All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sean Christopherson <sean.j.christopherson@intel.com>
To: Yang Weijiang <weijiang.yang@intel.com>
Cc: pbonzini@redhat.com, mst@redhat.com, rkrcmar@redhat.com,
	jmattson@google.com, linux-kernel@vger.kernel.org,
	kvm@vger.kernel.org, yu-cheng.yu@intel.com
Subject: Re: [PATCH v5 4/8] KVM: VMX: Pass through CET related MSRs to Guest
Date: Tue, 4 Jun 2019 12:59:02 -0700	[thread overview]
Message-ID: <20190604195902.GB7476@linux.intel.com> (raw)
In-Reply-To: <20190522070101.7636-5-weijiang.yang@intel.com>

On Wed, May 22, 2019 at 03:00:57PM +0800, Yang Weijiang wrote:
> CET MSRs pass through Guest directly to enhance performance.
> CET runtime control settings are stored in MSR_IA32_{U,S}_CET,
> Shadow Stack Pointer(SSP) are presented in MSR_IA32_PL{0,1,2,3}_SSP,
> SSP table base address is stored in MSR_IA32_INT_SSP_TAB,
> these MSRs are defined in kernel and re-used here.
> 
> MSR_IA32_U_CET and MSR_IA32_PL3_SSP are used for user mode protection,
> the contents could differ from process to process, therefore,
> kernel needs to save/restore them during context switch, so it makes
> sense to pass through them so that the guest kernel can
> use xsaves/xrstors to operate them efficiently. Ohter MSRs are used
> for non-user mode protection. See CET spec for detailed info.
> 
> The difference between CET VMCS state fields and xsave components is,
> the former used for CET state storage during VMEnter/VMExit,
> whereas the latter used for state retention between Guest task/process
> switch.
> 
> Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
> Co-developed-by: Zhang Yi Z <yi.z.zhang@linux.intel.com>
> ---
>  arch/x86/kvm/vmx/vmx.c | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
> index 574428375ff9..9321da538f65 100644
> --- a/arch/x86/kvm/vmx/vmx.c
> +++ b/arch/x86/kvm/vmx/vmx.c
> @@ -6942,6 +6942,7 @@ static void update_intel_pt_cfg(struct kvm_vcpu *vcpu)
>  static void vmx_cpuid_update(struct kvm_vcpu *vcpu)
>  {
>  	struct vcpu_vmx *vmx = to_vmx(vcpu);
> +	unsigned long *msr_bitmap;
>  
>  	if (cpu_has_secondary_exec_ctrls()) {
>  		vmx_compute_secondary_exec_control(vmx);
> @@ -6963,6 +6964,19 @@ static void vmx_cpuid_update(struct kvm_vcpu *vcpu)
>  	if (boot_cpu_has(X86_FEATURE_INTEL_PT) &&
>  			guest_cpuid_has(vcpu, X86_FEATURE_INTEL_PT))
>  		update_intel_pt_cfg(vcpu);
> +
> +	msr_bitmap = vmx->vmcs01.msr_bitmap;
> +
> +	if (guest_cpuid_has(vcpu, X86_FEATURE_SHSTK) ||
> +	    guest_cpuid_has(vcpu, X86_FEATURE_IBT)) {
> +		vmx_disable_intercept_for_msr(msr_bitmap, MSR_IA32_U_CET, MSR_TYPE_RW);
> +		vmx_disable_intercept_for_msr(msr_bitmap, MSR_IA32_S_CET, MSR_TYPE_RW);
> +		vmx_disable_intercept_for_msr(msr_bitmap, MSR_IA32_INT_SSP_TAB, MSR_TYPE_RW);
> +		vmx_disable_intercept_for_msr(msr_bitmap, MSR_IA32_PL0_SSP, MSR_TYPE_RW);
> +		vmx_disable_intercept_for_msr(msr_bitmap, MSR_IA32_PL1_SSP, MSR_TYPE_RW);
> +		vmx_disable_intercept_for_msr(msr_bitmap, MSR_IA32_PL2_SSP, MSR_TYPE_RW);
> +		vmx_disable_intercept_for_msr(msr_bitmap, MSR_IA32_PL3_SSP, MSR_TYPE_RW);
> +	}
>  }
>  
>  static void vmx_set_supported_cpuid(u32 func, struct kvm_cpuid_entry2 *entry)
> @@ -7163,6 +7177,7 @@ static void __pi_post_block(struct kvm_vcpu *vcpu)
>  		spin_unlock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu));
>  		vcpu->pre_pcpu = -1;
>  	}
> +

Spurious whitespace change.

>  }
>  
>  /*
> -- 
> 2.17.2
> 

  reply	other threads:[~2019-06-04 19:59 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-22  7:00 [PATCH v5 0/8] Introduce support for Guest CET feature Yang Weijiang
2019-05-22  7:00 ` [PATCH v5 1/8] KVM: VMX: Define CET VMCS fields and control bits Yang Weijiang
2019-06-04 14:46   ` Sean Christopherson
2019-06-05  2:30     ` Yang Weijiang
2019-05-22  7:00 ` [PATCH v5 2/8] KVM: x86: Implement CET CPUID support for Guest Yang Weijiang
2019-06-04 19:58   ` Sean Christopherson
2019-06-05  2:51     ` Yang Weijiang
2019-05-22  7:00 ` [PATCH v5 3/8] KVM: x86: Fix XSAVE size calculation issue Yang Weijiang
2019-05-22  7:00 ` [PATCH v5 4/8] KVM: VMX: Pass through CET related MSRs to Guest Yang Weijiang
2019-06-04 19:59   ` Sean Christopherson [this message]
2019-05-22  7:00 ` [PATCH v5 5/8] KVM: VMX: Load Guest CET via VMCS when CET is enabled in Guest Yang Weijiang
2019-06-04 20:03   ` Sean Christopherson
2019-06-05  1:49     ` Yang Weijiang
2019-05-22  7:00 ` [PATCH v5 6/8] KVM: x86: Allow Guest to set supported bits in XSS Yang Weijiang
2019-05-22  7:01 ` [PATCH v5 7/8] KVM: x86: Load Guest fpu state when accessing MSRs managed by XSAVES Yang Weijiang
2019-05-22  7:01 ` [PATCH v5 8/8] KVM: x86: Add user-space access interface for CET MSRs Yang Weijiang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190604195902.GB7476@linux.intel.com \
    --to=sean.j.christopherson@intel.com \
    --cc=jmattson@google.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mst@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=rkrcmar@redhat.com \
    --cc=weijiang.yang@intel.com \
    --cc=yu-cheng.yu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.