From: Lukasz Majewski <lukma@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/2] watchdog: Split WDT from SPL_WDT
Date: Tue, 4 Jun 2019 23:22:18 +0200 [thread overview]
Message-ID: <20190604232218.2da30272@jawa> (raw)
In-Reply-To: <20190512213453.5884-1-marex@denx.de>
On Sun, 12 May 2019 23:34:52 +0200
Marek Vasut <marex@denx.de> wrote:
> Use CONFIG_IS_ENABLED(WDT) to permit use of WDT in SPL without DM,
> while the full U-Boot can use rich DM/DT WDT driver.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Peng Fan <Peng.Fan@freescale.com>
> Cc: Stefano Babic <sbabic@denx.de>
> ---
> common/board_r.c | 2 +-
> common/spl/spl.c | 2 +-
> drivers/watchdog/Makefile | 2 +-
> include/asm-generic/global_data.h | 2 +-
> include/wdt.h | 2 +-
> 5 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/common/board_r.c b/common/board_r.c
> index 150e8cd424..988e40abb2 100644
> --- a/common/board_r.c
> +++ b/common/board_r.c
> @@ -678,7 +678,7 @@ static init_fnc_t init_sequence_r[] = {
> #ifdef CONFIG_DM
> initr_dm,
> #endif
> -#if defined(CONFIG_WDT)
> +#if CONFIG_IS_ENABLED(WDT)
> initr_watchdog,
> #endif
> #if defined(CONFIG_ARM) || defined(CONFIG_NDS32) ||
> defined(CONFIG_RISCV) || \ diff --git a/common/spl/spl.c
> b/common/spl/spl.c index 0a6a47c202..f22f854718 100644
> --- a/common/spl/spl.c
> +++ b/common/spl/spl.c
> @@ -601,7 +601,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
> spl_board_init();
> #endif
>
> -#if defined(CONFIG_SPL_WATCHDOG_SUPPORT) && defined(CONFIG_WDT)
> +#if defined(CONFIG_SPL_WATCHDOG_SUPPORT) && CONFIG_IS_ENABLED(WDT)
> initr_watchdog();
> #endif
>
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 40b2f4bc66..4b94ae988c 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -16,7 +16,7 @@ obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
> obj-$(CONFIG_DESIGNWARE_WATCHDOG) += designware_wdt.o
> obj-$(CONFIG_TANGIER_WATCHDOG) += tangier_wdt.o
> obj-$(CONFIG_ULP_WATCHDOG) += ulp_wdog.o
> -obj-$(CONFIG_WDT) += wdt-uclass.o
> +obj-$(CONFIG_$(SPL_TPL_)WDT) += wdt-uclass.o
> obj-$(CONFIG_WDT_SANDBOX) += sandbox_wdt.o
> obj-$(CONFIG_WDT_ARMADA_37XX) += armada-37xx-wdt.o
> obj-$(CONFIG_WDT_ASPEED) += ast_wdt.o
> diff --git a/include/asm-generic/global_data.h
> b/include/asm-generic/global_data.h index 02a3ed6838..7c2220643b
> 100644 --- a/include/asm-generic/global_data.h
> +++ b/include/asm-generic/global_data.h
> @@ -137,7 +137,7 @@ typedef struct global_data {
> #if defined(CONFIG_TRANSLATION_OFFSET)
> fdt_addr_t translation_offset; /* optional
> translation offset */ #endif
> -#if defined(CONFIG_WDT)
> +#if CONFIG_IS_ENABLED(WDT)
> struct udevice *watchdog_dev;
> #endif
> } gd_t;
> diff --git a/include/wdt.h b/include/wdt.h
> index aa77d3e9b4..5bcff24ab3 100644
> --- a/include/wdt.h
> +++ b/include/wdt.h
> @@ -106,7 +106,7 @@ struct wdt_ops {
> int (*expire_now)(struct udevice *dev, ulong flags);
> };
>
> -#if defined(CONFIG_WDT)
> +#if CONFIG_IS_ENABLED(WDT)
> #ifndef CONFIG_WATCHDOG_TIMEOUT_MSECS
> #define CONFIG_WATCHDOG_TIMEOUT_MSECS (60 * 1000)
> #endif
Tested-by: Lukasz Majewski <lukma@denx.de>
Test HW: display5 i.MX6Q device
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190604/1b014a93/attachment.sig>
next prev parent reply other threads:[~2019-06-04 21:22 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-12 21:34 [U-Boot] [PATCH 1/2] watchdog: Split WDT from SPL_WDT Marek Vasut
2019-05-12 21:34 ` [U-Boot] [PATCH 2/2] watchdog: imx: Add DM support Marek Vasut
2019-05-15 5:54 ` Peng Fan
2019-06-04 21:21 ` Lukasz Majewski
2019-05-15 5:46 ` [U-Boot] [PATCH 1/2] watchdog: Split WDT from SPL_WDT Peng Fan
2019-06-04 21:22 ` Lukasz Majewski [this message]
2019-06-05 16:24 ` Lukasz Majewski
2019-06-06 7:09 ` Lukasz Majewski
2019-06-06 7:26 ` Marek Vasut
2019-06-06 8:00 ` Lukasz Majewski
2019-06-06 8:08 ` Marek Vasut
2019-06-06 8:16 ` Lukasz Majewski
2019-06-06 8:23 ` Marek Vasut
2019-06-06 8:28 ` Lukasz Majewski
2019-06-08 6:23 ` Lukasz Majewski
2019-06-08 15:32 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190604232218.2da30272@jawa \
--to=lukma@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.