From: Jonathan Cameron <jic23@kernel.org>
To: gregkh@linuxfoundation.org, linux-iio@vger.kernel.org
Subject: [PULL] First set of new device support, features and cleanups for IIO in the 5.3 cycle.
Date: Sun, 19 May 2019 09:57:00 +0100 [thread overview]
Message-ID: <20190519095700.5ffbb7b4@archlinux> (raw)
The following changes since commit 575d927c426b83f5f8d5809f46de177cceffe40c:
LS1021A: dtsi: add ftm quad decoder entries (2019-04-25 21:33:42 +0200)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.3a
for you to fetch changes up to 6d97024dce236619b0bb85bdb5028019ed7fda56:
iio: adc: mediatek: mt6577-auxadc, add mt6765 support (2019-05-19 09:18:30 +0100)
----------------------------------------------------------------
First set of new device support, features and cleanups for IIO in the 5.3 cycle
New device support
* mt6577
- add supprot for the mt6765 which requires a few minor additional
new features in the driver.
Yaml binding conversions
* adxl345
* isl29018
* tsl2583
* tsl2772
Minor features and improvements
* ad5758
- declare an of_device_id table rather than just relying on the spi
fallback which doesn't use the manufacturer id.
- drop a set but not used variable left from previous refactor.
* ad7816
- Add a bit more description to kconfig text.
* ad9523
- change calculation order to improve frequency accuracy.
* adxl372
- declare an of_device_id table
* adt7316
- white space.
* at91_adc
- Use dev_get_drvdata directly rather than boucing to the platform device
and back again.
* cros_ec
- add an id sysfs entry to bring in line with the other implementations.
* ds5522
- drop a check on the of_node existing as we don't actually use it for
anything.
* kxsd9
- declare an of_device_id table.
* maxim_thermocouple
- declare an of_device_id table.
* mt6577
- add dt binding entry for mt8183 which is also supported.
* rcar-gyroadc
- tidy up unnecessary error messages.
* stm32-dfsdm
- improved error handling.
* stmpe-adc
- drop an unnecessary variable assignment.
- add an of_device_id table.
- reinit completion on begin converstion to avoid a path in which
previous round had been interrupted, also switch to non interruptible
wait to avoid an issue with a user program using -pg
- simplify interrupt handling by just having them always enabled.
- reset all interrupts on startup and in the timeout handler to
avoid getting stuck.
* sun4i-gpadc
- SPDX
----------------------------------------------------------------
Alexandru Ardelean (1):
dt-bindings: iio: accel: adxl345: switch to YAML bindings
Brian Masney (3):
dt-bindings: iio: tsl2583: convert bindings to YAML format
dt-bindings: iio: tsl2772: convert bindings to YAML format
dt-bindings: iio: isl29018: convert bindings to YAML format
Chun-Hung Wu (2):
dt-bindings: iio: adc: mediatek: Add document for mt6765
iio: adc: mediatek: mt6577-auxadc, add mt6765 support
Daniel Gomez (4):
iio: temperature: maxim_thermocouple: declare missing of table
iio: accel: kxsd9: declare missing of table
iio: adxl372: declare missing of table
iio: dac: ad5758: declare missing of table
Fabien Dessenne (2):
iio: adc: stm32-dfsdm: manage the get_irq error case
iio: adc: stm32-dfsdm: missing error case during probe
Geert Uytterhoeven (1):
iio: adc: rcar-gyroadc: Remove devm_iio_device_alloc() error printing
Gwendal Grignou (1):
iio: cros_ec: add 'id' sysfs entry
João Seckler (1):
staging: iio: adt7316: match parenthesis alignment
Kefeng Wang (1):
iio: adc: at91: Use dev_get_drvdata()
Lars-Peter Clausen (1):
iio: ad9523-1: Improve reported VCO frequency accuracy
Philippe Schenker (6):
iio: stmpe-adc: Remove unnecessary assignment
iio: stmpe-adc: Add compatible name
iio: stmpe-adc: Reinit completion struct on begin conversion
iio: stmpe-adc: Enable all stmpe-adc interrupts just once
iio: stmpe-adc: Use wait_for_completion_timeout
iio: stmpe-adc: Reset possible interrupts
Ruslan Babayev (1):
iio: dac: ds4422/ds4424 drop of_node check
Vatsala Narang (1):
staging: iio: adc: Add paragraph to describe Kconfig symbol
Yangtao Li (1):
iio: adc: sun4i-gpadc-iio convert to SPDX license tags
YueHaibing (1):
iio: dac: ad5758: remove set but not used variable 'dc_dc_mode'
Zhiyong Tao (1):
dt-bindings: adc: mt8183: add binding document
Documentation/ABI/testing/sysfs-bus-iio-cros-ec | 10 +--
.../devicetree/bindings/iio/accel/adi,adxl345.yaml | 72 +++++++++++++++++++
.../devicetree/bindings/iio/accel/adxl345.txt | 39 ----------
.../devicetree/bindings/iio/adc/mt6577_auxadc.txt | 2 +
.../devicetree/bindings/iio/light/isl29018.txt | 27 -------
.../devicetree/bindings/iio/light/isl29018.yaml | 56 +++++++++++++++
.../devicetree/bindings/iio/light/tsl2583.txt | 25 -------
.../devicetree/bindings/iio/light/tsl2583.yaml | 46 ++++++++++++
.../devicetree/bindings/iio/light/tsl2772.txt | 42 -----------
.../devicetree/bindings/iio/light/tsl2772.yaml | 83 ++++++++++++++++++++++
MAINTAINERS | 1 +
drivers/iio/accel/adxl372_spi.c | 9 +++
drivers/iio/accel/kxsd9-spi.c | 9 +++
drivers/iio/adc/at91-sama5d2_adc.c | 12 ++--
drivers/iio/adc/at91_adc.c | 4 +-
drivers/iio/adc/mt6577_auxadc.c | 54 ++++++++++----
drivers/iio/adc/rcar-gyroadc.c | 4 +-
drivers/iio/adc/stm32-dfsdm-adc.c | 6 ++
drivers/iio/adc/stm32-dfsdm-core.c | 8 ++-
drivers/iio/adc/stmpe-adc.c | 40 ++++++-----
drivers/iio/adc/sun4i-gpadc-iio.c | 5 +-
.../common/cros_ec_sensors/cros_ec_sensors_core.c | 14 ++++
drivers/iio/dac/ad5758.c | 18 +++--
drivers/iio/dac/ds4424.c | 6 --
drivers/iio/frequency/ad9523.c | 8 ++-
drivers/iio/temperature/maxim_thermocouple.c | 10 +++
drivers/staging/iio/adc/Kconfig | 3 +
drivers/staging/iio/addac/adt7316.c | 2 +-
28 files changed, 411 insertions(+), 204 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
delete mode 100644 Documentation/devicetree/bindings/iio/accel/adxl345.txt
delete mode 100644 Documentation/devicetree/bindings/iio/light/isl29018.txt
create mode 100644 Documentation/devicetree/bindings/iio/light/isl29018.yaml
delete mode 100644 Documentation/devicetree/bindings/iio/light/tsl2583.txt
create mode 100644 Documentation/devicetree/bindings/iio/light/tsl2583.yaml
delete mode 100644 Documentation/devicetree/bindings/iio/light/tsl2772.txt
create mode 100644 Documentation/devicetree/bindings/iio/light/tsl2772.yaml
next reply other threads:[~2019-05-19 17:12 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-19 8:57 Jonathan Cameron [this message]
2019-05-20 7:14 ` [PULL] First set of new device support, features and cleanups for IIO in the 5.3 cycle Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190519095700.5ffbb7b4@archlinux \
--to=jic23@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.