From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Thu, 23 May 2019 09:59:05 -0400 Subject: [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2 In-Reply-To: References: Message-ID: <20190523135905.GY22232@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thu, May 23, 2019 at 10:49:11AM -0300, Fabio Estevam wrote: > Hi Peng, > > On Tue, May 21, 2019 at 10:38 PM Peng Fan wrote: > > > > I will send a v2 removing CONFIG_SPL_DM. > > > > So what is the real direction moving to use SPL driver, non-dm is allowed in future? > > We are very limited in space when CONFIG_SPL_DM is used on imx6q-sabresd. > > With CONFIG_SPL_DM selected the size increase due to the three dtb's > is about 8kB. > > Even with CONFIG_SPL_DM disabled we ony have 1kB of free space, so I > still want to optimize the size further. So with CONFIG_SPL_DM we're overflowing by ~7kB? > Two options that I want also to remove are: > > CONFIG_SPL_FS_EXT4=y > CONFIG_SPL_I2C_SUPPORT=y > > We are at -rc2 now, and I would really like to have mx6sabresd booting again. > > Please check my v2 series and see if it looks good. We certainly want to do something to fix the regression, agreed. Looking at the config, can we just use a fake DTB for SPL that works on all 3 boards, rather than 3 DTBs? -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: