From: Lukasz Majewski <lukma@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [v3, 1/5] Move CONFIG_FSL_ESDHC to defconfig
Date: Wed, 29 May 2019 08:23:27 +0200 [thread overview]
Message-ID: <20190529082327.67d15aed@jawa> (raw)
In-Reply-To: <20190521085215.6263-2-yangbo.lu@nxp.com>
On Tue, 21 May 2019 08:51:42 +0000
"Y.b. Lu" <yangbo.lu@nxp.com> wrote:
> Moved CONFIG_FSL_ESDHC from header files to defconfig files.
>
> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
> ---
> Changes for v2:
> - Rebased.
> Changes for v3:
> - Rebased.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
> ---
> configs/imx8mq_evk_defconfig | 1 +
> configs/imx8qm_mek_defconfig | 1 +
> configs/imx8qxp_mek_defconfig | 1 +
> configs/kp_imx6q_tpc_defconfig | 1 +
> configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig | 1 +
> configs/ls1012afrwy_qspi_defconfig | 1 +
> configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig | 1 +
> configs/ls1012afrwy_tfa_defconfig | 1 +
> include/configs/imx8mq_evk.h | 1 -
> include/configs/imx8qm_mek.h | 1 -
> include/configs/imx8qxp_mek.h | 1 -
> include/configs/kp_imx6q_tpc.h | 1 -
> include/configs/ls1012afrwy.h | 1 -
> 13 files changed, 8 insertions(+), 5 deletions(-)
>
> diff --git a/configs/imx8mq_evk_defconfig
> b/configs/imx8mq_evk_defconfig index 7383124851..534cf96c58 100644
> --- a/configs/imx8mq_evk_defconfig
> +++ b/configs/imx8mq_evk_defconfig
> @@ -31,6 +31,7 @@ CONFIG_DM_GPIO=y
> CONFIG_DM_I2C=y
> CONFIG_SYS_I2C_MXC=y
> CONFIG_DM_MMC=y
> +CONFIG_FSL_ESDHC=y
> CONFIG_SUPPORT_EMMC_BOOT=y
> CONFIG_DM_ETH=y
> CONFIG_PINCTRL=y
> diff --git a/configs/imx8qm_mek_defconfig
> b/configs/imx8qm_mek_defconfig index 1a6ce3abf8..173568c0da 100644
> --- a/configs/imx8qm_mek_defconfig
> +++ b/configs/imx8qm_mek_defconfig
> @@ -52,6 +52,7 @@ CONFIG_I2C_MUX=y
> CONFIG_I2C_MUX_PCA954x=y
> CONFIG_MISC=y
> CONFIG_DM_MMC=y
> +CONFIG_FSL_ESDHC=y
> CONFIG_PHYLIB=y
> CONFIG_PHY_ADDR_ENABLE=y
> CONFIG_PHY_ATHEROS=y
> diff --git a/configs/imx8qxp_mek_defconfig
> b/configs/imx8qxp_mek_defconfig index c4a8cf3881..7021bd5da8 100644
> --- a/configs/imx8qxp_mek_defconfig
> +++ b/configs/imx8qxp_mek_defconfig
> @@ -55,6 +55,7 @@ CONFIG_I2C_MUX=y
> CONFIG_I2C_MUX_PCA954x=y
> CONFIG_MISC=y
> CONFIG_DM_MMC=y
> +CONFIG_FSL_ESDHC=y
> CONFIG_SUPPORT_EMMC_BOOT=y
> CONFIG_PHYLIB=y
> CONFIG_PHY_ADDR_ENABLE=y
> diff --git a/configs/kp_imx6q_tpc_defconfig
> b/configs/kp_imx6q_tpc_defconfig index 0ca83cbfea..9b6ff4a85b 100644
> --- a/configs/kp_imx6q_tpc_defconfig
> +++ b/configs/kp_imx6q_tpc_defconfig
> @@ -34,6 +34,7 @@ CONFIG_CMD_EXT4_WRITE=y
> # CONFIG_ISO_PARTITION is not set
> # CONFIG_EFI_PARTITION is not set
> CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_FSL_ESDHC=y
> CONFIG_PHYLIB=y
> CONFIG_PHY_ATHEROS=y
> CONFIG_FEC_MXC=y
> diff --git a/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig
> b/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig index
> bf98466576..0360d9d4e8 100644 ---
> a/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig +++
> b/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig @@ -31,6 +31,7 @@
> CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y
> CONFIG_SATA_CEVA=y
> CONFIG_DM_MMC=y
> +CONFIG_FSL_ESDHC=y
> CONFIG_DM_SPI_FLASH=y
> CONFIG_SPI_FLASH=y
> CONFIG_SPI_FLASH_WINBOND=y
> diff --git a/configs/ls1012afrwy_qspi_defconfig
> b/configs/ls1012afrwy_qspi_defconfig index aa3256fb43..08eedec827
> 100644 --- a/configs/ls1012afrwy_qspi_defconfig
> +++ b/configs/ls1012afrwy_qspi_defconfig
> @@ -32,6 +32,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
> CONFIG_DM=y
> CONFIG_SATA_CEVA=y
> CONFIG_DM_MMC=y
> +CONFIG_FSL_ESDHC=y
> CONFIG_DM_SPI_FLASH=y
> CONFIG_SPI_FLASH=y
> CONFIG_SPI_FLASH_WINBOND=y
> diff --git a/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig
> b/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig index
> b0fdad6dd0..2c3d8931e7 100644 ---
> a/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig +++
> b/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig @@ -31,6 +31,7 @@
> CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y
> CONFIG_SATA_CEVA=y
> CONFIG_DM_MMC=y
> +CONFIG_FSL_ESDHC=y
> CONFIG_DM_SPI_FLASH=y
> CONFIG_SPI_FLASH=y
> CONFIG_SPI_FLASH_WINBOND=y
> diff --git a/configs/ls1012afrwy_tfa_defconfig
> b/configs/ls1012afrwy_tfa_defconfig index 6a70f5881b..19aae5aa1a
> 100644 --- a/configs/ls1012afrwy_tfa_defconfig
> +++ b/configs/ls1012afrwy_tfa_defconfig
> @@ -32,6 +32,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
> CONFIG_DM=y
> CONFIG_SATA_CEVA=y
> CONFIG_DM_MMC=y
> +CONFIG_FSL_ESDHC=y
> CONFIG_DM_SPI_FLASH=y
> CONFIG_SPI_FLASH=y
> CONFIG_SPI_FLASH_WINBOND=y
> diff --git a/include/configs/imx8mq_evk.h
> b/include/configs/imx8mq_evk.h index e4fa2df342..16e4136fa9 100644
> --- a/include/configs/imx8mq_evk.h
> +++ b/include/configs/imx8mq_evk.h
> @@ -216,7 +216,6 @@
> #define CONFIG_IMX_BOOTAUX
>
> #define CONFIG_CMD_MMC
> -#define CONFIG_FSL_ESDHC
> #define CONFIG_FSL_USDHC
>
> #define CONFIG_SYS_FSL_USDHC_NUM 2
> diff --git a/include/configs/imx8qm_mek.h
> b/include/configs/imx8qm_mek.h index 2bdf3be654..3679b487e1 100644
> --- a/include/configs/imx8qm_mek.h
> +++ b/include/configs/imx8qm_mek.h
> @@ -47,7 +47,6 @@
> #undef CONFIG_CMD_CRC32
> #undef CONFIG_BOOTM_NETBSD
>
> -#define CONFIG_FSL_ESDHC
> #define CONFIG_FSL_USDHC
> #define CONFIG_SYS_FSL_ESDHC_ADDR 0
> #define USDHC1_BASE_ADDR 0x5B010000
> diff --git a/include/configs/imx8qxp_mek.h
> b/include/configs/imx8qxp_mek.h index 261661a978..18cc930de2 100644
> --- a/include/configs/imx8qxp_mek.h
> +++ b/include/configs/imx8qxp_mek.h
> @@ -46,7 +46,6 @@
> #undef CONFIG_CMD_CRC32
> #undef CONFIG_BOOTM_NETBSD
>
> -#define CONFIG_FSL_ESDHC
> #define CONFIG_FSL_USDHC
> #define CONFIG_SYS_FSL_ESDHC_ADDR 0
> #define USDHC1_BASE_ADDR 0x5B010000
> diff --git a/include/configs/kp_imx6q_tpc.h
> b/include/configs/kp_imx6q_tpc.h index d2ebf92953..dbae276121 100644
> --- a/include/configs/kp_imx6q_tpc.h
> +++ b/include/configs/kp_imx6q_tpc.h
> @@ -39,7 +39,6 @@
> #define CONFIG_SYS_I2C_SPEED 100000
>
> /* MMC Configs */
> -#define CONFIG_FSL_ESDHC
> #define CONFIG_FSL_USDHC
> #define CONFIG_SYS_FSL_ESDHC_ADDR 0
> #define CONFIG_SYS_FSL_USDHC_NUM 2
> diff --git a/include/configs/ls1012afrwy.h
> b/include/configs/ls1012afrwy.h index ebb1df41c7..2ee94d68fd 100644
> --- a/include/configs/ls1012afrwy.h
> +++ b/include/configs/ls1012afrwy.h
> @@ -41,7 +41,6 @@
>
> /* MMC */
> #ifdef CONFIG_MMC
> -#define CONFIG_FSL_ESDHC
> #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
> #endif
>
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190529/e2abb238/attachment.sig>
next prev parent reply other threads:[~2019-05-29 6:23 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-21 8:51 [U-Boot] [v3, 0/5] Split fsl_esdhc driver for i.MX Y.b. Lu
2019-05-21 8:51 ` [U-Boot] [v3, 1/5] Move CONFIG_FSL_ESDHC to defconfig Y.b. Lu
2019-05-29 1:34 ` Peng Fan
2019-05-29 1:46 ` Jason Liu
2019-05-29 6:23 ` Lukasz Majewski [this message]
2019-05-21 8:52 ` [U-Boot] [v3, 2/5] mmc: split fsl_esdhc driver for i.MX Y.b. Lu
2019-05-29 1:42 ` Peng Fan
2019-05-29 6:29 ` Lukasz Majewski
2019-05-29 7:10 ` Y.b. Lu
2019-05-29 12:22 ` Y.b. Lu
2019-05-21 8:52 ` [U-Boot] [v3, 3/5] Convert to use fsl_esdhc_imx for i.MX platforms Y.b. Lu
2019-05-29 1:46 ` Peng Fan
2019-05-29 1:47 ` Jason Liu
2019-05-29 6:31 ` Lukasz Majewski
2019-05-21 8:52 ` [U-Boot] [v3, 4/5] mmc: fsl_esdhc: drop i.MX code Y.b. Lu
2019-05-29 1:47 ` Peng Fan
2019-05-29 6:40 ` Lukasz Majewski
2019-05-29 7:34 ` Y.b. Lu
2019-05-21 8:53 ` [U-Boot] [v3, 5/5] mmc: fsl_esdhc_imx: drop useless code Y.b. Lu
2019-05-29 1:53 ` Peng Fan
2019-05-29 6:09 ` Y.b. Lu
2019-05-29 6:16 ` Peng Fan
2019-05-29 6:42 ` Lukasz Majewski
2019-05-29 7:37 ` Y.b. Lu
2019-05-30 18:23 ` Angelo Dureghello
2019-05-31 5:58 ` Peng Fan
2019-05-31 6:12 ` Y.b. Lu
2019-05-31 7:15 ` Angelo Dureghello
2019-06-03 4:28 ` Y.b. Lu
2019-06-22 21:42 ` Angelo Dureghello
2019-06-24 1:23 ` Y.b. Lu
2019-06-24 9:26 ` Angelo Dureghello
2019-06-24 2:05 ` Marek Vasut
2019-05-23 8:36 ` [U-Boot] [v3, 0/5] Split fsl_esdhc driver for i.MX linux-kernel-dev
2019-05-23 9:15 ` Lukasz Majewski
2019-05-29 6:21 ` Lukasz Majewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190529082327.67d15aed@jawa \
--to=lukma@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.