From: Derald D. Woods <woods.technical@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/3] ARM: dts: omap3-evm: Sync dts(i) files from Linux 5.1.5
Date: Mon, 27 May 2019 21:19:38 -0500 [thread overview]
Message-ID: <20190528021938.GA14617@ethiopia> (raw)
Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
---
arch/arm/dts/omap3-evm-37xx.dts | 8 ++++----
arch/arm/dts/omap3-evm-common.dtsi | 7 +++++--
arch/arm/dts/omap3-evm-processor-common.dtsi | 10 +++++++++-
3 files changed, 18 insertions(+), 7 deletions(-)
diff --git a/arch/arm/dts/omap3-evm-37xx.dts b/arch/arm/dts/omap3-evm-37xx.dts
index 5a4ba0aea4..a14303b09a 100644
--- a/arch/arm/dts/omap3-evm-37xx.dts
+++ b/arch/arm/dts/omap3-evm-37xx.dts
@@ -90,19 +90,19 @@
label = "X-Loader";
reg = <0 0x80000>;
};
- partition at 0x80000 {
+ partition at 80000 {
label = "U-Boot";
reg = <0x80000 0x1c0000>;
};
- partition at 0x1c0000 {
+ partition at 1c0000 {
label = "Environment";
reg = <0x240000 0x40000>;
};
- partition at 0x280000 {
+ partition at 280000 {
label = "Kernel";
reg = <0x280000 0x500000>;
};
- partition at 0x780000 {
+ partition at 780000 {
label = "Filesystem";
reg = <0x780000 0x1f880000>;
};
diff --git a/arch/arm/dts/omap3-evm-common.dtsi b/arch/arm/dts/omap3-evm-common.dtsi
index ee64191e41..17c89df6ce 100644
--- a/arch/arm/dts/omap3-evm-common.dtsi
+++ b/arch/arm/dts/omap3-evm-common.dtsi
@@ -122,6 +122,7 @@
};
&mmc2 {
+ interrupts-extended = <&intc 86 &omap3_pmx_core 0x12e>;
vmmc-supply = <&wl12xx_vmmc>;
non-removable;
bus-width = <4>;
@@ -132,8 +133,10 @@
wlcore: wlcore at 2 {
compatible = "ti,wl1271";
reg = <2>;
- interrupt-parent = <&gpio5>;
- interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 149 */
+ /* gpio_149 with uart1_rts pad as wakeirq */
+ interrupts-extended = <&gpio5 21 IRQ_TYPE_EDGE_RISING>,
+ <&omap3_pmx_core 0x14e>;
+ interrupt-names = "irq", "wakeup";
ref-clock-frequency = <38400000>;
};
};
diff --git a/arch/arm/dts/omap3-evm-processor-common.dtsi b/arch/arm/dts/omap3-evm-processor-common.dtsi
index ce7f42f944..b4109f48ec 100644
--- a/arch/arm/dts/omap3-evm-processor-common.dtsi
+++ b/arch/arm/dts/omap3-evm-processor-common.dtsi
@@ -86,6 +86,10 @@
OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
+ OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat4.sdmmc2_dir_dat0 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat5.sdmmc2_dir_dat1 */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat6.sdmmc2_dir_cmd */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* sdmmc2_dat7.sdmmc2_clkin */
>;
};
@@ -127,9 +131,13 @@
>;
};
+ /*
+ * Note that gpio_150 pulled high with internal pull to prevent wlcore
+ * reset on return from off mode in idle.
+ */
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */
+ OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_cts.gpio_150 */
OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4) /* uart1_rts.gpio_149 */
>;
};
--
2.21.0
next reply other threads:[~2019-05-28 2:19 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-28 2:19 Derald D. Woods [this message]
2019-07-14 13:07 ` [U-Boot] [PATCH 1/3] ARM: dts: omap3-evm: Sync dts(i) files from Linux 5.1.5 Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190528021938.GA14617@ethiopia \
--to=woods.technical@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.