From: Sam Ravnborg <sam@ravnborg.org>
To: Josef Lusticky <josef@lusticky.cz>
Cc: dri-devel@lists.freedesktop.org
Subject: Re: [PATCH 2/2] dt-bindings: panel: Add Ilitek ILI9341 panel documentation
Date: Wed, 5 Jun 2019 23:16:48 +0200 [thread overview]
Message-ID: <20190605211648.GA2348@ravnborg.org> (raw)
In-Reply-To: <20190219132101.27196-3-josef@lusticky.cz>
Hi Josef.
Please follow guidelines in
Documentation/devicetree/bindings/submitting...
You will among other learn to send this patch to the right mailing list.
And please add a short summary in the changelog body.
The changelog body shall not require the reader to rtead subject to know
what the patch contains.
In next revisions, sent to the right list etc. you can add my:
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
On Tue, Feb 19, 2019 at 02:21:01PM +0100, Josef Lusticky wrote:
> ---
> .../bindings/display/panel/ilitek,ili9341.txt | 33 +++++++++++++++++++
> 1 file changed, 33 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9341.txt
>
> diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.txt b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.txt
> new file mode 100644
> index 000000000000..4e0e483bc12e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.txt
> @@ -0,0 +1,33 @@
> +Ilitek ILI9341 TFT panel driver with SPI control bus
> +
> +This is a driver for 240x320 TFT panels with parallel RGB color input.
> +
> +Required properties:
> + - compatible: "displaytech,dt024ctft", "ilitek,ili9341"
> + - backlight: phandle of the backlight device attached to the panel
> +
> +Optional properties:
> + - dc-gpios: a GPIO spec for the Data/Command pin, see gpio/gpio.txt
> + - reset-gpios: a GPIO spec for the reset pin, see gpio/gpio.txt
> +
> +The panel must obey the rules for a SPI slave device as specified in
> +spi/spi-bus.txt
> +
> +The device node can contain one 'port' child node with one child
> +'endpoint' node, according to the bindings defined in
> +media/video-interfaces.txt. This node should describe panel's video bus.
> +
> +Example:
> +
> +panel@0 {
> + compatible = "displaytech,dt024ctft", "ilitek,ili9341";
> + reg = <0>;
> + backlight = <&backlight>;
> + dc-gpios = <&pio 4 9 GPIO_ACTIVE_HIGH>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&display_out>;
> + };
> + };
> +};
> --
> 2.20.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2019-06-05 21:16 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-19 13:20 [PATCH 0/2] Add DRM panel driver for Ilitek ILI9341 based panels in parallel RGB mode Josef Lusticky
2019-02-19 13:21 ` [PATCH 1/2] drm/panel: Add Ilitek ILI9341 parallel RGB panel driver Josef Lusticky
2019-06-05 21:21 ` Sam Ravnborg
2019-02-19 13:21 ` [PATCH 2/2] dt-bindings: panel: Add Ilitek ILI9341 panel documentation Josef Lusticky
2019-06-05 21:16 ` Sam Ravnborg [this message]
2019-06-26 12:57 ` [PATCH 0/2] Add DRM panel driver for Ilitek ILI9341 based panels in parallel RGB mode Sam Ravnborg
2019-06-26 15:21 ` Josef Luštický
2019-06-26 16:04 ` Sam Ravnborg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190605211648.GA2348@ravnborg.org \
--to=sam@ravnborg.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=josef@lusticky.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.