All of lore.kernel.org
 help / color / mirror / Atom feed
From: Oliver Graute <oliver.graute@gmail.com>
To: robh+dt@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org,
	s.hauer@pengutronix.de, kernel@pengutronix.de,
	festevam@gmail.com, linux-imx@nxp.com, l.stach@pengutronix.de
Cc: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm64: add basic DTS for i.MX8QM
Date: Mon, 13 May 2019 14:04:15 +0200	[thread overview]
Message-ID: <20190513120415.GA13980@optiplex> (raw)

First try for discussion and review. Need some help to get this running.

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
---
 arch/arm64/boot/dts/freescale/imx8qm.dtsi | 152 ++++++++++++++++++++++
 1 file changed, 152 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm.dtsi

diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
new file mode 100644
index 000000000000..9ae46fe86cc4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP
+ * Copyright 2019 Oliver Graute <oliver.graute@kococonnector.com>
+ */
+
+#include <dt-bindings/clock/imx8-clock.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/pads-imx8qm.h>
+
+/ {
+	compatible = "fsl,imx8qm";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &lpuart0;
+	};
+
+	cpus {
+		A53_0 {
+			operating-points = <
+				1200000	   0
+				1104000	   0
+				900000	   0
+				600000	   0
+			>;
+			clocks = <&clk IMX8QM_A53_DIV>;
+			clock-latency = <61036>;
+			#cooling-cells = <2>;
+		};
+
+		A72_0 {
+			operating-points = <
+				1596000	   0
+				1296000	   0
+				1056000	   0
+				600000     0
+			>;
+			clocks = <&clk IMX8QM_A72_DIV>;
+			clock-latency = <61036>;
+			#cooling-cells = <2>;
+		};
+
+	};
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		decoder_boot: decoder_boot@0x84000000 {
+			no-map;
+			reg = <0 0x84000000 0 0x2000000>;
+		};
+		encoder_boot: encoder_boot@0x86000000 {
+			no-map;
+			reg = <0 0x86000000 0 0x400000>;
+		};
+		rpmsg_reserved: rpmsg@0x90000000 {
+			no-map;
+			reg = <0 0x90000000 0 0x400000>;
+		};
+
+		decoder_rpc: decoder_rpc@0x90400000 {
+			no-map;
+			reg = <0 0x90400000 0 0x200000>;
+		};
+		encoder_rpc: encoder_rpc@0x90600000 {
+			no-map;
+			reg = <0 0x90600000 0 0x200000>;
+		};
+		dsp_reserved: dsp@0x92400000 {
+			no-map;
+			reg = <0 0x92400000 0 0x2000000>;
+		};
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x3c000000>;
+			alloc-ranges = <0 0x96000000 0 0x3c000000>;
+			linux,cma-default;
+		};
+
+	};
+
+	gic: interrupt-controller@51a00000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x51b00000 0 0xC0000>, /* GICR */
+		      <0x0 0x52000000 0 0x2000>,  /* GICC */
+		      <0x0 0x52010000 0 0x1000>,  /* GICH */
+		      <0x0 0x52020000 0 0x20000>; /* GICV */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9
+			(GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-parent = <&gic>;
+	};
+
+	clk: clk {
+		compatible = "fsl,imx8qm-clk";
+		#clock-cells = <1>;
+	};
+
+	iomuxc: iomuxc {
+		compatible = "fsl,imx8qm-iomuxc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+		clock-frequency = <8000000>;
+		interrupt-parent = <&gic>;
+	};
+
+	smmu: iommu@51400000 {
+		compatible = "arm,mmu-500";
+		interrupt-parent = <&gic>;
+		reg = <0 0x51400000 0 0x40000>;
+		#global-interrupts = <1>;
+		#iommu-cells = <2>;
+		interrupts = <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>,
+			     <0 32 4>, <0 32 4>, <0 32 4>, <0 32 4>;
+	};
+
+};
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

                 reply	other threads:[~2019-05-13 12:04 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190513120415.GA13980@optiplex \
    --to=oliver.graute@gmail.com \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.