From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Wed, 22 May 2019 11:15:04 -0400 Subject: [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2 In-Reply-To: References: <20190522023410.GS22232@bill-the-cat> Message-ID: <20190522151504.GU22232@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wed, May 22, 2019 at 11:23:11AM -0300, Fabio Estevam wrote: > On Tue, May 21, 2019 at 11:34 PM Tom Rini wrote: > > > As came up in another thread, CONFIG_MMC_TINY may be more widely useable > > and should help with space. > > How it can be used exactly? > > I tried it like this: > > --- a/configs/mx6sabresd_defconfig > +++ b/configs/mx6sabresd_defconfig > @@ -6,7 +6,6 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y > CONFIG_SPL_LIBGENERIC_SUPPORT=y > CONFIG_SYS_MALLOC_F_LEN=0x4000 > CONFIG_TARGET_MX6SABRESD=y > -CONFIG_SPL_MMC_SUPPORT=y > CONFIG_SPL_SERIAL_SUPPORT=y > CONFIG_NR_DRAM_BANKS=1 > CONFIG_SPL=y > @@ -100,3 +99,4 @@ CONFIG_USB_HOST_ETHER=y > CONFIG_USB_ETHER_ASIX=y > CONFIG_DM_VIDEO=y > CONFIG_VIDEO_IPUV3=y > +CONFIG_SPL_MMC_TINY=y > > , but the board does not boot: > > U-Boot SPL 2019.07-rc2-00164-ge1a2ed7180-dirty (May 22 2019 - 11:19:41 -0300) > SPL: Unsupported Boot Device! > SPL: failed to boot from all boot devices > ### ERROR ### Please RESET the board ### Yes, I was hoping to get Marek or Ezequiel to speak up a bit more on how to configure / use it, in the other thread. -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: