From: Lukasz Majewski <lukma@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v1 05/11] ARM: display5: Increase the pre-relocation malloc pool size to 4KiB
Date: Mon, 10 Jun 2019 08:04:22 +0200 [thread overview]
Message-ID: <20190610080422.4faad15f@jawa> (raw)
In-Reply-To: <AM0PR04MB44818D28C65D3943ADF63AE088130@AM0PR04MB4481.eurprd04.prod.outlook.com>
Hi Peng,
> > Subject: [PATCH v1 05/11] ARM: display5: Increase the
> > pre-relocation malloc pool size to 4KiB
> >
> > Porting more DTS code from Linux kernel for display5 board required
> > increase of pre-relocation malloc pool size in U-Boot proper.
> >
> > The early malloc memory is necessary for handling parsing and setup
> > of e.g. serial port device (and all its ancestors in DT tree).
> >
> > Signed-off-by: Lukasz Majewski <lukma@denx.de>
> > ---
> >
> > configs/display5_defconfig | 3 +++
> > 1 file changed, 3 insertions(+)
> >
> > diff --git a/configs/display5_defconfig
> > b/configs/display5_defconfig index 3b793f4500..0ef56024e9 100644
> > --- a/configs/display5_defconfig
> > +++ b/configs/display5_defconfig
> > @@ -4,16 +4,19 @@ CONFIG_SYS_TEXT_BASE=0x17800000
> > CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y
> > CONFIG_SPL_LIBGENERIC_SUPPORT=y
> > +CONFIG_SYS_MALLOC_F_LEN=0x1000
> > CONFIG_MX6_DDRCAL=y
> > CONFIG_TARGET_DISPLAY5=y
> > CONFIG_SPL_MMC_SUPPORT=y
> > CONFIG_SPL_SERIAL_SUPPORT=y
> > +CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
> > CONFIG_NR_DRAM_BANKS=1
> > CONFIG_SPL=y
> > CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
> > CONFIG_SYS_BOOTCOUNT_ADDR=0x020CC068
> > CONFIG_SPL_SPI_FLASH_SUPPORT=y
> > CONFIG_SPL_SPI_SUPPORT=y
> > +CONFIG_TPL_SYS_MALLOC_F_LEN=0x400
>
> Acked-by: Peng Fan <peng.fan@nxp.com>
> Just a question, TPL is enabled for this platform?
No, display5 is not using TPL. This CONFIG_TPL_SYS_MALLOC_F_LEN seems
to be enabled by default when setting SPL counterpart.
>
> > CONFIG_FIT=y
> > CONFIG_SPL_LOAD_FIT=y
> > CONFIG_OF_BOARD_SETUP=y
> > --
> > 2.11.0
>
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190610/486d339d/attachment.sig>
next prev parent reply other threads:[~2019-06-10 6:04 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-09 20:54 [U-Boot] [PATCH v1 00/11] DM: display5: Convert display5 board to DM/DTS (including 'factory' setup) Lukasz Majewski
2019-06-09 20:54 ` [U-Boot] [PATCH v1 01/11] cosmetic: display5: Remove not needed comments Lukasz Majewski
2019-06-10 1:36 ` Peng Fan
2019-07-20 8:57 ` sbabic at denx.de
2019-06-09 20:54 ` [U-Boot] [PATCH v1 02/11] cosmetic: Update comment in cmd/eeprom.c Lukasz Majewski
2019-06-10 1:36 ` Peng Fan
2019-07-20 8:45 ` sbabic at denx.de
2019-06-09 20:54 ` [U-Boot] [PATCH v1 03/11] ARM: display5: Fix CS check after moving some SPI related CONFIGs to Kconfig Lukasz Majewski
2019-07-20 8:46 ` sbabic at denx.de
2019-06-09 20:54 ` [U-Boot] [PATCH v1 04/11] gpio: Add missing parenthesis to the GPIO_TO_PORT define Lukasz Majewski
2019-06-10 1:38 ` Peng Fan
2019-07-20 8:46 ` sbabic at denx.de
2019-06-09 20:54 ` [U-Boot] [PATCH v1 05/11] ARM: display5: Increase the pre-relocation malloc pool size to 4KiB Lukasz Majewski
2019-06-10 1:41 ` Peng Fan
2019-06-10 6:04 ` Lukasz Majewski [this message]
2019-06-10 6:43 ` Peng Fan
2019-07-20 8:46 ` sbabic at denx.de
2019-06-09 20:54 ` [U-Boot] [PATCH v1 06/11] DTS: imx: Add display5 board (imx6q based) device tree description (v5.1) Lukasz Majewski
2019-06-10 1:41 ` Peng Fan
2019-07-20 8:57 ` sbabic at denx.de
2019-06-09 20:54 ` [U-Boot] [PATCH v1 07/11] DTS: Add imx6q-display5-u-boot.dtsi file with u-boot specific properties Lukasz Majewski
2019-06-10 1:43 ` Peng Fan
2019-06-10 10:52 ` Adam Ford
2019-06-10 12:23 ` Lukasz Majewski
2019-07-20 8:45 ` sbabic at denx.de
2019-06-09 20:54 ` [U-Boot] [PATCH v1 08/11] ARM: display5: Remove U_BOOT_DEVICE definition of serial_mxc Lukasz Majewski
2019-06-10 1:44 ` Peng Fan
2019-07-20 8:45 ` sbabic at denx.de
2019-06-09 20:54 ` [U-Boot] [PATCH v1 09/11] DM: display5: Convert display5 board to use DM/DTS Lukasz Majewski
2019-06-10 1:45 ` Peng Fan
2019-06-09 20:54 ` [U-Boot] [PATCH v1 10/11] ARM: display5: Remove UART initialization code after DM/DTS conversion (non-console) Lukasz Majewski
2019-06-10 1:44 ` Peng Fan
2019-06-09 20:54 ` [U-Boot] [PATCH v1 11/11] ARM: display5: Remove common.c file (after DM/DTS U-Boot proper conversion) Lukasz Majewski
2019-06-10 1:46 ` Peng Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190610080422.4faad15f@jawa \
--to=lukma@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.