All of lore.kernel.org
 help / color / mirror / Atom feed
From: minwoo.im.dev@gmail.com (Minwoo Im)
Subject: [PATCH 3/3] nvme-pci: adjust irq max_vector using num_possible_cpus()
Date: Sun,  9 Jun 2019 03:02:19 +0900	[thread overview]
Message-ID: <20190608180219.17523-4-minwoo.im.dev@gmail.com> (raw)
In-Reply-To: <20190608180219.17523-1-minwoo.im.dev@gmail.com>

If the "irq_queues" are greater than num_possible_cpus(),
nvme_calc_irq_sets() can have irq set_size for HCTX_TYPE_DEFAULT greater
than it can be afforded.
2039         affd->set_size[HCTX_TYPE_DEFAULT] = nrirqs - nr_read_queues;

It might cause a WARN() from the irq_build_affinity_masks() like [1]:
220         if (nr_present < numvecs)
221                 WARN_ON(nr_present + nr_others < numvecs);

This patch prevents it from the WARN() by adjusting the max_vector value
from the nvme_setup_irqs().

[1] WARN messages when modprobe nvme write_queues=32 poll_queues=0:
root at target:~/nvme# nproc
8
root at target:~/nvme# modprobe nvme write_queues=32 poll_queues=0
[   17.925326] nvme nvme0: pci function 0000:00:04.0
[   17.940601] WARNING: CPU: 3 PID: 1030 at kernel/irq/affinity.c:221 irq_create_affinity_masks+0x222/0x330
[   17.940602] Modules linked in: nvme nvme_core [last unloaded: nvme]
[   17.940605] CPU: 3 PID: 1030 Comm: kworker/u17:4 Tainted: G        W         5.1.0+ #156
[   17.940605] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[   17.940608] Workqueue: nvme-reset-wq nvme_reset_work [nvme]
[   17.940609] RIP: 0010:irq_create_affinity_masks+0x222/0x330
[   17.940611] Code: 4c 8d 4c 24 28 4c 8d 44 24 30 e8 c9 fa ff ff 89 44 24 18 e8 c0 38 fa ff 8b 44 24 18 44 8b 54 24 1c 5a 44 01 d0 41 39 c4 76 02 <0f> 0b 48 89 df 44 01 e5 e8 f1 ce 10 00 48 8b 34 24 44 89 f0 44 01
[   17.940611] RSP: 0018:ffffc90002277c50 EFLAGS: 00010216
[   17.940612] RAX: 0000000000000008 RBX: ffff88807ca48860 RCX: 0000000000000000
[   17.940612] RDX: ffff88807bc03800 RSI: 0000000000000020 RDI: 0000000000000000
[   17.940613] RBP: 0000000000000001 R08: ffffc90002277c78 R09: ffffc90002277c70
[   17.940613] R10: 0000000000000008 R11: 0000000000000001 R12: 0000000000000020
[   17.940614] R13: 0000000000025d08 R14: 0000000000000001 R15: ffff88807bc03800
[   17.940614] FS:  0000000000000000(0000) GS:ffff88807db80000(0000) knlGS:0000000000000000
[   17.940616] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   17.940617] CR2: 00005635e583f790 CR3: 000000000240a000 CR4: 00000000000006e0
[   17.940617] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   17.940618] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   17.940618] Call Trace:
[   17.940622]  __pci_enable_msix_range+0x215/0x540
[   17.940623]  ? kernfs_put+0x117/0x160
[   17.940625]  pci_alloc_irq_vectors_affinity+0x74/0x110
[   17.940626]  nvme_reset_work+0xc30/0x1397 [nvme]
[   17.940628]  ? __switch_to_asm+0x34/0x70
[   17.940628]  ? __switch_to_asm+0x40/0x70
[   17.940629]  ? __switch_to_asm+0x34/0x70
[   17.940630]  ? __switch_to_asm+0x40/0x70
[   17.940630]  ? __switch_to_asm+0x34/0x70
[   17.940631]  ? __switch_to_asm+0x40/0x70
[   17.940632]  ? nvme_irq_check+0x30/0x30 [nvme]
[   17.940633]  process_one_work+0x20b/0x3e0
[   17.940634]  worker_thread+0x1f9/0x3d0
[   17.940635]  ? cancel_delayed_work+0xa0/0xa0
[   17.940636]  kthread+0x117/0x120
[   17.940637]  ? kthread_stop+0xf0/0xf0
[   17.940638]  ret_from_fork+0x3a/0x50
[   17.940639] ---[ end trace aca8a131361cd42a ]---
[   17.942124] nvme nvme0: 7/1/0 default/read/poll queues

Cc: Jens Axboe <axboe at fb.com>
Cc: Ming Lei <ming.lei at redhat.com>
Cc: Keith Busch <kbusch at kernel.org>
Cc: Christoph Hellwig <hch at lst.de>
Cc: Sagi Grimberg <sagi at grimberg.me>
Signed-off-by: Minwoo Im <minwoo.im.dev at gmail.com>
---
 drivers/nvme/host/pci.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 20193b11ab0d..52fe785295cb 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -2051,6 +2051,7 @@ static int nvme_setup_irqs(struct nvme_dev *dev, unsigned int nr_io_queues)
 		.priv		= dev,
 	};
 	unsigned int irq_queues, this_p_queues;
+	unsigned int nr_cpus = num_possible_cpus();
 
 	/*
 	 * Poll queues don't need interrupts, but we need at least one IO
@@ -2061,7 +2062,10 @@ static int nvme_setup_irqs(struct nvme_dev *dev, unsigned int nr_io_queues)
 		this_p_queues = nr_io_queues - 1;
 		irq_queues = 1;
 	} else {
-		irq_queues = nr_io_queues - this_p_queues + 1;
+		if (nr_cpus < nr_io_queues - this_p_queues)
+			irq_queues = nr_cpus + 1;
+		else
+			irq_queues = nr_io_queues - this_p_queues + 1;
 	}
 	dev->io_queues[HCTX_TYPE_POLL] = this_p_queues;
 
-- 
2.21.0

      parent reply	other threads:[~2019-06-08 18:02 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-08 18:02 [PATCH 0/3] nvme-pci: adjust irq max_vector to avoid WARN() Minwoo Im
2019-06-08 18:02 ` [PATCH 1/3] nvme-pci: remove unnecessary zero for static var Minwoo Im
2019-06-08 20:27   ` Chaitanya Kulkarni
2019-06-08 18:02 ` [PATCH 2/3] nvme-pci: remove queue_count_ops for write,poll_queues Minwoo Im
2019-06-10  1:51   ` Ming Lei
2019-06-10  2:25     ` Minwoo Im
2019-06-10  2:41       ` Ming Lei
2019-06-10  3:41         ` Minwoo Im
2019-06-10  3:49           ` [PATCH 2/3] nvme-pci: remove queue_count_ops for write, poll_queues Ming Lei
2019-06-10  3:52             ` Minwoo Im
2019-06-16  4:51               ` [PATCH 2/3] nvme-pci: remove queue_count_ops for write,poll_queues Minwoo Im
2019-06-20  6:25                 ` Christoph Hellwig
2019-06-08 18:02 ` Minwoo Im [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190608180219.17523-4-minwoo.im.dev@gmail.com \
    --to=minwoo.im.dev@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.