From: Bjorn Helgaas <helgaas@kernel.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Subject: [GIT PULL] PCI changes for v5.2
Date: Mon, 13 May 2019 18:57:21 -0500 [thread overview]
Message-ID: <20190513235721.GA157967@google.com> (raw)
Enumeration changes:
- Add _HPX Type 3 settings support, which gives firmware more influence
over device configuration (Alexandru Gagniuc)
- Support fixed bus numbers from bridge Enhanced Allocation capabilities
(Subbaraya Sundeep)
- Add "external-facing" DT property to identify cases where we require
IOMMU protection against untrusted devices (Jean-Philippe Brucker)
- Enable PCIe services for host controller drivers that use managed host
bridge alloc (Jean-Philippe Brucker)
- Log PCIe port service messages with pci_dev, not the pcie_device
(Frederick Lawler)
- Convert pciehp from pciehp_debug module parameter to generic dynamic
debug (Frederick Lawler)
Peer-to-peer DMA:
- Add whitelist of Root Complexes that support peer-to-peer DMA between
Root Ports (Christian König)
Native controller drivers:
- Add PCI host bridge DMA ranges for bridges that can't DMA everywhere,
e.g., iProc (Srinath Mannam)
- Add Amazon Annapurna Labs PCIe host controller driver (Jonathan
Chocron)
- Fix Tegra MSI target allocation so DMA doesn't generate unwanted MSIs
(Vidya Sagar)
- Fix of_node reference leaks (Wen Yang)
- Fix Hyper-V module unload & device removal issues (Dexuan Cui)
- Cleanup R-Car driver (Marek Vasut)
- Cleanup Keystone driver (Kishon Vijay Abraham I)
- Cleanup i.MX6 driver (Andrey Smirnov)
Significant bug fixes:
- Reset Lenovo ThinkPad P50 GPU so nouveau works after reboot (Lyude
Paul)
- Fix Switchtec firmware update performance issue (Wesley Sheng)
- Work around Pericom switch link retraining erratum (Stefan Mätje)
The following changes since commit 9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:
Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git tags/pci-v5.2-changes
for you to fetch changes up to c7a1c2bbb65e25551d585fba0fd36a01e0a22690:
Merge branch 'pci/trivial' (2019-05-13 18:34:48 -0500)
----------------------------------------------------------------
pci-v5.2-changes
----------------------------------------------------------------
Alexandru Gagniuc (4):
PCI/ACPI: Do not export pci_get_hp_params()
PCI/ACPI: Remove the need for 'struct hotplug_params'
PCI/ACPI: Implement _HPX Type 3 Setting Record
PCI/ACPI: Advertise _HPX Type 3 support via _OSC
Andrey Smirnov (11):
PCI: imx6: Simplify imx7d_pcie_wait_for_phy_pll_lock()
PCI: imx6: Drop imx6_pcie_wait_for_link()
PCI: imx6: Return -ETIMEOUT from imx6_pcie_wait_for_speed_change()
PCI: imx6: Remove PCIE_PL_PFLR_* constants
PCI: dwc: imx6: Share PHY debug register definitions
PCI: imx6: Make use of BIT() in constant definitions
PCI: imx6: Simplify bit operations in PHY functions
PCI: imx6: Simplify pcie_phy_poll_ack()
PCI: imx6: Restrict PHY register data to 16-bit
PCI: imx6: Use flags to indicate support for suspend
PCI: imx6: Use usleep_range() in imx6_pcie_enable_ref_clk()
Bjorn Helgaas (35):
PCI/MSI: Remove unused __write_msi_msg() and write_msi_msg()
PCI/MSI: Remove unused mask_msi_irq() and unmask_msi_irq()
PCI: Cleanup register definition width and whitespace
PCI: Fix comment typos
CPER: Add UEFI spec references
CPER: Remove unnecessary use of user-space types
PCI: Use dev_printk() when possible
PCI: pciehp: Remove pciehp_debug uses
PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition
PCI: pciehp: Remove pointless MY_NAME definition
Merge branch 'pci/aer'
Merge branch 'pci/enumeration'
Merge branch 'pci/hotplug'
Merge branch 'pci/msi'
Merge branch 'pci/misc'
Merge branch 'pci/peer-to-peer'
Merge branch 'pci/portdrv'
Merge branch 'pci/switchtec'
Merge branch 'pci/virtualization'
Merge branch 'pci/host/al'
Merge branch 'remotes/lorenzo/pci/controller-fixes'
Merge branch 'pci/dwc'
Merge branch 'remotes/lorenzo/pci/imx'
Merge branch 'remotes/lorenzo/pci/iproc'
Merge branch 'remotes/lorenzo/pci/keystone'
Merge branch 'remotes/lorenzo/pci/mediatek'
Merge branch 'remotes/lorenzo/pci/rcar'
Merge branch 'remotes/lorenzo/pci/rockchip'
Merge branch 'remotes/lorenzo/pci/tegra'
Merge branch 'remotes/lorenzo/pci/xilinx'
Merge branch 'remotes/lorenzo/pci/misc'
Merge branch 'pci/iova-dma-ranges'
Merge branch 'pci/printk'
Merge branch 'pci/printk-portdrv'
Merge branch 'pci/trivial'
Christian König (1):
PCI/P2PDMA: Allow P2P DMA between any devices under AMD ZEN Root Complex
Chunfeng Yun (1):
PCI: mediatek: Get optional clocks with devm_clk_get_optional()
Colin Ian King (1):
PCI: rockchip: Fix rockchip_pcie_ep_assert_intx() bitwise operations
Dexuan Cui (3):
PCI: hv: Fix a memory leak in hv_eject_device_work()
PCI: hv: Add hv_pci_remove_slots() when we unload the driver
PCI: hv: Add pci_destroy_slot() in pci_devices_present_work(), if necessary
Frederick Lawler (7):
PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info()
PCI/PME: Replace dev_printk(KERN_DEBUG) with dev_info()
PCI/DPC: Log messages with pci_dev, not pcie_device
PCI/AER: Log messages with pci_dev, not pcie_device
PCI: pciehp: Replace pciehp_debug module param with dyndbg
PCI: pciehp: Log messages with pci_dev, not pcie_device
PCI: pciehp: Remove unused dbg/err/info/warn() wrappers
Gustavo A. R. Silva (1):
PCI: Mark expected switch fall-throughs
Heiner Kallweit (8):
PCI: Add pci_dev_id() helper
r8169: use pci_dev_id() helper
powerpc/powernv/npu: Use pci_dev_id() helper
drm/amdkfd: Use pci_dev_id() helper
iommu/amd: Use pci_dev_id() helper
iommu/vt-d: Use pci_dev_id() helper
stmmac: pci: Use pci_dev_id() helper
platform/chrome: chromeos_laptop: use pci_dev_id() helper
Honghui Zhang (1):
arm64: dts: mt2712: Remove un-used property for PCIe
James Prestwood (1):
PCI: Mark Atheros AR9462 to avoid bus reset
Jean-Jacques Hiblot (1):
tools: PCI: Exit with error code when test fails
Jean-Philippe Brucker (3):
PCI: Init PCIe feature bits for managed host bridge alloc
dt-bindings: Add "external-facing" PCIe port property
PCI: OF: Support "external-facing" property
Jisheng Zhang (6):
PCI/AER: Change pci_aer_init() stub to return void
PCI: dwc: Fix dw_pcie_free_msi() if msi_irq is invalid
PCI: dwc: Free MSI IRQ page in dw_pcie_free_msi()
PCI: dwc: Free MSI in dw_pcie_host_init() error path
PCI: dwc: Use devm_pci_alloc_host_bridge() to simplify code
PCI: dwc: Save root bus for driver remove hooks
Johannes Thumshirn (1):
PCI: Remove unused pci_request_region_exclusive()
Jonathan Chocron (1):
PCI: al: Add Amazon Annapurna Labs PCIe host controller driver
Kangjie Lu (3):
PCI: xilinx: Check for __get_free_pages() failure
PCI: rcar: Fix a potential NULL pointer dereference
PCI: endpoint: Fix a potential NULL pointer dereference
Kazufumi Ikeda (1):
PCI: rcar: Add the initialization of PCIe link in resume_noirq()
Kishon Vijay Abraham I (37):
PCI: keystone: Cleanup interrupt related macros
PCI: keystone: Add separate functions for configuring MSI and legacy interrupt
PCI: keystone: Use hwirq to get the MSI IRQ number offset
PCI: keystone: Cleanup ks_pcie_msi_irq_handler()
PCI: dwc: Add support to use non default msi_irq_chip
PCI: keystone: Use Keystone specific msi_irq_chip
PCI: dwc: Remove Keystone specific dw_pcie_host_ops
PCI: dwc: Remove default MSI initialization for platform specific MSI chips
tools: PCI: Add 'h' in optstring of getopt()
tools: PCI: Handle pcitest.sh independently from pcitest
PCI: keystone: Add start_link()/stop_link() dw_pcie_ops
PCI: keystone: Cleanup error_irq configuration
dt-bindings: PCI: keystone: Add "reg-names" binding information
PCI: keystone: Perform host initialization in a single function
PCI: keystone: Use platform_get_resource_byname() to get memory resources
PCI: keystone: Move resources initialization to prepare for EP support
dt-bindings: PCI: Add dt-binding to configure PCIe mode
PCI: keystone: Explicitly set the PCIe mode
dt-bindings: PCI: Document "atu" reg-names
PCI: dwc: Enable iATU unroll for endpoint too
PCI: dwc: Fix ATU identification for designware version >= 4.80
PCI: keystone: Prevent ARM32 specific code to be compiled for ARM64
dt-bindings: PCI: Add PCI RC DT binding documentation for AM654
PCI: keystone: Add support for PCIe RC in AM654x Platforms
PCI: keystone: Invoke phy_reset() API before enabling PHY
PCI: OF: Allow of_pci_get_max_link_speed() to be used by PCI Endpoint drivers
PCI: keystone: Add support to set the max link speed from DT
PCI: endpoint: Add support to specify alignment for buffers allocated to BARs
PCI: dwc: Add const qualifier to struct dw_pcie_ep_ops
PCI: dwc: Fix dw_pcie_ep_find_capability() to return correct capability offset
PCI: dwc: Add callbacks for accessing dbi2 address space
dt-bindings: PCI: Add PCI EP DT binding documentation for AM654
PCI: keystone: Add support for PCIe EP in AM654x Platforms
PCI: designware-ep: Configure Resizable BAR cap to advertise the smallest size
PCI: designware-ep: Use aligned ATU window for raising MSI interrupts
misc: pci_endpoint_test: Add support to test PCI EP in AM654x
misc: pci_endpoint_test: Fix test_reg_bar to be updated in pci_endpoint_test
Lucas Stach (1):
PCI: imx6: Allow asynchronous probing
Lyude Paul (1):
PCI: Reset Lenovo ThinkPad P50 nvgpu at boot if necessary
Marc Gonzalez (1):
PCI: qcom: Use default config space read function
Marek Vasut (6):
PCI: rcar: Clean up remaining macros defining bits
PCI: rcar: Replace unsigned long with u32/unsigned int in register accessors
PCI: rcar: Replace various variable types with unsigned ones for register values
PCI: rcar: Replace (8 * n) with (BITS_PER_BYTE * n)
PCI: rcar: Clean up debug messages
PCI: rcar: Fix 64bit MSI message address handling
Mika Westerberg (1):
PCI/LINK: Disable bandwidth notification interrupt during suspend
Mohan Kumar (2):
PCI: Replace printk(KERN_INFO) with pr_info(), etc
PCI: Replace dev_printk(KERN_DEBUG) with dev_info(), etc
Nicholas Johnson (1):
PCI: Cleanup setup-bus.c comments and whitespace
Nikolai Kostrigin (1):
PCI: Mark AMD Stoney Radeon R7 GPU ATS as broken
Srinath Mannam (6):
PCI: iproc: Add CRS check in config read
PCI: iproc: Allow outbound configuration for 32-bit I/O region
PCI: iproc: Enable iProc config read for PAXBv2
PCI: Add dma_ranges window list
iommu/dma: Reserve IOVA for PCIe inaccessible DMA address
PCI: iproc: Add sorted dma ranges resource entries to host bridge
Stefan Mätje (3):
PCI: Factor out pcie_retrain_link() function
PCI: Work around Pericom PCIe-to-PCI bridge Retrain Link erratum
PCI: Rework pcie_retrain_link() wait loop
Subbaraya Sundeep (1):
PCI: Assign bus numbers present in EA capability for bridges
Subrahmanya Lingappa (1):
MAINTAINERS: Add Karthikeyan Mitran and Hou Zhiqiang for Mobiveil PCI
Tyrel Datwyler (2):
PCI: rpadlpar: Fix leaked device_node references in add/remove paths
PCI: rpaphp: Get/put device node reference during slot alloc/dealloc
Vidya Sagar (1):
PCI: tegra: Use the DMA-API to get the MSI address
Wen Yang (7):
PCI: dwc: pci-dra7xx: Fix a leaked reference by adding missing of_node_put()
PCI: uniphier: Fix a leaked reference by adding missing of_node_put()
PCI: dwc: layerscape: Fix a leaked reference by adding missing of_node_put()
PCI: rockchip: Fix a leaked reference by adding missing of_node_put()
PCI: aardvark: Fix a leaked reference by adding missing of_node_put()
PCI: iproc: Fix a leaked reference by adding missing of_node_put()
PCI: mediatek: Fix a leaked reference by adding missing of_node_put()
Wenwen Wang (1):
x86/PCI: Fix PCI IRQ routing table memory leak
Wesley Sheng (2):
switchtec: Increase PFF limit from 48 to 255
switchtec: Fix unintended mask of MRPC event
Wolfram Sang (1):
PCI: rcar: Do not shadow the 'irq' variable
.../devicetree/bindings/pci/designware-pcie.txt | 7 +-
.../devicetree/bindings/pci/pci-keystone.txt | 58 +-
Documentation/devicetree/bindings/pci/pci.txt | 50 ++
MAINTAINERS | 9 +-
arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 2 -
arch/powerpc/platforms/powernv/npu-dma.c | 14 +-
arch/x86/pci/irq.c | 10 +-
drivers/acpi/pci_mcfg.c | 12 +
drivers/acpi/pci_root.c | 2 +
drivers/gpu/drm/amd/amdkfd/kfd_topology.c | 3 +-
drivers/iommu/amd_iommu.c | 2 +-
drivers/iommu/dma-iommu.c | 35 +-
drivers/iommu/intel-iommu.c | 2 +-
drivers/iommu/intel_irq_remapping.c | 2 +-
drivers/misc/pci_endpoint_test.c | 18 +
drivers/net/ethernet/realtek/r8169.c | 3 +-
drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 2 +-
drivers/pci/Makefile | 2 +-
drivers/pci/bus.c | 5 +-
drivers/pci/controller/dwc/Kconfig | 29 +-
drivers/pci/controller/dwc/Makefile | 1 +
drivers/pci/controller/dwc/pci-dra7xx.c | 3 +-
drivers/pci/controller/dwc/pci-imx6.c | 144 ++--
drivers/pci/controller/dwc/pci-keystone.c | 926 +++++++++++++++------
drivers/pci/controller/dwc/pci-layerscape-ep.c | 2 +-
drivers/pci/controller/dwc/pci-layerscape.c | 1 +
drivers/pci/controller/dwc/pcie-al.c | 93 +++
drivers/pci/controller/dwc/pcie-artpec6.c | 2 +-
drivers/pci/controller/dwc/pcie-designware-ep.c | 55 +-
drivers/pci/controller/dwc/pcie-designware-host.c | 157 ++--
drivers/pci/controller/dwc/pcie-designware-plat.c | 2 +-
drivers/pci/controller/dwc/pcie-designware.c | 64 +-
drivers/pci/controller/dwc/pcie-designware.h | 26 +-
drivers/pci/controller/dwc/pcie-qcom.c | 23 +-
drivers/pci/controller/dwc/pcie-uniphier.c | 11 +-
drivers/pci/controller/pci-aardvark.c | 13 +-
drivers/pci/controller/pci-host-generic.c | 2 +-
drivers/pci/controller/pci-hyperv.c | 23 +
drivers/pci/controller/pci-tegra.c | 37 +-
drivers/pci/controller/pcie-iproc-msi.c | 2 +-
drivers/pci/controller/pcie-iproc.c | 98 ++-
drivers/pci/controller/pcie-mediatek.c | 51 +-
drivers/pci/controller/pcie-rcar.c | 85 +-
drivers/pci/controller/pcie-rockchip-ep.c | 2 +-
drivers/pci/controller/pcie-rockchip-host.c | 1 +
drivers/pci/controller/pcie-xilinx-nwl.c | 9 +-
drivers/pci/controller/pcie-xilinx.c | 12 +-
drivers/pci/endpoint/functions/pci-epf-test.c | 10 +-
drivers/pci/endpoint/pci-epf-core.c | 10 +-
drivers/pci/hotplug/pciehp.h | 31 +-
drivers/pci/hotplug/pciehp_core.c | 18 +-
drivers/pci/hotplug/pciehp_ctrl.c | 2 +
drivers/pci/hotplug/pciehp_hpc.c | 17 +-
drivers/pci/hotplug/pciehp_pci.c | 2 +
drivers/pci/hotplug/rpadlpar_core.c | 4 +
drivers/pci/hotplug/rpaphp_slot.c | 3 +-
drivers/pci/msi.c | 6 +-
drivers/pci/of.c | 58 +-
drivers/pci/p2pdma.c | 38 +-
drivers/pci/pci-acpi.c | 183 ++--
drivers/pci/pci-stub.c | 10 +-
drivers/pci/pci-sysfs.c | 3 +-
drivers/pci/pci.c | 344 ++++----
drivers/pci/pci.h | 2 +-
drivers/pci/pcie/aer.c | 30 +-
drivers/pci/pcie/aer_inject.c | 20 +-
drivers/pci/pcie/aspm.c | 47 +-
drivers/pci/pcie/bw_notification.c | 14 +
drivers/pci/pcie/dpc.c | 37 +-
drivers/pci/pcie/pme.c | 10 +-
drivers/pci/probe.c | 230 ++++-
drivers/pci/proc.c | 1 +
drivers/pci/quirks.c | 92 +-
drivers/pci/search.c | 10 +-
drivers/pci/setup-bus.c | 526 ++++++------
drivers/pci/slot.c | 2 +-
drivers/pci/switch/switchtec.c | 42 +-
drivers/pci/xen-pcifront.c | 9 +-
drivers/platform/chrome/chromeos_laptop.c | 2 +-
include/linux/acpi.h | 3 +-
include/linux/cper.h | 336 ++++----
include/linux/msi.h | 18 -
include/linux/pci-ecam.h | 1 +
include/linux/pci-epc.h | 2 +
include/linux/pci-epf.h | 3 +-
include/linux/pci.h | 9 +-
include/linux/pci_hotplug.h | 66 +-
include/linux/switchtec.h | 2 +-
include/uapi/linux/pci_regs.h | 138 +--
include/uapi/linux/switchtec_ioctl.h | 13 +-
tools/pci/Makefile | 8 +-
tools/pci/pcitest.c | 8 +-
92 files changed, 2911 insertions(+), 1621 deletions(-)
create mode 100644 drivers/pci/controller/dwc/pcie-al.c
next reply other threads:[~2019-05-13 23:57 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-13 23:57 Bjorn Helgaas [this message]
2019-05-14 17:50 ` [GIT PULL] PCI changes for v5.2 pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190513235721.GA157967@google.com \
--to=helgaas@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.