From: David Ahern <dsahern@kernel.org>
To: davem@davemloft.net, netdev@vger.kernel.org
Cc: sharpd@cumulusnetworks.com, sworley@cumulusnetworks.com,
David Ahern <dsahern@gmail.com>
Subject: [PATCH net-next 1/6] net: nexthop uapi
Date: Fri, 24 May 2019 14:43:03 -0700 [thread overview]
Message-ID: <20190524214308.18615-2-dsahern@kernel.org> (raw)
In-Reply-To: <20190524214308.18615-1-dsahern@kernel.org>
From: David Ahern <dsahern@gmail.com>
New UAPI for nexthops as standalone objects:
- defines netlink ancillary header, struct nhmsg
- RTM commands for nexthop objects, RTM_*NEXTHOP,
- RTNLGRP for nexthop notifications, RTNLGRP_NEXTHOP,
- Attributes for creating nexthops, NHA_*
- Attribute for route specs to specify a nexthop by id, RTA_NH_ID.
The nexthop attributes and semantics follow the route and RTA ones for
device, gateway and lwt encap. Unique to nexthop objects are a blackhole
and a group which contains references to other nexthop objects. With the
exception of blackhole and group, nexthop objects MUST contain a device.
Gateway and encap are optional. Nexthop groups can only reference other
pre-existing nexthops by id. If the NHA_ID attribute is present that id
is used for the nexthop. If not specified, one is auto assigned.
Dump requests can include attributes:
- NHA_GROUPS to return only nexthop groups,
- NHA_MASTER to limit dumps to nexthops with devices enslaved to the
given master (e.g., VRF)
- NHA_OIF to limit dumps to nexthops using given device
nlmsg_route_perms in selinux code is updated for the new RTM comands.
Signed-off-by: David Ahern <dsahern@gmail.com>
---
include/uapi/linux/nexthop.h | 56 ++++++++++++++++++++++++++++++++++++++++++
include/uapi/linux/rtnetlink.h | 10 ++++++++
security/selinux/nlmsgtab.c | 5 +++-
3 files changed, 70 insertions(+), 1 deletion(-)
create mode 100644 include/uapi/linux/nexthop.h
diff --git a/include/uapi/linux/nexthop.h b/include/uapi/linux/nexthop.h
new file mode 100644
index 000000000000..7b61867e9848
--- /dev/null
+++ b/include/uapi/linux/nexthop.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_LINUX_NEXTHOP_H
+#define _UAPI_LINUX_NEXTHOP_H
+
+#include <linux/types.h>
+
+struct nhmsg {
+ unsigned char nh_family;
+ unsigned char nh_scope; /* return only */
+ unsigned char nh_protocol; /* Routing protocol that installed nh */
+ unsigned char resvd;
+ unsigned int nh_flags; /* RTNH_F flags */
+};
+
+/* entry in a nexthop group */
+struct nexthop_grp {
+ __u32 id; /* nexthop id - must exist */
+ __u8 weight; /* weight of this nexthop */
+ __u8 resvd1;
+ __u16 resvd2;
+};
+
+enum {
+ NEXTHOP_GRP_TYPE_MPATH, /* default type if not specified */
+ __NEXTHOP_GRP_TYPE_MAX,
+};
+
+#define NEXTHOP_GRP_TYPE_MAX (__NEXTHOP_GRP_TYPE_MAX - 1)
+
+enum {
+ NHA_UNSPEC,
+ NHA_ID, /* u32; id for nexthop. id == 0 means auto-assign */
+
+ NHA_GROUP, /* array of nexthop_grp */
+ NHA_GROUP_TYPE, /* u16 one of NEXTHOP_GRP_TYPE */
+ /* if NHA_GROUP attribute is added, no other attributes can be set */
+
+ NHA_BLACKHOLE, /* flag; nexthop used to blackhole packets */
+ /* if NHA_BLACKHOLE is added, OIF, GATEWAY, ENCAP can not be set */
+
+ NHA_OIF, /* u32; nexthop device */
+ NHA_GATEWAY, /* be32 (IPv4) or in6_addr (IPv6) gw address */
+ NHA_ENCAP_TYPE, /* u16; lwt encap type */
+ NHA_ENCAP, /* lwt encap data */
+
+ /* NHA_OIF can be appended to dump request to return only
+ * nexthops using given device
+ */
+ NHA_GROUPS, /* flag; only return nexthop groups in dump */
+ NHA_MASTER, /* u32; only return nexthops with given master dev */
+
+ __NHA_MAX,
+};
+
+#define NHA_MAX (__NHA_MAX - 1)
+#endif
diff --git a/include/uapi/linux/rtnetlink.h b/include/uapi/linux/rtnetlink.h
index 46399367627f..ce2a623abb75 100644
--- a/include/uapi/linux/rtnetlink.h
+++ b/include/uapi/linux/rtnetlink.h
@@ -157,6 +157,13 @@ enum {
RTM_GETCHAIN,
#define RTM_GETCHAIN RTM_GETCHAIN
+ RTM_NEWNEXTHOP = 104,
+#define RTM_NEWNEXTHOP RTM_NEWNEXTHOP
+ RTM_DELNEXTHOP,
+#define RTM_DELNEXTHOP RTM_DELNEXTHOP
+ RTM_GETNEXTHOP,
+#define RTM_GETNEXTHOP RTM_GETNEXTHOP
+
__RTM_MAX,
#define RTM_MAX (((__RTM_MAX + 3) & ~3) - 1)
};
@@ -342,6 +349,7 @@ enum rtattr_type_t {
RTA_IP_PROTO,
RTA_SPORT,
RTA_DPORT,
+ RTA_NH_ID,
__RTA_MAX
};
@@ -704,6 +712,8 @@ enum rtnetlink_groups {
#define RTNLGRP_IPV4_MROUTE_R RTNLGRP_IPV4_MROUTE_R
RTNLGRP_IPV6_MROUTE_R,
#define RTNLGRP_IPV6_MROUTE_R RTNLGRP_IPV6_MROUTE_R
+ RTNLGRP_NEXTHOP,
+#define RTNLGRP_NEXTHOP RTNLGRP_NEXTHOP
__RTNLGRP_MAX
};
#define RTNLGRP_MAX (__RTNLGRP_MAX - 1)
diff --git a/security/selinux/nlmsgtab.c b/security/selinux/nlmsgtab.c
index 9cec81209617..2c75d823d8e2 100644
--- a/security/selinux/nlmsgtab.c
+++ b/security/selinux/nlmsgtab.c
@@ -83,6 +83,9 @@ static const struct nlmsg_perm nlmsg_route_perms[] =
{ RTM_NEWCHAIN, NETLINK_ROUTE_SOCKET__NLMSG_WRITE },
{ RTM_DELCHAIN, NETLINK_ROUTE_SOCKET__NLMSG_WRITE },
{ RTM_GETCHAIN, NETLINK_ROUTE_SOCKET__NLMSG_READ },
+ { RTM_NEWNEXTHOP, NETLINK_ROUTE_SOCKET__NLMSG_WRITE },
+ { RTM_DELNEXTHOP, NETLINK_ROUTE_SOCKET__NLMSG_WRITE },
+ { RTM_GETNEXTHOP, NETLINK_ROUTE_SOCKET__NLMSG_READ },
};
static const struct nlmsg_perm nlmsg_tcpdiag_perms[] =
@@ -166,7 +169,7 @@ int selinux_nlmsg_lookup(u16 sclass, u16 nlmsg_type, u32 *perm)
* structures at the top of this file with the new mappings
* before updating the BUILD_BUG_ON() macro!
*/
- BUILD_BUG_ON(RTM_MAX != (RTM_NEWCHAIN + 3));
+ BUILD_BUG_ON(RTM_MAX != (RTM_NEWNEXTHOP + 3));
err = nlmsg_perm(nlmsg_type, perm, nlmsg_route_perms,
sizeof(nlmsg_route_perms));
break;
--
2.11.0
next prev parent reply other threads:[~2019-05-24 21:43 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-24 21:43 [PATCH net-next 0/6] net: API and initial implementation for nexthop objects David Ahern
2019-05-24 21:43 ` David Ahern [this message]
2019-05-24 21:43 ` [PATCH net-next 2/6] net: Initial nexthop code David Ahern
2019-05-24 21:43 ` [PATCH net-next 3/6] nexthop: Add support for IPv4 nexthops David Ahern
2019-05-24 21:43 ` [PATCH net-next 4/6] nexthop: Add support for IPv6 gateways David Ahern
2019-05-24 21:43 ` [PATCH net-next 5/6] nexthop: Add support for lwt encaps David Ahern
2019-05-24 21:43 ` [PATCH net-next 6/6] nexthop: Add support for nexthop groups David Ahern
2019-05-29 4:38 ` [PATCH net-next 0/6] net: API and initial implementation for nexthop objects David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190524214308.18615-2-dsahern@kernel.org \
--to=dsahern@kernel.org \
--cc=davem@davemloft.net \
--cc=dsahern@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=sharpd@cumulusnetworks.com \
--cc=sworley@cumulusnetworks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.