From: Adam Ford <aford173@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 3/4] usb: ohci: ohci-da8xx: Enable da850-ohci driver with DM support
Date: Sun, 28 Apr 2019 16:45:27 -0500 [thread overview]
Message-ID: <20190428214528.935-4-aford173@gmail.com> (raw)
In-Reply-To: <20190428214528.935-1-aford173@gmail.com>
This patch reuses some former code for the hawkboard, combines it
with some some similar DM_USB compatible code for the OHCI driver,
and enables the use of the da850's OHCI controller with DM_USB
compatibility.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 0fbc115801..0d8ab3b651 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -239,6 +239,11 @@ config USB_OHCI_GENERIC
---help---
Enables support for generic OHCI controller.
+config USB_OHCI_DA8XX
+ bool "Support for da850 OHCI USB controller"
+ help
+ Enable support for the da850 USB controller.
+
endif # USB_OHCI_HCD
config USB_UHCI_HCD
diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
index 47ad3f34d5..0f38791973 100644
--- a/drivers/usb/host/ohci-da8xx.c
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -4,9 +4,63 @@
*/
#include <common.h>
-
+#include <asm/io.h>
+#include <clk.h>
+#include <dm.h>
+#include <dm/ofnode.h>
+#include <generic-phy.h>
+#include <reset.h>
+#include "ohci.h"
#include <asm/arch/da8xx-usb.h>
+struct da8xx_ohci {
+ ohci_t ohci;
+ struct clk *clocks; /* clock list */
+ struct phy phy;
+ int clock_count; /* number of clock in clock list */
+};
+
+static int usb_phy_on(void)
+{
+ u32 timeout;
+ u32 cfgchip2;
+
+ cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2);
+
+ cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN |
+ CFGCHIP2_OTGMODE | CFGCHIP2_REFFREQ |
+ CFGCHIP2_USB1PHYCLKMUX);
+ cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN | CFGCHIP2_PHY_PLLON |
+ CFGCHIP2_REFFREQ_24MHZ | CFGCHIP2_USB2PHYCLKMUX |
+ CFGCHIP2_USB1SUSPENDM;
+
+ writel(cfgchip2, &davinci_syscfg_regs->cfgchip2);
+
+ /* wait until the usb phy pll locks */
+ timeout = 0x7FFFFFF;
+
+ while (timeout--) {
+ if (readl(&davinci_syscfg_regs->cfgchip2) & CFGCHIP2_PHYCLKGD)
+ return 1;
+ }
+
+ /* USB phy was not turned on */
+ return 0;
+}
+
+static void usb_phy_off(void)
+{
+ u32 cfgchip2;
+
+ /*
+ * Power down the on-chip PHY.
+ */
+ cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2);
+ cfgchip2 &= ~(CFGCHIP2_PHY_PLLON | CFGCHIP2_USB1SUSPENDM);
+ cfgchip2 |= CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN | CFGCHIP2_RESET;
+ writel(cfgchip2, &davinci_syscfg_regs->cfgchip2);
+}
+
int usb_cpu_init(void)
{
/* enable psc for usb2.0 */
@@ -37,3 +91,94 @@ int usb_cpu_init_fail(void)
{
return usb_cpu_stop();
}
+
+#if CONFIG_IS_ENABLED(DM_USB)
+static int ohci_da8xx_probe(struct udevice *dev)
+{
+ struct ohci_regs *regs = (struct ohci_regs *)devfdt_get_addr(dev);
+ struct da8xx_ohci *priv = dev_get_priv(dev);
+ int i, err, ret, clock_nb;
+
+ err = 0;
+ priv->clock_count = 0;
+ clock_nb = dev_count_phandle_with_args(dev, "clocks", "#clock-cells");
+ if (clock_nb > 0) {
+ priv->clocks = devm_kcalloc(dev, clock_nb, sizeof(struct clk),
+ GFP_KERNEL);
+ if (!priv->clocks)
+ return -ENOMEM;
+
+ for (i = 0; i < clock_nb; i++) {
+ err = clk_get_by_index(dev, i, &priv->clocks[i]);
+ if (err < 0)
+ break;
+
+ err = clk_enable(&priv->clocks[i]);
+ if (err) {
+ dev_err(dev, "failed to enable clock %d\n", i);
+ clk_free(&priv->clocks[i]);
+ goto clk_err;
+ }
+ priv->clock_count++;
+ }
+ } else if (clock_nb != -ENOENT) {
+ dev_err(dev, "failed to get clock phandle(%d)\n", clock_nb);
+ return clock_nb;
+ }
+
+ err = usb_cpu_init();
+
+ if (err)
+ goto clk_err;
+
+ err = ohci_register(dev, regs);
+ if (err)
+ goto phy_err;
+
+ return 0;
+
+phy_err:
+ ret = usb_cpu_stop();
+ if (ret)
+ dev_err(dev, "failed to shutdown usb phy\n");
+
+clk_err:
+ ret = clk_release_all(priv->clocks, priv->clock_count);
+ if (ret)
+ dev_err(dev, "failed to disable all clocks\n");
+
+ return err;
+}
+
+static int ohci_da8xx_remove(struct udevice *dev)
+{
+ struct da8xx_ohci *priv = dev_get_priv(dev);
+ int ret;
+
+ ret = ohci_deregister(dev);
+ if (ret)
+ return ret;
+
+ ret = usb_cpu_stop();
+ if (ret)
+ return ret;
+
+ return clk_release_all(priv->clocks, priv->clock_count);
+}
+
+static const struct udevice_id da8xx_ohci_ids[] = {
+ { .compatible = "ti,da830-ohci" },
+ { }
+};
+
+U_BOOT_DRIVER(ohci_generic) = {
+ .name = "ohci-da8xx",
+ .id = UCLASS_USB,
+ .of_match = da8xx_ohci_ids,
+ .probe = ohci_da8xx_probe,
+ .remove = ohci_da8xx_remove,
+ .ops = &ohci_usb_ops,
+ .priv_auto_alloc_size = sizeof(struct da8xx_ohci),
+ .flags = DM_FLAG_ALLOC_PRIV_DMA,
+};
+#endif
--
2.17.1
next prev parent reply other threads:[~2019-04-28 21:45 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-28 21:45 [U-Boot] (no subject) Adam Ford
2019-04-28 21:45 ` [U-Boot] [PATCH 1/4] usb: ohci: Re-enable commented out delay Adam Ford
2019-04-29 8:25 ` Marek Vasut
2019-04-28 21:45 ` [U-Boot] [PATCH 2/4] ARM: davinci: Remove unused functions from header Adam Ford
2019-04-29 8:25 ` Marek Vasut
2019-04-28 21:45 ` Adam Ford [this message]
2019-04-29 8:24 ` [U-Boot] [PATCH 3/4] usb: ohci: ohci-da8xx: Enable da850-ohci driver with DM support Marek Vasut
2019-04-30 9:24 ` Adam Ford
2019-04-30 9:32 ` Marek Vasut
2019-04-28 21:45 ` [U-Boot] [PATCH 4/4] ARM: da850evm: Enable da850-ohci USB host controller Adam Ford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190428214528.935-4-aford173@gmail.com \
--to=aford173@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.