIO API to new descriptor API

[Jerry Lin <wahahab11@gmail.com>]

This commit eliminate all uses of legacy integer base GPIO API in
olpc_dcon_xo_1_5.c and replace them with new descriptor GPIO API like
those in olpc_dcon_xo_1.c.

Also pull some common code with olpc_dcon_xo_1.c to olpc_dcon.h for code
sharing.

Signed-off-by: Jerry Lin <wahahab11@gmail.com>
---
 drivers/staging/olpc_dcon/olpc_dcon.h        |  5 +++
 drivers/staging/olpc_dcon/olpc_dcon_xo_1.c   |  7 +---
 drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c | 56 ++++++++++++++++++++++++++--
 3 files changed, 58 insertions(+), 10 deletions(-)

diff --git a/drivers/staging/olpc_dcon/olpc_dcon.h b/drivers/staging/olpc_dcon/olpc_dcon.h
index c987aaf..22d976a 100644
--- a/drivers/staging/olpc_dcon/olpc_dcon.h
+++ b/drivers/staging/olpc_dcon/olpc_dcon.h
@@ -97,6 +97,11 @@ struct dcon_platform_data {
 	int (*read_status)(u8 *status);
 };
 
+struct dcon_gpio {
+	const char *name;
+	unsigned long flags;
+};
+
 #include <linux/interrupt.h>
 
 irqreturn_t dcon_interrupt(int irq, void *id);
diff --git a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
index a542864..02c0598 100644
--- a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
+++ b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
@@ -26,11 +26,6 @@ enum dcon_gpios {
 	OLPC_DCON_BLANK,
 };
 
-struct dcon_gpio {
-	const char *name;
-	unsigned long flags;
-};
-
 static const struct dcon_gpio gpios_asis[] = {
 	[OLPC_DCON_STAT0] = { .name = "dcon_stat0", .flags = GPIOD_ASIS },
 	[OLPC_DCON_STAT1] = { .name = "dcon_stat1", .flags = GPIOD_ASIS },
@@ -39,7 +34,7 @@ static const struct dcon_gpio gpios_asis[] = {
 	[OLPC_DCON_BLANK] = { .name = "dcon_blank", .flags = GPIOD_ASIS },
 };
 
-struct gpio_desc *gpios[5];
+static struct gpio_desc *gpios[5];
 
 static int dcon_init_xo_1(struct dcon_priv *dcon)
 {
diff --git a/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c b/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c
index 838daa2..52cdcd2 100644
--- a/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c
+++ b/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c
@@ -7,7 +7,9 @@
 
 #include <linux/acpi.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/machine.h>
 #include <asm/olpc.h>
 
 /* TODO: this eventually belongs in linux/vx855.h */
@@ -38,6 +40,33 @@
 
 #define PREFIX "OLPC DCON:"
 
+enum dcon_gpios {
+	OLPC_DCON_STAT0,
+	OLPC_DCON_STAT1,
+	OLPC_DCON_LOAD,
+};
+
+struct gpiod_lookup_table gpios_table = {
+	.dev_id = NULL,
+	.table = {
+		GPIO_LOOKUP("VX855 South Bridge", VX855_GPIO(1), "dcon_load",
+			    GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("VX855 South Bridge", VX855_GPI(10), "dcon_stat0",
+			    GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("VX855 South Bridge", VX855_GPI(11), "dcon_stat1",
+			    GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+static const struct dcon_gpio gpios_asis[] = {
+	[OLPC_DCON_STAT0] = { .name = "dcon_stat0", .flags = GPIOD_ASIS },
+	[OLPC_DCON_STAT1] = { .name = "dcon_stat1", .flags = GPIOD_ASIS },
+	[OLPC_DCON_LOAD] = { .name = "dcon_load", .flags = GPIOD_ASIS },
+};
+
+static struct gpio_desc *gpios[3];
+
 static void dcon_clear_irq(void)
 {
 	/* irq status will appear in PMIO_Rx50[6] (RW1C) on gpio12 */
@@ -57,6 +86,25 @@ static int dcon_was_irq(void)
 static int dcon_init_xo_1_5(struct dcon_priv *dcon)
 {
 	unsigned int irq;
+	const struct dcon_gpio *pin = &gpios_asis[0];
+	int i;
+	int ret;
+
+	/* Add GPIO look up table */
+	gpios_table.dev_id = dev_name(&dcon->client->dev);
+	gpiod_add_lookup_table(&gpios_table);
+
+	/* Get GPIO descriptor */
+	for (i = 0; i < ARRAY_SIZE(gpios_asis); i++) {
+		gpios[i] = devm_gpiod_get(&dcon->client->dev, pin[i].name,
+					  pin[i].flags);
+		if (IS_ERR(gpios[i])) {
+			ret = PTR_ERR(gpios[i]);
+			pr_err("failed to request %s GPIO: %d\n", pin[i].name,
+			       ret);
+			return ret;
+		}
+	}
 
 	dcon_clear_irq();
 
@@ -131,7 +179,7 @@ static void dcon_wiggle_xo_1_5(void)
 
 static void dcon_set_dconload_xo_1_5(int val)
 {
-	gpio_set_value(VX855_GPIO(1), val);
+	gpiod_set_value(gpios[OLPC_DCON_LOAD], val);
 }
 
 static int dcon_read_status_xo_1_5(u8 *status)
@@ -140,8 +188,8 @@ static int dcon_read_status_xo_1_5(u8 *status)
 		return -1;
 
 	/* i believe this is the same as "inb(0x44b) & 3" */
-	*status = gpio_get_value(VX855_GPI(10));
-	*status |= gpio_get_value(VX855_GPI(11)) << 1;
+	*status = gpiod_get_value(gpios[OLPC_DCON_STAT0]);
+	*status |= gpiod_get_value(gpios[OLPC_DCON_STAT1]) << 1;
 
 	dcon_clear_irq();
 
-- 
2.7.4